User manual

FCC ID: RA8-BC009

Users Manual

Download: PDF
FCCID_1238611

(1) (5) 8. Connection/Link between Speakerphone and Mobile Phone (5) Reject the Second Call during a Call (3 way call or two link function) After pairing is completed, speakerphone is always under standby mode. When receiving a second call, press and hold the "MFB" button for 3 Before you place or answer a call, if the headset icon is not shown on seconds to reject the second mobile phone call. Multipoint Speakerphone (2) BC333M phone screen, please follow the steps below to activate the Bluetooth (6) Switch between 2 Phone Calls (3 way call or two link function) connection/link through your mobile phone or speakerphone until the a. When having 2 calls on the line, press "MFB" button twice to switch (1) (5) (3) headset icon is on the screen. between these 2 phone calls. Multipoint Speakerphone (3) (4) (7) (8) (6) (1) On phone: Select the “BT Speaker” from the paired list on your phone b. When having 2 calls on the line, short press the "MFB" button once (2) screen. to end the current call and stay with the other call. BC323M (1) (5) (2) On speakerphone: Short press “MFB” and select “Accept” on phone NOTES: When the multipoint feature using, the device can not support screen to accept connection. three-way calling feature. (4) (6) (7) (8) MULTIPOINT BC353M Multipoint Speakerphone (2) 9. Disconnection between Speakerphone and Mobile Phone When you need to connect your speakerphone with another Bluetooth- 12. Low Voltage Protection of Battery When the voltage of battery decreased to 3.3V, the red LED will flash in enabled mobile phone, please follow the steps below to disconnect the every 3 seconds, and the speakerphone will be power off automatically SPEAKERPHONE (3) (4) (7) (8) (6) speakerphone with the pre-paired mobile phone. (1) Power off the speakerphone. when the voltage under 3.0V. (2) Select “Disconnecting” on the Bluetooth device list of your mobile 13. Restore to Default Setting (1) (5) (1) (5) phone to remove the connection. Please follow the steps below to reset the speakerphone to its original Note: When losing the connection/link, the speakerphone will be setting and remove all the previous pairing and connection. Multipoint Speakerphone (2) (2) automatically power off in 15 minutes. The blue LED will flash twice in every 3 (1) Ensure the speakerphone is under standby mode. BC353BM BC373BM seconds when the speakerphone is not connected with mobile phone. (2) Press and hold both of “V+” and “V-” buttons for 10 seconds until the blue and red LED flash 5 times, then the speakerphone will resume (3) (4) (8) (7) (6) (3) (4) (8) (7) (6) 10. Using the Speakerphone standby mode. The speakerphone is now back to original setting, and (1) Answering a Call after power on the speakerphone again, it will enter pairing mode When receiving a phone call, short press the “MFB” button to answer automatically. (1) (7) (5) (2) the call. NOTES: If the speakerphone is connected with a mobile phone before (1) (5) User Manual Multipoint Speakerphone (2) Multipoint Speakerphone (2) Ending a Call Short press the “MFB” button to end a call. restore to default setting, it will enter pairing mode automatically after restored to default. If the speakerphone is not connected with the mobile BC373M BC933M (3) Reject a Call phone before restore to default setting, it will be under standby mode after When you hear the ringing tone, press and hold the “MFB” button for 2 restored to default setting. seconds to reject the call. (3) (4) (7) (8) (6) (4) Voice Dial 14. LED Indication (3) (4) (6) (8) If your mobile phone is voice dialing enabled, under standby mode, short press the “MFB” button and say the voice tag after you hear a Speakerphone Status LED Indication beep. Power Off Mode Off using the speakerphone, it is recommended to charge the battery fully for Note: Please make sure to record voice tag into the mobile phone before the first time. Normal full charge time is 3 hrs. (approx.) using voice dial function. Functionality varies depending on the mobile Power On Blue LED flash 3 seconds IMPORTANT: phone models. Please refer to your mobile phone user guide for details. Power Off Red LED flash 3 seconds (1) Charging indication will be delayed for a few minutes if the speakerphone (5) Last Number Re-Dialing has not been used for a long time or the battery is drained. Under standby mode, short press the “MFB” button twice for last Standby Mode Blue LED flash once every 3 seconds (2) To prolong durability of battery, it’s recommended to charge the number redials. Standby (Disconnect Blue LED flash twice every 3 seconds Speakerphone Bluetooth Status device) LED Indication Power Off Mode Standby-Low Voltage Off 2 4 Red LED6 flash once every 3 seconds Power Talk in On progress Blue LED flash 3 seconds Blue LED flash once every 6 seconds Power Off Pairing in progress Red LED flash 3 seconds The red and blue LED flash on alternatively Standby Mode Chargubg in progress Blue LED flash once every 3 seconds Red LED steady on 1. About Bluetooth Speakerphone speakerphone whenever low battery is encountered. When battery (6) Adjusting the Volume Standby (Disconnect Charging completed Blue LED flash twice every 3 seconds This versatile Bluetooth speakerphone is specially designed for user to becomes low, LED will flash red every 3 seconds. Under low battery During a call, press the “V+” or “V-” buttons repeatedly until you reach Off Bluetooth device) enjoy convenience and freedom of wireless communication. Dual capacity of condition, if speakerphone is continuously used, it’ll decrease the desired volume level. use on desk-top like a Conference Speakerphone and in-car like a Hands- durability of battery as well as standby time and cause longer charge (7) Mute & Un-Mute Standby-Low Voltage Red LED flash once every 3 seconds free car kit. Advanced built-in microphone with D.S.P. solution for Echo time than normal 3 hrs. a: Mute: During a call, short press the “MUTE” button to mute the Talk in progress Blue LED flash once every 6 seconds Cancellation & Noise Suppression that gives you impeccable full duplex (3) The red LED will flash on while charging and flash off when charging is speakerphone. The red LED will flash on during mute mode. sound quality. completed. b: Un-Mute: Short press the “MUTE” button during mute mode to un- Pairing in progress The red and blue LED flash on alternatively mute the speakerphone. Chargubg in progress Red LED steady on 2. About Bluetooth Technology 6. Turning ON/OFF the Speakerphone (8) Transferring Calls Power On: When speakerphone is under off mode, press and hold the a: Speakerphone to Mobile Phone: During a call, press both of “V+” Charging completed Off Bluetooth wireless technology is set to revolutionize the personal connectivity by providing freedom from wired connections-enabling links “MFB” for 4 seconds until you hear a short beep. The blue LED will flash 5 and “V-” buttons, and the call is routed to your mobile phone. and connectivity between notebook/laptop, mobile phones, portable times, and then the speakerphone will automatically connect to the last b: Mobile Phone to Speakerphone: Press both of “V+” and “V-” handheld devices and other Bluetooth enabled devices within 10 meters. connected mobile phone. buttons to route the call to speakerphone. 15. Product Specification Utilizing global sound & digital data 2.4GHz ISM transmission, it makes Power Off: Speakerphone is under standby mode, press and hold the Bluetooth Compliance: Bluetooth V2.1+EDR “MFB” button for 4 seconds until you hear a short beep. The red LED will 11. MultiPoint Feature Operating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM band global communication in the way you’ve never dreamed of! flash 5 times before power off. (1) Activate Multipoint Connection Output Power: Class 2, up to 10 meters The default setting of the speakerphone's multipoint function is OFF. Support Profiles: HSP and HFP Profiles 3. Getting to Know Your Bluetooth Speakerphone 7. Pairing You can activate the multipoint function for connecting with 2 mobile Support Multiple Paired Device: Memorize paired data of 8 Bluetooth phones To use your Bluetooth speakerphone, please follow these simple steps: phones at the same time. Stand-by Time: Up to 1600 hours/ 66 days Prior to using the speakerphone for the first time, you must pair it with a (1) Charge your speakerphone. Prior to using the speakerphone, it is a. Multipoint ON: Under standby mode, press and hold "V+" button for Talk Time: Up to 12-14 hours Bluetooth-enabled mobile phone. The steps below describe pairing recommended to charge the battery fully for the first time. Normal full 3 seconds until you hear a beep. Battery Charging Time: About 3 hours instructions for a typical Bluetooth-enabled mobile phone. charge time is 3 hrs. (approx.) (1) Place the speakerphone and mobile phone no more than 1 meter apart. b. Multipoint OFF: Under standby mode, press and hold "V-" button Charger Voltage: DC5.0V, 400mA (2) Place your speakerphone and a Bluetooth-enabled mobile phone (2) Ensure the speakerphone is under OFF mode. for 3 seconds until you hear a beep. The speakerphone will turn off Battery: 650mA, BL-5B (Rechargeable Lithium-Ion Battery) within 1 meter for pairing. (3) Press and hold the “MFB” button for 6 seconds until the LED flash red the multipoint function and power off automatically. When power on (3) Ensure your speakerphone and mobile phone is placed within 10 and blue alternatively, it is now ready for pairing. the speakerphone again, it will only connect to the last connected meters Bluetooth sensing distance. (Obstruction could cause shorter (4) Activate the Bluetooth function on your mobile phone and search fro Bluetooth device. Changes or modifications not expressly approved by the party responsible sensing distance.) accessible Bluetooth device by referring to your mobile phone user (2) Multipoint Pairing for compliance could void the user's authority to operate the equipment. guide for details. a. First mobile phone: Pair the speakerphone with one of the 4. Appearance and Function (5) Select “BT Speaker” from the list. Bluetooth-enabled mobile phones. This device complies with Part 15 of the FCC Rules. Operation is subject to (1) Speaker (6) Enter the pre-programmed code “0000” and press “OK” to pair the b. Second mobile phone: Power OFF the speakerphone. Press and the following two conditions: (1) this device may not cause harmful (2) Microphone speakerphone and the phone. When pairing is completed, the blue hold the "MFB" button for 5 seconds to enter pairing mode again to interference, and (2) this device must accept any interference received, (3) LED and red LED stop flashing, the speakerphone is under the standby pair and connect with the second mobile phone. including interference that may cause undesired operation. (4) Charging Socket (5-pin USB) mode with the blue LED flashes in every 3 seconds. c. Connect with the first paired mobile phone to the speakerphone. (5) Mute Button (7) Press “Return” to go back to your mobile phone’s main menu. Please (3) Multipoint Connection/Link with 2 Mobile Phones This equipment complies with FCC radiation exposure limits set forth for an (6) MFB Button (Multi-Function Button) place the mobile phone and the speakerphone within 10 meters After the multipoint function is activated, please follow the steps below uncontrolled environment. End user must follow the specific operating (7) Volume Increase (V+) sensing distance. You should now be able to make and receive calls to connect with 2 Bluetooth enabled mobile phones at the same time. instructions for satisfying RF exposure compliance. This transmitter must (8) Volume Decrease (V-) using your speakerphone. When power on the speakerphone, it will automatically search and not be co-located or operating in conjunction with any other antenna or Note: If the pairing cannot be completed within 2 minutes after the pairing connect the last 2 mobile phones that have been connected before. transmitter. mode is activated, the speakerphone will power off automatically. Please (4) Answer the Second Call during a Call (3 way call or two link function) 5. Charging Your Bluetooth Speakerphone repeat steps above to pair the speakerphone and mobile phone again. When receiving a second call, press "MFB" button twice to hold the The Bluetooth speakerphone comes with a rechargeable battery. Prior to first call on line and answer the second call. 1 3 5 7


Document Created: 2009-11-23 08:33:59
Document Modified: 2009-11-23 08:33:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC