modular letter

FCC ID: RI7DE910-DUAL

Cover Letter(s)

Download: PDF
FCCID_1607414

Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification 2011.12.6 Dear: Reviewing Engineer We, Telit Wireless Solutions Co., Ltd., hereby requests for licensed modular transmitter approval of our device, described as follows: FCC ID: RI7DE910-DUAL Request for modular approval Transmitter Module Characteristics 1. The modular transmitter must have its own shielding. The DUT does provide RF shielding. Refer to DUT picture. 2. The modular transmitter must have buffered modulation/data inputs All inputs to the modules are buffered through logic or microprocessor inputs. 3. The modular transmitter must have its own power supply regulation The DUT has its own power supply regulation it’s integrated in PMIC chip 4. The modular transmitter must comply with the antenna requirements of Section 15.203 Device is equipped with antenna SMT pad. Refer to H/W user guide. 5. The modular transmitter must be tested in a stand-alone configuration

The DUT was tested in a stand-alone configuration via a test kit. Refer to H/W User Guide. 6. The modular transmitter must be labelled with its own FCC ID number Refer to label provided. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. Refer to H/W User Guide. 8. The modular transmitter must comply with any applicable RF exposure requirements. MPE was calculated. Sincerely, Brian Tucker Global VP, Quality Telit Communications S.p.A.


Document Created: 2011-12-12 18:23:28
Document Modified: 2011-12-12 18:23:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC