User Manual

FCC ID: RGB-44CRDS

Users Manual

Download: PDF
FCCID_2673853

Item #1001 xxx xxx Model # 51549, 51543 UL Model # 44-CRD USE AND CARE GUIDE CORRADO 44-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 12 Warranty................................................................................ 3 Care and Cleaning.............................................................. 14 Pre-Installation..................................................................... 3 Troubleshooting.................................................................. 14 Installation............................................................................. 6 Safety Information READ AND SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as 1. To reduce the risk of electric shock, ensure the electricity has flanges) during assembly or after installation. Do not insert objects in the path of the blades. been turned off at the circuit breaker or fuse box before you begin. WARNING: To reduce the risk of fire or electric 2. All wiring must be in accordance with the National Electrical shock, do not use this fan with any solid-state speed Code ANSI/NFPA 70 and local electrical codes. Electrical control device. installation should be performed by a qualified licensed electrician. WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before 3. The outlet box and support structure must be securely mounted wiring. If you feel you do not have enough electrical and capable of reliably supporting a minimum of 35 lbs. (15.9 wiring knowledge or experience, contact a licensed electrician. kg). Use only UL-listed outlet boxes marked “Acceptable for Fan Support of 35 lbs. (15.9 kg) or less.” WARNING: To reduce the risk of fire, electric shock 4. The fan must be mounted with a minimum of 7 ft (2.1 m) of or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 kg) or clearance from the trailing edge of the blades to the floor. less”, and use screws provided with the outlet box. 5. Do not place objects in the path of the blades. WARNING: Electrical diagrams are for reference 6. To avoid personal injury or damage to the fan and other items, only. If you are using a light kit, refer to the light kit use caution when working around or cleaning the fan. instructions manual to make the electrical connections. Optional use of any light kit shall be 7. After making electrical connections, spliced conductors should UL-listed and marked suitable for use with this fan. be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor WARNING: To reduce the risk of fire or electric and the equipment-grounding conductor on one side of the shock, this fan should only be used with fan speed outlet box. control part no. MR140A, manufactured by Satellite Electronic Co., LTD. 8. All set screws must be checked and retightened where necessary before installation. WARNING: To reduce the risk of electric shock, this fan must be installed with an isolating wall switch. CAUTION: To reduce the risk of personal injury, CAUTION: Changes or modifications not expressly use only the screws provided with the outlet box. approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Do NOT use this fan with a dimmer switch or wall control. Using a dimmer switch or wall control This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does will damage the fan. cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: - Reorient the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules, operation is subject to the following two conditions. (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. 2

Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Home Decorators Collection hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer. Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators. Pre-Installation SPECIFICATIONS Fan Power Airflow Efficiency Consumption Airflow Net Gross Size Speed Volts (Higher Is Better) Cubic Feet (without lights) CFM Weight Weight CFM/WATT WATT 1 x xxxx xxxx 2 x xxxx xxxx xx lbs xx lbs 44 in. 120 xx pies³ (x m³) 3 x xxxx xxxx (x kgs) (x kgs) 4 x xxxx xxxx NOTE: These are approximate measures. They do not include the Amps and Wattage used by the light kit. 3 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.

Pre-Installation (continued) TOOLS REQUIRED Phillips Flat blade Adjustable Electrical Wire cutter screwdriver screwdriver wrench tape / Stripper Step ladder HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB Part Description Quantity AA Blade attachment screws 16 BB Plastic wire connecting nut 3 4

Pre-Installation (continued) PACKAGE CONTENTS A D E B F C G Part Description Quantity Part Description Quantity Slide-on mounting bracket E Glass bowl 1 A 1 (inside canopy) F Receiver 1 B Fan-motor assembly 1 G Transmitter (battery included) 1 C Blade 5 D Light kit fitter assembly (LED included) 1 IMPORTANT: This product and/or components are governed by one or more of the following U.S. Patents: 5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117 and other patents pending. 5 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.

Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 Kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician. If your ceiling fan does not have an existing UL-listed mounting box, then install one using the following instructions: □□ Disconnect the power by removing the fuses or turning off the circuit breakers. □□ Secure the outlet box directly to the building structure. Use the appropriate fasteners and materials. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs. (15.9kg). Use only UL-listed outlet boxes marked “Acceptable for fan support of 35 lbs. (15.9 Kg) or less” Do not use a plastic outlet box. The illustrations below show three different ways to mount the outlet box. Outlet Box Outlet Box Hanger Bar Outlet Box NOTE: To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar as shown above (available at any Home Depot store). 6

Assembly - Standard Ceiling Mount 1 Preparing for mounting □□ Remove the canopy ring (EE) from the fan motor assembly CC A (B) by turning the ring counterclockwise until it unlocks. □□ Remove the mounting bracket (A) from the fan motor assembly (B) by loosening the two canopy screws (CC) DD located in the “L shaped” slots. B □□ Remove and save the two canopy screws (DD) in the round holes. This will enable you to remove the mounting bracket EE (A). Assembly - Hanging the Fan 1 Attaching the fan to the electrical box WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. 15.9 kg) or less”, and use screws provided with the outlet box. NOTE: The mounting bracket (A) is designed to slide into place on an outlet box with the outlet box screws (II) installed. II II □□ Loosen the two mounting screws (II) in the outlet box. A □□ Pass the 120-Volt supply wires through the center hole in the mounting bracket (A). □□ Slide the mounting bracket (A) on to the mounting screws (II) and center the mounting bracket (A) in relation to the outlet box. If necessary, use leveling washers (not included) between the slide-on mounting bracket (A) and the outlet box. The flat side of the slide-on mounting bracket (A) should face toward the outlet box, as shown. □□ Securely tighten the two mounting screws (II). 7 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan (continued) 2 Hanging the fan 3 Setting the code on the remote control and receiver WARNING: The hook (FF) is only to balance the fan while NOTE: The frequencies on your receiver and hand unit have making the electrical connections. Failure to hang as shown been preset at the factory. Before installing the receiver, may result in the hook (FF) breaking, causing the fan to fall. make sure the dip switches on the receiver and hand unit are The hook must pass from the inside to the outside of the set to the same frequency. The dip switches on the hand unit canopy. are located inside the battery compartment. WARNING: When hanging the fan on the hook (FF) it is critical NOTE: The switch marked O/D controls the dimming function that you use one of the non-slotted (round) holes in the fan- of the light. Use a ballpoint pen or small screwdriver to motor assembly (B). switch to O to disable the dimming function. The factory preset is D. □□ Carefully lift the fan-motor assembly (B) up to the slide-on mounting bracket (A). NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the □□ Hang the fan on the hook (FF) provided by utilizing one of hand unit. Dispose of used battery properly and keep the the non-slotted (round) holes at the outer rim of the fan- battery out of the reach of children. motor assembly (B). □□ Remove the remote control (G) battery cover by pressing firmly on the arrow and sliding the cover off. □□ Slide the dip switches to your choice of either up or down. The factory setting is up. □□ Slide the dip switches (ZZ) on the receiver (F) to the same FF position as set on the remote control (G). □□ Install two 1.5V AAA batteries (included). A □□ Replace the battery cover on the remote control (G). □□ Insert the silicone rubber stopper (OO) into the hole on the receiver (F) to cover the dip switches. 1 EE ON D O 2 3 B 4 1 ON ZZ D O 2 3 4 G ON 1 2 3 4 OO F 1 2 3 4 ON DIP 8

Assembly - Hanging the Fan (continued) 4 Installing the receiver 5 Wiring the receiver to the household wiring WARNING: To reduce the risk of fire or electric shock, WARNING: To avoid possible electrical shock, turn the remember to disconnect power. The electrical wiring must electricity off at the main fuse box before wiring. If you meet all local and national electrical code requirements. feel you do not have enough electrical wiring knowledge or The electrical source and fan must be 110/120 volt, 60Hz. experience, contact a licensed electrician. Do not use this product in conjunction with any variable wall control. Incorrect wire connection can damage this receiver. WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the CAUTION: If other fan wires are a different color, have this fan. If you have larger than 12-gauge house wiring or more unit installed by a licensed electrician. than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. CAUTION: Do not install the receiver in a damp location or IMPORTANT: Use the wire connecting nuts (BB) supplied immerse in water (For indoor use only). Do not pull on or cut with your fan. Secure the connectors with electrical tape and the receiver leads shorter. Do not drop or bump the unit. ensure there are no loose strands or connections. □□ Position the house supply wires (AAA) to one side of the slide-on mounting bracket (A); position the fan wires (BBB) □□ Spread the wires apart so that the green and white wires to the opposite side. are on one side of the outlet box and the black wire is on the other side. □□ Insert the narrow end of the receiver (as shown, flat side □□ Connect the green fan wires to the household ground wire towards the ceiling) into the slide-on mounting bracket until (this may be a green or bare wire) using a wire connecting it rests on top of the ball/downrod assembly. nut (BB). □□ Connect the receiver black (or red) wire to the household black (hot) wire using a wire connecting nut (BB). □□ Connect the receiver (F) white wire to the household white wire (neutral) wire using a wire connecting nut (BB). □□ Secure each wire connecting nut using electrical tape. J Outlet Box in the ceiling A (GG) Green (or Bare) Black BB (x3) White Green AAA Black White (or Red) BBB Receiver Antenna ON DIP 1 2 3 4 Receiver (F) 9 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan (continued) 6 Making the electrical connection 7 Mounting the fan-motor assembly WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the WARNING: The locking slots of ceiling canopy are provided only fan. If you have larger than 12-gauge house wiring or more as an aid to mounting. Do not leave the fan assembly unattended than one house wire to connect to the fan wiring, consult an until all four canopy screws are engaged and firmly tightened. electrician for the proper size wire nuts to use. □□ Align the locking slots of the fan-motor assembly (B) with the IMPORTANT: Use the plastic wire connectors (BB) supplied with two screws (CC) in the slide-on mounting bracket (A). Push up your fan. Secure the connectors with electrical tape and ensure to engage the slots, and turn clockwise to lock the fan-motor there are no loose strands or connections. assembly (B) in place. □□ Firmly tighten the two mounting screws (CC). □□ Connect the fan motor green wires to the household green or bare wire using a wire connecting nut (BB). □□ Install the two mounting screws (saved from Assembly Step □□ Connect the fan motor white wires to the household white 1 “Preparing for mounting”) into the holes in the fan-motor wire using a wire connecting nut (BB). assembly (B) and tighten firmly. □□ Connect the fan motor black wires to the household black □□ Install the decorative canopy ring (EE) by aligning the ring’s wire using a wire connecting nut (BB). slots with the screws in the fan-motor assembly (B). Rotate □□ Secure each wire connecting nut using electrical tape. the canopy ring (EE) counterclockwise to lock it in place. □□ Turn the wire connecting nut (BB) upward and push the wiring into the outlet box (GG). A CC Outlet box in the ceiling (GG) EE Green Receiver (F) Receiver Antenna B ON DIP 1 2 3 4 Blue Black White BB (x3) 10

Assembly - Hanging the Fan (continued) 8 Attaching the fan blades 9 Attaching the light kit fitter assembly □□ Attach a blade (C) to the fan-motor housing (B) by inserting □□ Attach the light kit fitter assembly (D), remove the one the blade (C) into slots in the side of the fan motor housing screw (HH) in the round hole, from the switch cup (JJ), and (B) and aligning the three screw holes in the blade with the loosen, but do not remove the other three screws. holes in the center flywheel and secure with screws (AA). □□ Connect the blue wire exiting the bottom of the fan motor □□ Make sure all the screws are firmly tightened. assembly (B) with the black wire from the top of the light kit fitter assembly (D). □□ Connect the white wire exiting the bottom of the fan motor assembly (B) with the white wire from the top of the light kit fitter assembly (D). □□ Push the light kit fitter assembly (D) up to the light kit pan so that the three loosened screw heads fit into the keyhole B slots. Turn the light kit fitter assembly (D) clockwise to secure. C □□ Re-install the screw (HH) that was removed in step 1. □□ Make sure all the screws are firmly tightened. AA B JJ D HH 11 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.

Assembly - Hanging the Fan (continued) 10 Installing the glass bowl WARNING: To reduce the risk of injury, allow the glass to cool completely before removing. □□ Place the bowl (E) into the light kit fitter assembly (D), by aligning the three flat areas on the top flange of the D bowl (E) with the three raised dimples in the light kit fitter assembly (D). E □□ Turn the shade clockwise until it stops. Operating Your Fan and Remote Control 1. Power ON/OFF. - Press and release the button to turn the fan on or off. □□ Press and hold the button for 5 seconds to use the “walk away time delay”; this will active the light G for 30 seconds (the light will be activated at 50% brightness). 2. Fan Speed - LEDs on the fan speed button will illuminate to the corresponding speed. - Press and release 1 time - turns the fan on low speed. - Press and release 2 times - turns the fan on medium-low speed. - Press and release 3 times - turns the fan on medium-high speed. - Press and release 4 times - turns the fan on high speed. - Press and release 5 times - turns the fan off. 3. Light ON/OFF □□ Press and release the button to turn the light on or off. □□ Press and hold the button to activate the dimmer function (as long as you have NOT previously set O/D dip switch in your remote to the “ON” position). 4. Comfort BreezeTM □□ Press and hold this button for 3 seconds to enable Comfort BreezeTM; this will change your fan speed randomly, simulating a relaxing breeze. To cancel this feature press or . 5. Fan reverse button (Must be pushed when the fan is in operation) □□ Press and release the button to forward and reverse the fan. 6. Timer - While the fan is on press 1 time - turns on a 2 hour run timer. - While the fan is on press 2 times - turns on a 4 hour run timer. - While the fan is on press 3 times - turns on an 8 hour run timer. 12

Operating Your Fan and Remote Control (continued) Remote Control - Your fan is equipped with a remote control to operate A. Warm weather the speed and lights of your new ceiling fan. Speed setting for warm or cool weather depend on factors such as the room size, ceiling height, number of fans and so on. A. Warm weather - (Forward) A downward airflow creates a cooling effect. This allows you to set your air conditioner on a higher setting without affecting your comfort. B. Cool weather - (Reverse) An upward airflow moves warm air off of the ceiling. This allows you to set your heating unit on a lower setting without affecting your comfort. B. Cool weather NOTE: Do not wait for the fan to stop before pressing the reverse button. The fan will not reverse direction if the fan is not moving. 13 HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.

Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. □□ You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish. □□ You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings. Troubleshooting Problem Solution The fan will not start. □□ Check the main and branch circuit fuses or breakers. □□ Check the line wire connections to the fan and switch wire connections in the switch housing. □□ Check the battery in the remote control. □□ Ensure you are in the normal range of 10-20 feet. □□ Remember to turn off the power supply before checking the dip switch settings. The fan is noisy. □□ Ensure all motor housing screws are snug. □□ Ensure the screws that attach the fan blade bracket to the motor hub are tight. □□ Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing. □□ Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time. □□ If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight. Check that the light bulbs are also secure. □□ Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling. □□ Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box. The fan wobbles. □□ Check that all blade and blade arm screws are secure. □□ Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure from a point on the center of the blade to the point on the ceiling. Rotate the fan until the next blade is positioned for measurement, and measure from the same point on each blade to the ceiling. Repeat for each blade. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes. If the fan continues to wobble please contact Customer Service and a balancing kit will be sent to you at no charge. 14

Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.


Document Created: 2015-07-10 00:18:57
Document Modified: 2015-07-10 00:18:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC