MPE colocation

FCC ID: RFD-RX-T

RF Exposure Info

Download: PDF
FCCID_710690

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH RF Exposure Calculation Applicant: Leica Geosystems AG FCC ID: RFD-RX-T This final mobile device is a composite device with the modular transmitter (FCC ID: RFD-PANMOD1) and the modular transmitter (FCC ID: HSW-2410G). The equipment full fills the technical standards and rules of the rule part under which it operates. Additional measurements of the final device enable the co-location of the both modular approved transmitter for the application in a "RX1250T" (FCC ID: RFD-RX-T). integral Antenna requirement § 15.203). An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. The Following calculation is the reference data for 20cm distance. ___________________________________________________________________________________ ETS Handelsregister: Bankverbindung: Electronic Technology Systems Dr. Genz GmbH Amtsgericht Frankfurt/Oder HRB 5151 Sparkasse Oder-Spree Storkower Strasse 38c Geschäftsführung: Dr. Dietmar Genz BLZ 170 550 50 D-15526 Reichenwalde b. Berlin Norbert Kaspar Kto. Nr. 3105165974


Document Created: 2006-09-29 14:02:36
Document Modified: 2006-09-29 14:02:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC