RF Exposure Calculation

FCC ID: RAXWN4401AARC

RF Exposure Info

Download: PDF
FCCID_355141

FCC ID: RAXWN4401AARC




                       RF EXPOSURE REPORT

                              REPORT NO.: RF920804H01
                               MODEL NO.: WN4401A


                              ACCORDING: FCC Guidelines for Human Exposure
                                         IEEE C95.1


                     APPLICANT: Arcadyan Technology Corporation

                      ADDRESS: 4F, No. 9, Park Avenue II, Science-based Industrial
                               Park, Hsinchu 300, Taiwan, R.O.C.




                      ISSUED BY: Advance Data Technology Corporation

              LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen,
                            Chiung Lin Hsiang, Hsin Chu Hsien,
                            Taiwan, R.O.C.




                                                                Lab Code: 200376-0




ADT No.: 920804H01


FCC ID: RAXWN4401AARC




                        RF Exposure Measurement
1. Introduction

In this document, we try to prove the safety of radiation harmfulness to the human body
for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC
1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully
Anechoic Chamber (FAC) calibrated for antenna measurement in ADT, and also the
maximum total power input to the antenna is measured. Through the Friis transmission
formula and the maximum gain of the antenna, we can calculate the distance, away from
the product, where the limit of MPE is reached.
Although the Friis transmission formula is a far field assumption, the calculated result of
that is an over-prediction for near field power density. We will take that as the worst case
to specify the safety range.


2. RF Exposure Limit

According to FCC 1.1310: The criteria listed in the following table shall be used to
evaluate the environmental impact of human exposure to radio-frequency (RF) radiation
as specified in 1.1307(b)

LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)

   Frequency          Electric Field   Magnetic Field   Power Density      Average Time
     Range           Strength (V/m)    Strength (A/m)     (mW/cm2)           (minutes)
     (MHz)
                     (A)Limits For Occupational / Control Exposures
   300-1500                …               …              F/300                  6
 1500-100,000              …                …                  5                 6
           (B)Limits For General Population / Uncontrolled Exposure
   300-1500           …               …             F/1500                       6
 1500-100,000              …                …                 1.0                30
F = Frequency in MHz




ADT No.: 920804H01


FCC ID: RAXWN4401AARC




3. Friis Formula


Friis transmission formula : Pd = (Pout*G) / (4*pi*r2)


where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
R = distance between observation point and center of the radiator in cm


Pd is the limit of MPE, 1 mW/cm2. If we know the maximum Gain of the antenna and the
total power input to the antenna, through the calculation, we will know the MPE value at
distance 20cm.

Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition,
     Page 640, Eq. (11-133).



4 EUT Operating condition
The software provided by Manufacturer enabled the EUT to transmit and receive data at
lowest, middle and highest channel individually.




5. Classification
The antenna of this product, under normal use condition, is at least 20cm away from the
body of the user. Warning statement to the user for keeping at least 20cm or more
separation distance with the antenna should be included in users manual. So, this
device is classified as Mobile Device




ADT No.: 920804H01


FCC ID: RAXWN4401AARC




6 Test Results

6.1 Antenna Gain
Antenna 1:
The maximum Gain measured in Fully Anechoic Chamber is -1.43Bi or 1.39 (numeric).
Antenna 2:
The maximum Gain measured in Fully Anechoic Chamber is -1.8Bi or 1.514 (numeric).

6.2 Output Power Into Antenna & RF Exposure value at distance 20cm:

Antenna 1: (For DSSS)
                 Channel                                            Limit of
                              Output Power to   Power Density
  Channel       Frequency                                        Power Density
                               Antenna (mW)       (mW/cm2)
                  (MHz)                                            (mW/cm2)
      1            2412            63.24            0.017             1.0
      6            2437            67.45            0.019             1.0
     11            2462            73.96            0.021             1.0

Antenna 1: (For OFDM)
                 Channel                                            Limit of
                              Output Power to   Power Density
   Channel      Frequency                                        Power Density
                               Antenna (mW)       (mW/cm2)
                  (MHz)                                            (mW/cm2)
      1            2412            31.70            0.009             1.0
      6            2437            33.42            0.009             1.0
     11            2462            34.59            0.010             1.0




ADT No.: 920804H01


FCC ID: RAXWN4401AARC




Antenna 2: (For DSSS)
                 Channel                                         Limit of
                            Output Power to   Power Density
  Channel       Frequency                                     Power Density
                             Antenna (mW)       (mW/cm2)
                  (MHz)                                         (mW/cm2)
      1            2412         63.24            0.019             1.0
      6            2437         67.45            0.020             1.0
     11            2462         73.96            0.022             1.0

Antenna 2: (For OFDM)
                 Channel                                         Limit of
                            Output Power to   Power Density
   Channel      Frequency                                     Power Density
                             Antenna (mW)       (mW/cm2)
                  (MHz)                                         (mW/cm2)
      1            2412         31.69            0.010             1.0
      6            2437         33.42            0.010             1.0
     11            2462         34.59            0.010             1.0




ADT No.: 920804H01



Document Created: 2003-09-09 16:36:50
Document Modified: 2003-09-09 16:36:50

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC