MPE Report

FCC ID: RHDPTRL-940-960

RF Exposure Info

Download: PDF
FCCID_4474307

849 NW STATE ROAD 45 PHONE: 888.472.2424 OR 352.472.5500 NEWBERRY, FL 32669 USA EMAIL: INFO@TIMCOENGR.COM WEB: HTTP://WWW.TIMCOENGR.COM An IIA Company RF Exposure Evaluation Report APPLICANT R.V.R. USA. 7782 NW 46 Street ADDRESS Miami FL 33166 USA FCC ID RHDPTRL-940-960 MODEL NUMBER PTRL-LCD PRODUCT DESCRIPTION FM BROADCAST TRANSMITTER DATE SAMPLE RECEIVED 08/01/2019 FINAL TEST DATE 08/12/2019 PREPARED BY Tim Royer TEST RESULTS PASS FAIL Report Number Report Version Description Issue Date 1999UT19 Rev1 Initial Issue 08/02/2019 MPE_TestReport_ 1999UT19 MPE Distance Rev2 09/24/2019 MPE_TestReport_ Recalculated THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC.

TABLE OF CONTENTS GENERAL REMARKS ........................................................................................................ 2 GENERAL INFORMATION ................................................................................................ 3 ANTENNA INFORMATION ............................................................................................... 3 MPE CALCULATION ......................................................................................................... 3 MPE TABLE ..................................................................................................................... 5 GENERAL UNCONTROLLED EXPOSURE ......................................................................................... 5 GENERAL CONTROLLED EXPOSURE ............................................................................................ 6

GENERAL REMARKS Summary The device under test does: Fulfill the general approval requirements as identified in this test report and was selected by the customer. Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Designation #: US1070 Prepared by: Name and Title Tim Royer, Project Manager / EMC Testing Engineer Date 08/12/2019 Applicant: R.V.R. USA. FCC ID: RHDPTRL-940-960 Report: 1999UT19 MPE_TestReport_Rev2 Page 2 of 6

GENERAL INFORMATION EUT Description FM BROADCAST TRANSMITTER Model Number PTRL-LCD ☒110–120Vac, 50– EUT Power Source ☐ DC Power ☐ Battery Operated 60Hz ☐ Engineering Test Item ☒ Pre-Production ☐ Production Prototype Type of Equipment ☒ Fixed ☐ Mobile ☐ Portable Antenna Connector external N Type The temperature was 26ºC Test Conditions Relative humidity of 50%. Modification to the EUT No Modification to EUT. Applicable Standards FCC CFR 47 Part 2.1091 Timco Engineering Inc. at 849 NW State Road 45 Newberry, FL Test Facility 32669 USA. Designation #: US1070 ANTENNA INFORMATION Manufacturer Provides Max Gain Type Antenna (dBi) No Unspecified 0 dBi POWER OUTPUT OF EUT Frequency Output Power Output Power (MHz) (dBm) (W) 941.70 42.13 16.33 Applicant: R.V.R. USA. FCC ID: RHDPTRL-940-960 Report: 1999UT19 MPE_TestReport_Rev2 Page 3 of 6

MPE CALCULATION The minimum separation distance is calculated as follows: 2 30x PxG E E(V / m) = —————— Power density: Pd[mchmz)=— d 3770 MPE LI MITS Figure 1. FCC Limits for Maximum Permissible Exposure (MPE) Plane—wave Equivalent Power Density 1,000 TT T T To T T Occupational/Contralled Exposure = General Population/Uncontrolled Exposure 100}— — = 2 ; 10 7| € 5 1 1— 4 o2l —4 0.1 1 1_1 i 1 i _1 1 1 003 0.3 I 3 30 300 I.s.auu $0,000 + 300,000 1.34 1600 100,000 Frequency (MHz) Applicant: R.V.R. USA. FCC ID: RHDPTRL—940—960 Report: 1999UT19 MPE_TestReport_Rev2 Page 4 of 6

MPE Table General Uncontrolled Exposure The limit for General Uncontrolled Exposure Environment is calculated as shown in FCC Pt. 1.1310, Table B: Variable Value Max Power 16.33 W Frequency Range 941.5 – 959.85 MHz Duty Cycle (at full power) 100% Max Antenna Gain 0 dBi Coax Loss 0 dB Power Density 0.63 mW/cm2 Minimum Separation Distance 45.51 cm 2 45.51 cm 0.63 mW/cm 2 20 cm 3.25 mW/cm (Standard MPE Distance) EUT Applicant: R.V.R. USA. FCC ID: RHDPTRL-940-960 Report: 1999UT19 MPE_TestReport_Rev2 Page 5 of 6

General Controlled Exposure The limit for General Controlled Exposure Environment is calculated as shown in FCC Pt. 1.1310, Table A: Variable Value Max Power 16.33 W Frequency Range 941.5 – 959.85 MHz Duty Cycle (at full power) 100% Max Antenna Gain 0 dBi Coax Loss 0 dB Power Density 3.14 mW/cm2 Minimum Separation Distance 20.35 cm 2 20.35 cm 3.14 mW/cm 2 20 cm 3.25 mW/cm (Standard MPE Distance) EUT Applicant: R.V.R. USA. FCC ID: RHDPTRL-940-960 Report: 1999UT19 MPE_TestReport_Rev2 Page 6 of 6


Document Created: 2019-10-11 06:28:07
Document Modified: 2019-10-11 06:28:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC