RFF-IIS01 User Man

FCC ID: RFF-IIS01

Users Manual

Download: PDF
FCCID_3986021

Leica BLK3D

Overview 2 Technical data 3 Instrument Set-up 7 Reality Capture 11 Laser 14 Sketch & Document 17 Organiser 21 Care 22 Warranty 23 Safety instructions 24 Leica BLK3D 1

Overview Ov e rv ie w Components Home screen The Leica BLK3D is a remote meas- urement tool with a class 2 laser. It enables to measure distances within a pic- ture at any time. See chapter Technical data for scope of use. 1. Measure 2. Touch screen 3. Back 4. Home 1. Status bar 5. Measure 2. Side menu 6. Recents 3. Reality Capture 7. Camera 4. Laser 8. USB port protection lid 5. Sketch & Document 9. USB port 6. New Project 10. ON/OFF 7. Organiser Leica BLK3D 2

Technical data Distance measurement (ISO 163331-1): T e c h n ic a ld a ta Accuracy with favourable conditions: * ± 1.0 mm / 0.04 in *** Accuracy with unfavourable conditions: ** ± 2.0 mm / 0.08 in *** Range with favourable conditions: * 250 m / 820 ft Range with unfavourable conditions: **** 120 m / 394 ft Smallest unit displayed: 0.1 mm / 1/32 in X-Range Power Technology™: yes Ø laser point at distances: 6 /30 / 60 mm (10 / 50 / 100 m) Tilt measurement: Measuring tolerance to laser beam: ***** ± 0.2° Measuring tolerance to housing: ***** ± 0.2° Range: 360° * applies for 100 % target reflectivity (white painted wall), low background illumination, 25 ºC ** applies for 10 to 100 % target reflectivity, high background illumination, - 10 ºC to + 50 ºC *** Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m, to 0.20 mm/m between 30 m to 100 m and to 0.30 mm/m for distances above 100 m **** applies for 100 % target reflectivity, background illumination of approximately 30'000 lux ***** after user calibration. Additional angle related deviation of +/- 0.01° per degree up to +/-45° in each quadrant. Leica BLK3D 3

Technical data P2P measurement with DST 360 (optional): Working range vertical sensor: -64° to > 90° Accuracy vertical sensor up to: +/- 0.1° Working range horizontal sensor: 360° Accuracy horizontal sensor up to: +/- 0.1° Tolerance P2P function at distances +/- 2 mm / 2 m (combination of sensors and distance measuring) approx.: +/- 5 mm / 5 m +/- 10 mm /10 m Levelling range: +/- 5° General: Dimensions (H x W x D): 180.6 x 77.6 x 27.1 mm (7.11 x 3.06 x 1.07 in) Weight (with rechargeable battery): 480 g / 17 oz Temperature range: Storage: -25 to 60 °C / -13 to 140 °F Operation: -10 to 50 °C / 14 to 122 °F Charging: 0 to 40 °C / 32 to 104 °F Tripod adapter: supports 1/4-20 UNC screw adapters Leica BLK3D 4

Technical data Technology: Operating system: Android 7 (Nougat) Processor (with integrated GPU): Snapdragon 820 QuadCore (2.2 GHz) RAM Memory: 4 GB Real-time processor: STM32F446 Screen: 5.0" IPS, HD 720x1280 LCD capacitive multi-touch screen, chemically strengthened, brightness: 450 cd/m2 Stereo camera: Pixels: 2 x 10 MP (15.8 cm diagonal base line) Field of view: 80° Focal length: 4.0 mm (22 mm in 35 mm equiv. in 1:1) Aperture: F3.0 DISTO™ camera: Pixels: 2 MP Field of view: 14° I/O: USB Type-C 1.0 for data transfer and charging (water-resistant), integrated speaker and microphone Keyboard: Three physical buttons (Power, DIST, Camera), four touch buttons (Back, Home, Recents, DIST) Additional sensors: Compass, 3D accelerometer and 3D gyroscope Laser class: 2 Laser type: 635 nm, < 1 mW Storage: Internal storage: 64 GB Single shots: 14000 pictures Multi shots: 5000 pictures Leica BLK3D 5

Technical data Communication: Bluetooth® Smart: Bluetooth v4.1 and v2.1 Radiated power: 1.78 mW (BLE) Radiated power: 10.00 mW (BT classic) Frequency: 2402-2480 MHz WLAN: Standard: 802.11 b/g/n Radiated power: 6.31 mW Frequency: 2412-2462 MHz GPS: A-GPS and GLONASS Power Management: Battery: Rechargeable battery pack Li-Ion (3.80 V, 3880 mAh, 14.7 Wh) (included) Power Management: AC adaptor (input: 100-240 V AC) (included) External charger (input: 100-240 V AC) (optional) Charge time: < 3.5 h (with AC adaptor) < 5 h (with optional external charger) Operating time: Typical capture*: 4 h / 220 multi-shot captures Continuous capture*: 2.5 h / 1000 single-shot captures Laser measurements: 6.5 h / 9500 laser measurements Auto power off: 3 h * Wi-Fi, Bluetooth® off, flash off, screen luminosity 50 % Leica BLK3D 6

Instrument Set-up In s tru me n tS e t-u p Charge Li-Ion battery by USB port Charge Li-Ion battery by USB char- Introduction Charging Li-Ion battery on the device ger (optional) The safety instructions (see Safety Charge batteries when battery icon Instructions) and the user manual in status bar is flashing and before should be read through carefully using it for the first time. While char- before the product is used for the ging, the device may heat up. This is first time. normal and should not affect the device’s lifespan or performance. If The person responsible for the the battery gets hotter than 40°C / product must ensure that all users 104°F, the charger stops. At a understand these directions and recommended storage temperature adhere to them. of -20°C to +30°C (-4°F to +86°F), batteries containing a 50% to 100% charge can be stored up to 1 year. The symbols used have the following After this storage period the bat- meanings: teries must be recharged. To save energy, unplug the charger when not WARNING in use. Indicates a potentially hazardous situation or an unintended use which, if not avoided, CAUTION will result in death or serious injury. Connecting the charger improperly may Use the provided USB-C cable to charge Remove battery cover (1) by opening the CAUTION cause serious damage to the device. Any the BLK3D. Open the lid (1) and plug the slider (2) from left to right. Remove battery damage caused by misuse is not covered cable into the port of the device (2). Plug (3) and place it into charger (4). Insert the by the warranty. Use only Leica-approved Indicates a potentially hazardous situation the end of the USB-C cable into one of the USB cable into the port (5). Plug the char- chargers, batteries, and cables. Unap- or an unintended use which, if not avoided, provided adaptors. Select the appropriate ger into an electrical socket. Charging is proved chargers or cables can cause the may result in minor injury and/or appre- one for your country. The device can also completed when indicator light (6) turns battery to explode or damage the device. ciable material, financial and envir- be charged connecting the USB-C cable to green. onmental damage. the computer, but this takes more time. If the device is connected to the computer Important paragraphs which must via USB cable, you can download and be adhered to in practice as they upload data. During charging, the device enable the product to be used in a cannot be used for measuring or acquiring technically correct and efficient man- images. ner. Leica BLK3D 7

Instrument Set-up Tap Switching ON/OFF Update Using the touch screen Tap on the display to open an application or to make a selection. It is recommended to use fingers on the touchscreen. Do not allow the touch screen to come into contact Drag with other electrical devices. Elec- Touch and hold object and drag it to the tar- trostatic discharges can cause the get position. touch screen to malfunction. Do not allow the touch screen to get in con- Double tap tact with water. The touch screen may malfunction in humid conditions Double tap on image to zoom it. Double tap or when exposed to water. To avoid again to return. damaging the touch screen, do not tap it with anything sharp or do not Spread and pinch apply excessive pressure to it with your fingertips. Spread two fingers apart on image to Connect the BLK3D to the internet via WiFi zoom. Pinch to zoom out. Switching ON to get the latest updates. Press ON/OFF button (1) to switch device Swipe ON. Swipe from left to right on the screen to scroll side Menu. Swipe downwards to Switching OFF scroll through options. Press ON/OFF button (1) for at least 2 seconds to switch device OFF. Leica BLK3D 8

Instrument Set-up Activation Copy your data from another device or set Connect to a WiFi network. Protect your device with a PIN or a pass- up as new. word (optional). Select language for operating system. Leica BLK3D 9

Instrument Set-up Settings Enter user data. Select measurement unit. Select language. Select “Settings” menu. Leica BLK3D 10

Reality Capture Re a lity Ca p tu re 1. Take photo Timer: set a time delay for the photo acquisition. Grid: show grid lines on display for better orientation. Flash: set the flash ON/OFF. Cancel: cancel last operation and go back to home screen. 1 Select "Reality Capture" function. 2 Choose between different settings: Menu: show menu for main nav- 3 Take a photo of the objects you want igation. to measure. New: Cancel and create new "Real- ity Capture" scene. 4 To increase measurement accuracy 5 Review photos. Press "Remove" to 6 Go to Measure mode (see 2. Measure take an additional photo from a slightly delete unwanted photos and "Keep" to distances in photo). other perspective. exit Review mode. Leica BLK3D 11

Reality Capture 2. Measure distances in photo 1 Select "Distance". Place fingers on the 2 Tap a point on photo to start measuring 3 Tap the second point. The measured 4 Tap on any measured point again to edges of the object you want to meas- process. distance is automatically shown above activate Precise mode. ure. Spread fingers apart to enlarge the the line. object. Snap: Automatic snap to edges in photo (activated by default). Delete: delete selected measuring point/line. Undo: erase last operation. 5 Drag and spread to precisely center 6 Select Tools to add Tags, Rename or 7 Select a line and measure the distance 8 Choose different options: the point you want to measure in the Delete scene, Move scene to a project with Laser. Laser measurement is hair cross. (see Organiser), measure distances shown in brackets (see Laser). New: exits Measure mode to take with Laser (see Laser). a new photo. Done: confirm measuring point pos- ition. Export: export the scene in JPG or PDF format. Next: jump the next measuring point for precise point selection. Leica BLK3D 12

Reality Capture 3. Measure areas in photo 1 Select "Area". Place fingers on the 2 Tap a point on photo to start measuring 3 Tap on next measuring points to com- 4 Drag and spread to precisely center edges of the object you want to meas- process. plete the area. Tap on any measured the point you want to measure in the ure. Spread fingers apart to enlarge the point again to activate Precise mode. hair cross. object. Snap: Automatic snap to edges in Define more points to complete the photo (activated by default). area. Tap on any point to activate Pre- Done: confirm measuring point pos- cise mode. ition. Delete: delete selected measuring point/line. Next: jump the next measuring point for precise point selection. Undo: erase last operation. 5 Select Tools to add Tags, Rename or 6 Select a line and measure the distance 7 Choose different options: Delete scene, Move scene to a project with Laser. Laser measurement is (see Organiser), measure distances shown in brackets (see Laser). New: exits Measure mode to take with Laser (see Laser). a new photo. Export: export the scene in JPG or PDF format. Leica BLK3D 13

Laser Laser Distance 1 Select "Laser" function. 2 Adjust measuring reference: 3 Select "Distance" from "Tools". Aim 4 Press "Measure" button (see laser at the target. Overview). Measured distance is Back: Distance is measured from the bot- shown at the bottom of the screen. tom of the device (default setting). Front: Distance is measured from the top of the device. Corner adaptor: Distance is measured from the corner adapter (optional). 5 Select "Tools" to choose between dif- 6 Select "Calc" and choose between 7 Swipe right to left to delete a single ferent measurements (Distance, "Add" and "Subtract". Take another measurement, or select "Clear" to can- Smart Horizontal, Area and Volume) Distance measurement to Add/Sub- cel the measurement list. and export measurement into a PDF tract to/from the previous one. report. Leica BLK3D 14

Laser Smart Horizontal 1 Select "Smart Horizontal" from "Tools". 2 Aim active laser at target. Measure 3 Vertical and horizontal distances are Adjust measure reference if needed. with "Measure" button. calculated. Tracking 1 Press or "Measure" button for 2 2 Press or "Measure" button again to fin- seconds to activate tracking mode. ish the measurement. Leica BLK3D 15

Laser Area 1 Select "Area" from "Tools". Adjust 2 Measure two distances (length and 3 Circumference and Area are auto- measure reference if needed. width) with "Measure" button. matically calculated. Volume 1 Select "Volue" from "Tools". Adjust 2 Measure three distances (length, width 3 Area, Wall Area, Circumference and measure reference if needed. and height) with "Measure" button. Volume are automatically calculated. Leica BLK3D 16

Sketch & Document Sk e tc h &Do c u me n t Sketch Plan (Advanced) 1 Select "Sketch Plan" function from 2 Select "Line" or "Area" and draw by 3 Select a line and press "Laser" to meas- 4 The sketch is automatically scaled. "Sketch & Document" menu. dragging or tapping. ure the length. Calculated values are in brackets. 5 Alternatively select a line and press 6 Select a line and press "Opening" to 7 Drag the opening to move it or select 8 Select opening and press "Modify" to “Enter” to add length. add doors or windows. the distance from the wall and meas- change type and enter width and ure it. height. Leica BLK3D 17

Sketch & Document 9 Switch to "3D" mode. A room height 10 Switch to "Document" and select an 11 Select a placeholder to review the 12 Select a placeholder to "Delete" or can be entered. empty placeholder to add Reality Cap- scenes. Press the scene preview to "Add" Reality Capture scenes. ture scenes. open it. Leica BLK3D 18

Sketch & Document Smart Room (Advanced) 1 Select "Smart Room" function from 2 Keep screen oriented away from the 3 Measure room clockwise/anti-clock- 4 Room Height can be measured any- "Sketch & Document" menu. wall while measuring. wise. Reverse measurements can be time. taken. 5 All measured values are displayed. 6 The floorplan can be modified in After the last measurement press "Fin- "Sketch" mode (see Sketch Plan). ish". Leica BLK3D 19

Sketch & Document Measure Plan (Advanced) 1 Connect BLK3D to Leica DST 360 2 Select “Measure Plan” function from 3 Measure lines, areas or points. Follow adapter. “Sketch & Document” menu. on-screen instructions. Measure Facade (Advanced) 1 Connect BLK3D to Leica DST 360 2 Select “Measure Facade” function 3 Measure lines, areas or points on a adapter. from “Sketch & Document” menu. facade. Follow on-screen instructions. Leica BLK3D 20

Organiser Org a n is e r 1 Select "Organiser" function. 2 All the sketches and scenes are stored 3 Open the category "All". All the plans, 4 Use the "Select" button to select an in four categories: Reality Capture scenes and projects item. Different actions are available: are stored. Export, Move to Project, Rename, Tag 1. All and Delete. 2. Projects 3. Scenes 4. Plans 5 Open the category "Projects". Press 6 Open the category "Scenes". All the 7 Open the category "Plans". All the 8 Press "S&D" button to add a new plan. the "Project" button to create a new Pro- Reality Capture scenes are stored. plans, including plans with scenes ject folder. Plans and scenes can be Press "RC" button to add a new scene. attached, are stored. moved in project folders. Leica BLK3D 21

Care Ca re l Clean the device with a damp, soft cloth. l Never immerse the device in water. l Never use aggressive cleaning agents or solvents. Leica BLK3D 22

Warranty Wa ra n ty International Limited Warranty The Leica BLK3D comes with a two year warranty from Leica Geosystems AG. To receive an additional year war- ranty, the product must be registered on our website at http://myworld.leica-geosystems.com within eight weeks of the purchase date. If the product is not registered, our two year warranty applies. More detailed information about the International Limited Warranty can be found on the internet at: www.leica-geo- systems.com/internationalwarranty. Leica BLK3D 23

Safety instructions Sa fe ty in s tru c tio n s The person responsible for the instrument must ensure that all users understand these directions Symbols used Permitted use and adhere to them. The product is permitted to The symbols used have the following meanings: l Capture interactive images use for skilled persons only. l Measure in interactive images WARNING l Measure distances Indicates a potentially hazardous situation or an unin- l Tilt measurement tended use which, if not avoided, will result in death or l Point to point measurement serious injury. l Data transfer with Bluetooth®/WLAN CAUTION l 2D/3D CAD export Indicates a potentially hazardous situation or an unin- tended use which, if not avoided, may result in minor injury and/or appreciable material, financial and envir- onmental damage. Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Leica BLK3D 24

Safety instructions Prohibited use Hazards in use Limits of use l Using the device for the first time without read- ing instructions WARNING Refer to section Technical data. The device is designed for use in areas permanently habitable by l Using the device outside the stated limits of humans. Do not use the product in explosion haz- Watch out for erroneous measurements if the instrument use (see section Limits of use) ardous areas or in aggressive environments. is defective or if it has been dropped or has been misused l Deactivating safety systems and removing or modified. Carry out periodic test measurements. Par- explanatory and hazard labels ticularly after the instrument has been subject to abnor- mal use, and before, during and after important l Opening of the equipment by using tools measurements. (screwdrivers, etc.) l Using not approved accessories from other manufacturers CAUTION l Deliberate dazzling of third parties; also in the Never attempt to repair the product yourself. In case of dark damage, contact a local dealer. l Using the device in surveying sites with inad- equate safeguards WARNING l Deliberate or irresponsible behaviour on scaf- folding, when using ladders, when measuring Changes or modifications not expressly approved could near machines which are running or near parts void the user´s authority to operate the equipment. of machines or installations which are unpro- tected CAUTION l Aiming directly in the sun Only use chargers recommended by the manufacturer to charge the batteries. Leica BLK3D 25

Safety instructions Areas of responsibility Disposal Electromagnetic Compatibility (EMC) Responsibilities of the manufacturer of the ori- CAUTION ginal equipment: Flat batteries must not be disposed of with household WARNING Leica Geosystems AG waste. Care for the environment and take them to the col- Heinrich-Wild-Strasse lection points provided in accordance with national or The device conforms to the most stringent requirements CH-9435 Heerbrugg local regulations. of the relevant standards and regulations. However, the Internet: www.leica-geosystems.com possibility of causing interference in other devices can- The product must not be disposed with household not be totally excluded. The company above is responsible for supplying the waste. Dispose of the product appropriately in product, including the User Manual in a completely safe accordance with the national regulations in force in condition. your country. Adhere to the national and country specific regulations. The company above is not responsible for third party accessories. Product specific treatment and waste management can be downloaded from our homepage. Responsibilities of the person in charge of the instrument: l To understand the safety instructions on the product and the instructions in the User Manual. l To be familiar with local safety regulations relat- ing to accident prevention. l Always prevent access to the product by unau- thorised personnel. Leica BLK3D 26

Safety instructions FCC statement (applicable in U.S.) ISED Statement (applicable in Japanese Radio Law and Japanese This equipment has been tested and found to comply Canada) Telecommunications Business Law with the limits for a Class B digital instrument, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful inter- This device complies with Industry Canada's license- Compliance exempt RSSs. Operation is subject to the following two ference in a residential installation. This equipment gen- conditions: This device is granted pursuant to the Japanese Radio erates, uses and can radiate radio frequency energy and, Law (電波法) and the Japanese Telecommunications if not installed and used in accordance with the instruc- l This device may not cause harmful inter- Business Law (電気通信事業法). tions, may cause harmful interference to radio com- ference, and munications. l this device must accept any interference, However, there is no guarantee that interference will not including interference that may cause occur in a particular installation. If this equipment does undesired operation of the device. cause harmful interference to radio or television recep- Le présent appareil est conforme aux CNR d’Industrie tion, which can be determined by turning the equipment Canada applicables aux appareils radio exempts de off and on, the user is encouraged to try to correct the licence. L’exploitation est autorisée aux deux conditions interference by one or more of the following measures: suivantes : l Reorient or relocate the receiving antenna l l’appareil ne doit pas produire de brouillage; l Increase the separation between the equip- l l’appareil doit accepter tout brouillage radi- ment and the receiver oélectrique subi, même si le brouillage est sus- l Connect the equipment into an outlet on a cir- ceptible d’en compromettre le fonctionnement. cuit different from that to which the receiver is connected Radio Frequency (RF) Exposure Compliance l Consult the dealer or an experienced radio/TV Statement technician for help The radiated rf output power of the instrument is below This device complies with part 15 of the FCC rules. Oper- the Health Canada's Safety Code 6 exclusion limit for ation is subjected to the following two conditions: portable devices (radiated element separation distance l This device may not cause harmful inter- between the radiating element and user and/or bystander ference, and is below 20 cm). l this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement The radiated rf output power of the instrument is below the FCC radio frequency exposure limits for portable devices according to KDB 447498. Leica BLK3D 27

Safety instructions Regulatory Use of the product with Bluetooth® Regulatory information, certification, and compliance marks are available on BLK3D. Go to Android Settings > WARNING About phone > Regulatory labels. Electromagnetic radiation can cause disturbances in other equipment, in installations (e.g. medical ones such as pacemakers or hearing aids) and in aircraft. It can also affect humans and animals. Precautions: Although this product conforms to the most stringent standards and regulations, the possibility of harm to people and animals cannot be totally excluded. l Do not use the product near petrol stations, chemical plants, in areas with a potentially explosive atmosphere and where blasting takes place. l Do not use the product near medical equip- ment. l Do not use the product in airplanes. l Do not use the product near your body for extended periods. Leica BLK3D 28

Safety instructions Laser classification Wavelength Labelling The device produces visible laser beams, which are emit- 655 nm ted from the instrument: It is a Class 2 laser product in accordance with: Maximum radiant output power for classification l IEC60825-1 : 2014 „Radiation safety of laser products“ 0.95 mW Pulse duration 400 ps Pulse repetition frequency 320 MHz Laser Class 2 products: Beam divergence Do not stare into the laser beam or direct it towards other people unnecessarily. Eye protection is normally afforded by aversion responses including the blink reflex. 0.16 x 0.6 mrad Subject to change (drawings, descriptions and technical WARNING data) without prior notice. Looking directly into the beam with optical aids (e.g. bin- oculars, telescopes) can be hazardous. CAUTION Looking into the laser beam may be hazardous to the eyes. Don't dazzle other individuals. Pay particular atten- tion to the direction of the laser beam when remotely oper- ating the product via an app or software. A measurement could be triggered at any time. Leica BLK3D 29


Document Created: 2018-08-30 09:03:19
Document Modified: 2018-08-30 09:03:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC