Test Report 2

FCC ID: RAXWN7512A

Test Report

Download: PDF
FCCID_857759

802.11g OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL 6dB BANDWIDTH MINIMUM LIMIT CHANNEL FREQUENCY PASS / FAIL (MHz) (MHz) (MHz) 1 2412 16.65 0.5 PASS 6 2437 16.60 0.5 PASS 11 2462 16.60 0.5 PASS CH1 Report No.: RF960829H03B 61 Report Format Version 2.0.6 Reference No.: 960917H01

CH6 CH11 Report No.: RF960829H03B 62 Report Format Version 2.0.6 Reference No.: 960917H01

DRAFT 802.11n (20MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6.5Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL 6dB BANDWIDTH MINIMUM LIMIT CHANNEL FREQUENCY PASS / FAIL (MHz) (MHz) (MHz) 1 2412 17.75 0.5 PASS 6 2437 17.75 0.5 PASS 11 2462 17.75 0.5 PASS CH1 Report No.: RF960829H03B 63 Report Format Version 2.0.6 Reference No.: 960917H01

CH6 CH11 Report No.: RF960829H03B 64 Report Format Version 2.0.6 Reference No.: 960917H01

DRAFT 802.11n (40MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 13.5Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL 6dB BANDWIDTH MINIMUM LIMIT CHANNEL FREQUENCY PASS / FAIL (MHz) (MHz) (MHz) 1 2422 36.5 0.5 PASS 4 2437 36.6 0.5 PASS 7 2452 36.5 0.5 PASS CH1 Report No.: RF960829H03B 65 Report Format Version 2.0.6 Reference No.: 960917H01

CH4 CH7 Report No.: RF960829H03B 66 Report Format Version 2.0.6 Reference No.: 960917H01

4.4 MAXIMUM PEAK OUTPUT POWER 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT The Maximum Peak Output Power Measurement is 30dBm. 4.4.2 INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSP40 100036 Nov. 23, 2007 Agilent SIGNAL GENERATOR E8257C MY43320668 Dec. 28, 2007 TEKTRONIX OSCILLOSCOPE TDS380 B016335 July 15, 2008 NARDA DETECTOR 4503A FSCM99899 NA NOTE: The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.4.3 TEST PROCEDURES 1. A detector was used on the output port of the EUT. An oscilloscope was used to read the response of the detector. 2. Replaced the EUT by the signal generator. The center frequency of the S.G was adjusted to the center frequency of the measured channel. 3. Adjusted the power to have the same reading on oscilloscope. Record the power level. 4.4.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF960829H03B 67 Report Format Version 2.0.6 Reference No.: 960917H01

4.4.5 TEST SETUP EUT or S.G DETECTOR OSCILLOSCOPE 4.4.6 EUT OPERATING CONDITIONS Same as Item 4.3.6 Report No.: RF960829H03B 68 Report Format Version 2.0.6 Reference No.: 960917H01

4.4.7 TEST RESULTS 802.11b DSSS MODULATION: MODULATION TYPE CCK TRANSFER RATE 11Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL PEAK POWER PEAK POWER PEAK POWER CHANNEL FREQUENCY PASS / FAIL OUTPUT (mW) OUTPUT (dBm) LIMIT (dBm) (MHz) 1 2412 57.544 17.60 30 PASS 6 2437 54.954 17.40 30 PASS 11 2462 58.884 17.70 30 PASS 802.11g OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL PEAK POWER PEAK POWER PEAK POWER CHANNEL FREQUENCY PASS / FAIL OUTPUT (mW) OUTPUT (dBm) LIMIT (dBm) (MHz) 1 2412 50.119 17.00 30 PASS 6 2437 56.234 17.50 30 PASS 11 2462 52.481 17.20 30 PASS Report No.: RF960829H03B 69 Report Format Version 2.0.6 Reference No.: 960917H01

DRAFT 802.11n (20MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6.5Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL PEAK POWER PEAK POWER PEAK POWER CHANNEL FREQUENCY PASS / FAIL OUTPUT (mW) OUTPUT (dBm) LIMIT (dBm) (MHz) 1 2412 57.544 17.60 30 PASS 6 2437 51.286 17.10 30 PASS 11 2462 51.286 17.10 30 PASS DRAFT 802.11n (40MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 13.5Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL PEAK POWER PEAK POWER PEAK POWER CHANNEL FREQUENCY PASS / FAIL OUTPUT (mW) OUTPUT (dBm) LIMIT (dBm) (MHz) 1 2412 41.687 16.20 30 PASS 6 2437 51.286 17.10 30 PASS 11 2462 52.481 17.20 30 PASS Report No.: RF960829H03B 70 Report Format Version 2.0.6 Reference No.: 960917H01

4.5 POWER SPECTRAL DENSITY MEASUREMENT 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 4.5.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSP40 100036 Nov. 23, 2007 NOTE: 1.The measurement uncertainty is less than +/- 2.6dB, which is calculated as per the NAMAS document NIS81. 2.The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.5.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer through an attenuator, the bandwidth of the fundamental frequency was measured with the spectrum analyzer using 3kHz RBW and 30kHz VBW, set sweep time = span/3kHz. The power spectral density was measured and recorded. The sweep time is allowed to be longer than span/3kHz for a full response of the mixer in the spectrum analyzer. 4.5.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF960829H03B 71 Report Format Version 2.0.6 Reference No.: 960917H01

4.5.5 TEST SETUP SPECTRUM EUT ANALYZER 4.5.6 EUT OPERATING CONDITION Same as Item 4.3.6 Report No.: RF960829H03B 72 Report Format Version 2.0.6 Reference No.: 960917H01

4.5.7 TEST RESULTS 802.11b DSSS MODULATION: MODULATION TYPE CCK TRANSFER RATE 11Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL RF POWER LEVEL IN MAXIMUM LIMIT CHANNEL FREQUENCY PASS / FAIL 3kHz BW (dBm) (dBm) (MHz ) 1 2412 -7.91 8 PASS 6 2437 -7.29 8 PASS 11 2462 -6.99 8 PASS CH1 Report No.: RF960829H03B 73 Report Format Version 2.0.6 Reference No.: 960917H01

CH6 CH11 Report No.: RF960829H03B 74 Report Format Version 2.0.6 Reference No.: 960917H01

802.11g OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL RF POWER LEVEL IN MAXIMUM LIMIT CHANNEL FREQUENCY PASS / FAIL 3kHz BW (dBm) (dBm) (MHz ) 1 2412 -13.17 8 PASS 6 2437 -10.98 8 PASS 11 2462 -12.47 8 PASS CH1 Report No.: RF960829H03B 75 Report Format Version 2.0.6 Reference No.: 960917H01

CH6 CH11 Report No.: RF960829H03B 76 Report Format Version 2.0.6 Reference No.: 960917H01

DRAFT 802.11n (20MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 6.5Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL RF POWER LEVEL IN MAXIMUM LIMIT CHANNEL FREQUENCY PASS / FAIL 3kHz BW (dBm) (dBm) (MHz ) 1 2412 -14.79 8 PASS 6 2437 -13.73 8 PASS 11 2462 -14.00 8 PASS CH1 Report No.: RF960829H03B 77 Report Format Version 2.0.6 Reference No.: 960917H01

CH6 CH11 Report No.: RF960829H03B 78 Report Format Version 2.0.6 Reference No.: 960917H01

DRAFT 802.11n (40MHz) OFDM MODULATION: MODULATION TYPE BPSK TRANSFER RATE 13.5Mbps INPUT POWER ENVIRONMENTAL 28deg.C, 62%RH, 120Vac, 60 Hz (SYSTEM) CONDITIONS 960hPa TESTED BY Tony Chen CHANNEL RF POWER LEVEL IN MAXIMUM LIMIT CHANNEL FREQUENCY PASS / FAIL 3kHz BW (dBm) (dBm) (MHz ) 1 2412 -17.53 8 PASS 6 2437 -16.58 8 PASS 11 2462 -16.59 8 PASS CH1 Report No.: RF960829H03B 79 Report Format Version 2.0.6 Reference No.: 960917H01

CH4 CH7 Report No.: RF960829H03B 80 Report Format Version 2.0.6 Reference No.: 960917H01

4.6 CONDUCTED EMISSION AND BAND EDGES MEASUREMENT 4.6.1 LIMITS OF CONDTCTED EMISSION AND BAND EDGES MEASUREMENT Below –20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 TEST INSTRUMENTS Description & Manufacturer Model No. Serial No. Calibrated Until R&S SPECTRUM ANALYZER FSP40 100036 Nov. 23, 2007 NOTE: 1.The measurement uncertainty is less than +/- 2.6dB, which is calculated as per the NAMAS document NIS81. 2.The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 4.6.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer via a low lose cable. Set both RBW and VBW of spectrum analyzer to 100kHz with suitable frequency span including 100 MHz bandwidth from band edge. The band edges was measured and recorded. The spectrum plots (RBW = VBW = 100kHz) are attached on the following pages. Report No.: RF960829H03B 81 Report Format Version 2.0.6 Reference No.: 960917H01

4.6.4 DEVIATION FROM TEST STANDARD No deviation 4.6.5 EUT OPERATING CONDITION Same as Item 4.3.6 4.6.6 TEST RESULTS The spectrum plots are attached on the following 8 images. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement in part 15.247(d). Report No.: RF960829H03B 82 Report Format Version 2.0.6 Reference No.: 960917H01

802.11b DSSS MODULATION: CH1 CH11 Report No.: RF960829H03B 83 Report Format Version 2.0.6 Reference No.: 960917H01

CH1 CH11 Report No.: RF960829H03B 84 Report Format Version 2.0.6 Reference No.: 960917H01

802.11g OFDM MODULATION: CH 1 CH11 Report No.: RF960829H03B 85 Report Format Version 2.0.6 Reference No.: 960917H01

CH1 CH11 Report No.: RF960829H03B 86 Report Format Version 2.0.6 Reference No.: 960917H01

DRAFT 802.11n (20MHz) OFDM MODULATION: CH1 CH11 Report No.: RF960829H03B 87 Report Format Version 2.0.6 Reference No.: 960917H01

CH1 CH11 Report No.: RF960829H03B 88 Report Format Version 2.0.6 Reference No.: 960917H01

DRAFT 802.11n (40MHz) OFDM MODULATION: CH1 CH7 Report No.: RF960829H03B 89 Report Format Version 2.0.6 Reference No.: 960917H01

CH1 CH7 Report No.: RF960829H03B 90 Report Format Version 2.0.6 Reference No.: 960917H01

4.7 ANTENNA REQUIREMENT 4.7.1 STANDARD APPLICABLE For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.247 (b), if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. 4.7.2 ANTENNA CONNECTED CONSTRUCTION The antennas used in this product are as below. No. Antenna Type Gain (dBi) Antenna Connector 1 PCB 2.03 NA 2 PCB 2.03 NA Report No.: RF960829H03B 91 Report Format Version 2.0.6 Reference No.: 960917H01

5. INFORMATION ON THE TESTING LABORATORIES We, ADT Corp., were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025. USA FCC, UL, A2LA Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA , CSA R.O.C. TAF, BSMI, NCC Netherlands Telefication Singapore GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: RF960829H03B 92 Report Format Version 2.0.6 Reference No.: 960917H01

6. APPENDIX-A MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. Report No.: RF960829H03B 93 Report Format Version 2.0.6 Reference No.: 960917H01


Document Created: 2007-10-16 20:56:45
Document Modified: 2007-10-16 20:56:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC