safety instructions

FCC ID: RFFMTD0506

Users Manual

Download: PDF
FCCID_694180

D Safety Instructions Use of the instrument GB F English Permitted use • Measuring distances I The User Manual in a separate brochure, forms a part • Computing functions, e. g. areas and volumes E of the Safety Instructions. • Storing measurements (BLUETOOTH®) P Carefully read the Safety Instruc- tions and the User Manual before Prohibited use NL using this product. • Using the instrument without instruction DK • Using outside the stated limits S The person responsible for the instrument must • Deactivation of safety systems and removal of ensure that all users understand these directions and N explanatory and hazard labels adhere to them. • Opening of the equipment by using tools (screw- FIN drivers, etc.), as far as not specifically permitted Symbols used for certain cases J The symbols used in the Safety Instructions have the • Carrying out modification or conversion of the CN following meanings: product RC  WARNING: Indicates a potentially hazardous situation or • • Use after misappropriation Use of accessories from other manufacturers ROK an unintended use which, if not avoided, will result in without the express approval of Leica Geosys- PL death or serious injury. tems. HR • Deliberate or irresponsible behaviour on scaf-  CAUTION: Indicates a potentially hazardous situation or folding, when using ladders, when measuring H RUS near machines which are running, or near parts of an unintended use which, if not avoided, may result machines or installations which are unprotected in minor injury and/or in appreciable material, finan- CZ • Aiming directly into the sun cial and environmental damage. • Deliberate dazzling of third parties; also in the GR ) Important paragraphs which must be adhered to in practice as they enabled the product to be used • dark Inadequate safeguards at the surveying site (e.g. LT LV in a technically correct and efficient manner. when measuring on roads, construction sites, etc.) EST SLO SK Leica DISTO™ 743363b gb 1 M TR

D GB Responsibilities of the person in charge of the Limits of use instrument: ) F See section “Technical Data“. I  WARNING The person responsible for the instrument E The Leica DISTO™ is designed for use in areas perma- must ensure that the equipment is used in accor- P nently habitable by humans, do not use the product dance with the instructions. This person is also in explosion hazardous areas or in aggressive envi- accountable for the deployment of personnel and for NL ronments. their training and for the safety of the equipment DK when in use. S Areas of responsibility The person in charge of the instrument has the Responsibilities of the manufacturer of the original N following duties: equipment Leica Geosystems AG, CH-9435 Heerbrugg FIN (for short Leica Geosystems): • To understand the safety instructions on the product and the instructions in the User Manual. J Leica Geosystems is responsible for supplying the • To be familiar with local safety regulations product, including the User Manual and original CN relating to accident prevention. accessories, in a completely safe condition. (addi- RC • To inform Leica Geosystems immediately if the tional language versions can be found at: equipment becomes unsafe. ROK www.disto.com. PL Responsibilities of the manufacturer of non- Hazards in use HR Leica accessories:  CAUTION: H RUS ) The manufacturers of non-Leica accessories for the Leica DISTO™ are responsible for developing, Watch out for erroneous distance measure- ments if the instrument is defective or if it has been implementing and communicating safety concepts for dropped or has been misused or modified. CZ their products. They are also responsible for the Precautions: GR effectiviness of these safety concepts in combination Carry out periodic test measurements. Particularly LT with the Leica Geosystems equipment. after the instrument has been subject to abnormal use, and before, during and after important measure- LV ments. EST Make sure the Leica DISTO™ optics is kept clean and SLO that there is no mechanical damage to the bumpers. SK M 2 Leica DISTO™ 743363b gb TR

D  CAUTION: In using the instrument for distance measure-  CAUTION: Aiming the telescopic viewer directly at the sun GB ments or for positioning moving objects (e.g. cranes, or at the reflected laser beam (reflected off metallic F building equipment, platforms, etc.) unforeseen or mirroring surfaces, prisms...) is hazardous to the I events may cause erroneous measurements. eyes. E Precautions: Precautions: P Only use this product as a measuring sensor, not as Never aim the telescopic viewer directly at the sun or NL a control device. Your system must be configured and at highly reflecting surfaces (metallic or mirroring operated in such a way, that in case of an erroneous surfaces, prisms......). DK measurement, malfunction of the device or power S failure due to installed safety measures (e.g. safety Electromagnetic Compatibility (EMC) N limit switch), it is assured that no damage will occur. The term "electromagnetic compatibility" is taken to FIN  WARNING: Flat batteries must not be disposed of with mean the capability of the product to function smoothly in an environment where electromagnetic J household waste. Care for the environment and take radiation and electrostatic discharges are present, CN them to the collection points provided in accordance and without causing electromagnetic interference to other equipment. RC with national or local regulations. The product must not be disposed of with household waste.  WARNING: The Leica DISTO™ conforms to the most strin- ROK PL Dispose of the product appropriately in gent requirements of the relevant standards and HR accordance with the national regulations in regulations. Yet, the possibility of it causing interfer- ence in other devices cannot be totally excluded. H force in your country. Always prevent access to the product by RUS unauthorized personnel. FCC statement (applic. in U.S.) CZ Product specific treatment and waste This equipment has been tested and found to comply GR management information can be downloaded from with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to LT the Leica Geosystems home page at provide reasonable protection against harmful inter- LV http://www.leica-geosystems.com/treatment or ference in a residential installation. received from your Leica Geosystems dealer. EST This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in SLO SK Leica DISTO™ 743363b gb 3 M TR

D GB accordance with the instructions, may cause harmful interference to radio communications. Use of the product with F BLUETOOTH®: However, there is no guarantee that interference will I  not occur in a particular installation. WARNING: E If this equipment does cause harmful interference to Electromagnetic radiation can cause distur- radio or television reception, which can be deter- bances in other equipment, in installations (e.g. P mined by turning the equipment off and on, the user medical ones such as pacemakers or hearing aids) NL is encouraged to try to correct the interference by and in aircraft. It can also affect humans and animals. DK one or more of the following measures: • Reorient or relocate the receiving antenna. Precautions: S • Increase the separation between the equipment Athough this product conforms to the most stringent N and receiver. standards and regulations, Leica Geosystem cannot FIN • Connect the equipment into an outlet on a circuit totally exclude the possibility of harm to people and different from that to which the receiver is animals. J connected. • Do not use the product near petrol stations, CN • Consult the dealer or an experienced radio/TV chemical plants, in areas with a potentially explo- RC technician for help siveatmosphere and where blasting takes place. ROK  WARNING: Changes or modifications not expressly • Do not use the product near medical equiment. • Do not use the product in airplanes. PL • Do not use the product near your body for approved by Leica Geosystems for compliance could HR void the user’s authority to operate the equipment. extended periods. H  CAUTION: Never attempt to repair the product yourself. In RUS Product labelling: case of damage, contact the local dealership. CZ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: GR (1) This device may not cause harmful interference, and (2) this device must accept any interference LT received, including interference that may cause undesired operation. LV EST Position of the product label see last page! SLO SK M 4 Leica DISTO™ 743363b gb TR

D Precautions: GB Laser classification Do not look into the laser beam. Make sure the laser is aimed above or below eye level. (particularly with F Integrated distancemeter The Leica DISTO™ produces a visible laser beam fixed installations, in machines, etc.) I which emerges from the front of the instrument. Integrated positioning bracket sensor Leica E It is a Class 2 laser product in accordance with: DISTO™ A5 P • IEC60825-1 : 2001 "Radiation safety of laser The integrated positioning bracket sensor produces NL products" an invisible infrared beam, which does not leak from • EN60825-1 : 2001 "Radiation safety of laser the housing under general conditions. DK products" It is a Class 1 laser product in accordance with: S It is a Class II laser product in accordance with: • IEC60825-1 : 2001 "Radiation safety of laser N • FDA 21CFR Ch.I §1040 : 2004 (US Department of products" Health and Human Service, Code of Federal Regu- FIN • EN60825-1 : 2001 "Radiation safety of laser lations) products" J Laser Class 2/ II products: Class 1 / I laser products CN Do not stare into the laser beam or direct it towards Class 1 laser products are defined as safe in normal RC other people unnecessarily. Eye protection is operations under reasonably foreseeable conditions, normally afforded by aversion responses including ROK including direct viewing of the laser beam with optics the blink reflex. that could concentrate the laser output into the eye. PL  WARNING: Looking directly into the beam with optical aids HR H (e.g. binoculars, telescopes) can be hazardous. RUS Precautions: IR-LED IR-LED Laser class 11 Laserklasse nachIEC IEC60825-1:2001 60825-1:2001 CZ Do not look directly into the beam with optical aids. acc. GR  CAUTION: Looking into the laser beam may be hazardous LT to the eyes. LV EST SLO SK Leica DISTO™ 743363b gb 5 M TR

Labelling Laser Radiation Do not stare into the beam Laser class 2 acc. IEC 60825-1:2001 Maximum radiant power: <1mW Emitted wavelength: 620-690nm Beam divergence: 0.16 x 0.6 mrad Pulse duration: 1 x 10 -9 s Position of the product label see last page!


Document Created: 2006-08-15 15:36:09
Document Modified: 2006-08-15 15:36:09
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC