RF Exposure

FCC ID: RD7-SENSOR4X

RF Exposure Info

Download: PDF
FCCID_3241791

Company: NetScout Systems Inc. Test of: SENSOR4 Product Family To: FCC CFR 47 Part 15 Subpart E 15.407 Report No.: NTCT77-U4 MPE Rev A MPE REPORT

MPE TEST REPORT FROM Test of: NetScout Systems Inc. SENSOR4 Product Family to To: FCC CFR 47 Part 15 Subpart E 15.407 Test Report Serial No.: NTCT77-U4 MPE Rev A This report supersedes: None Applicant: NetScout Systems Inc. 178 E. Tasman Drive San Jose, CA. 95134 USA Product Function: Wireless LAN Client Issue Date: 15th November 2016 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory

1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm 2) = EIRP/(4*π*d2) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) Because the EUT belongs to the General Population/Uncontrolled Exposure the limit of power density is 1.0 mW/cm2 The calculations in the table below use the highest conducted power values together with the lowest antenna gain specified for the EUT. These calculations represent worst case in terms of the exposure levels. Peak Calculated Ant Numeric Minimum Output Peak Output Power Density Freq. Band (MHz) Gain Gain 2 Separation Power Power (mW) (mW/cm ) @ (dBi) (numeric) Distance (cm) (dBm) 20cm 2400.0 - 2483.5 2 1.58 24.14 259.66 0.08 20.00 5150 – 5250 4.8 3.02 16.92 49.2 0.03 20.00 5250 – 5350 4.8 3.02 23.14 206.1 0.12 20.00 5470 - 5725 4.8 3.02 22.72 187.1 0.11 20.00 5725 - 5850 4.8 3.02 22.37 172.6 0.12 20.00 Assessment for simultaneous operation: Peak Calculated Ant Numeric Minimum Output Peak Output Power Density Freq. Band (MHz) Gain Gain Separation Power Power (mW) (mW/cm2) @ (dBi) (numeric) Distance (cm) (dBm) 20cm 5250 – 5350 4.8 3.02 23.14 206.1 0.12 20.00 2400.0 - 2483.5 2 1.58 3.02 259.66 0.08 20.00 EIRP TOTAL (mW/EIRP) : 625.47 0.2 20.00 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification Maximum Permissible Exposure Limits FCC §1.1310 Limit = 1mW / cm2 from 1.310 Table 1

575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com


Document Created: 2017-12-20 03:38:09
Document Modified: 2017-12-20 03:38:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC