Test Report

FCC ID: R9C-X9006

Test Report

Download: PDF
FCCID_2238497

ORLAB!® <gyep Report No.:SZ13120125E01 FCC TEST REP Issued to GUANGDONG OPPO MOBILE TELECOMMUNICATIONS CORP., LTD. For Mobile Phone Model Name: OPPO X9006 Trade Name: OPPO Brand Name: OPPO FCC ID: R3C—X9006 Standard: 47 CFR Part 15 Subpart B Test date: December 20, 2013 — January 10, 2014 Issue date: January 21, 2014 By Shenzhen Morlab Communications Technology Co., Ltd. FL.3, Building A, FeiYang Science .._.-...;...,. Road,Block 67, BaoAn District, inneeninele h Tested by Xi i Add Review by Wiu »homg [,. Xiao Xiong Wu Zhangli (Test Engineer) (EMC Manager) Date 7pilp . | . 4| Date 2el4 . [;,’ The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the Shanzhen MORLAB Communication Technology Co., Ltd. it may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it or a certified copy there of prepared by the Shenzhen MORLAB Telecommunication Co., Ltd to his customer. Supplier or others persons directly concerned. Shenzhen MORLAB Telecommunication Co., Ltd will not, without the consent of the client enter into any discussion of correspondence with any third party conceming the contents of the report. In the eventofthe improper use of the report, Shenzhen MORLAB Telecommunication Co., Ltd reserves the rights to withdraw it and to adopt any other remedies which may be appropriate Shenzhen Morlab Communications Technology Co., Ltd. Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525

Report No.: SZ13120125E01 TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................... 3 1.1 EUT DESCRIPTION.................................................................................................................................... 3 1.2 TEST STANDARDS AND RESULTS .............................................................................................................. 5 1.3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 1.3.1 FACILITIES ........................................................................................................................................................6 1.3.2 FACILITIES ........................................................................................................................................................6 1.3.3 MEASUREMENT UNCERTAINTY ....................................................................................................................... 6 2. TEST CONDITIONS SETTING ................................................................................................................ 7 2.1 TEST MODE .............................................................................................................................................. 7 2.2 TEST SETUP AND EQUIPMENTS LIST ......................................................................................................... 8 2.2.1 CONDUCTED EMISSION ...................................................................................................................................8 2.2.2 RADIATED EMISSION .......................................................................................................................................9 3. 47 CFR PART 15B REQUIREMENTS ...................................................................................................11 3.1 CONDUCTED EMISSION ............................................................................................................................11 3.1.1 REQUIREMENT ...............................................................................................................................................11 3.1.2 TEST DESCRIPTION .......................................................................................................................................11 3.1.3 TEST RESULT .................................................................................................................................................11 3.2 RADIATED EMISSION ................................................................................................................................16 3.2.1 REQUIREMENT ...............................................................................................................................................16 3.2.2 TEST DESCRIPTION .......................................................................................................................................16 3.2.3 FREQUENCY RANGE OF MEASUREMENT ...................................................................................................... 16 3.2.4 TEST RESULT .................................................................................................................................................17 Change History Issue Date Reason for change 1.0 January 21, 2014 First edition Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 2 of 20

Report No.: SZ13120125E01 1. GENERAL INFORMATION 1.1 EUT Description EUT Type: Mobile Phone Serial No: (n.a., marked #1 by test site) Hardware Version: 213073 Software Version: X9006_10_1.01_131216 Applicant: GUANGDONG OPPO MOBILE TELECOMMUNICATIONS CORP.,LTD. NO.18 HAIBIN ROAD, WUSHA, CHANG'AN, DONGGUAN, GUANGDONG, CHINA Manufacturer: GUANGDONG OPPO MOBILE TELECOMMUNICATIONS CORP.,LTD. NO.18 HAIBIN ROAD, WUSHA, CHANG'AN, DONGGUAN, GUANGDONG, CHINA Power supply: Battery Brand Name: OPPO Model No.: BLP569 Serial No.: (n.a. marked #1 by test site) Capacity: 2700mAh Rated Voltage: 3.8V Charge Limit: 4.35V Ancillary AC Adapter (Charger for Battery) Equipment1: Brand Name: OPPO Model No.: AK717 Serial No.: (n.a. marked #1 by test site) Rated Input: 100-240V, 50/60Hz, 300mA Rated Output: 5V, 2000mA Ancillary AC Adapter (Charger for Battery) Equipment2: Brand Name: OPPO Model No.: AK719 Serial No.: (n.a. marked #1 by test site) Rated Input: 100-240V, 50/60Hz, 700mA Rated Output: 5V, 4500mA NOTE: 1. The EUT is a Mobile Phone, It supports GSM850MHz, 1900MHz, GPRS, EDGE, WCDMA BandⅡ, BandⅣ, BandⅤ, HSUPA, HSDPA, HSPA+, LTE Band4, Band17, GPS, NFC, ISM 2.4GHz Bluetooth band and WIFI (802.11a/b/g/n/ac/N20/N40) band. 2. it is equipped with a T-Flash card slot, a Micro-USB port which can be connected to the ancillary equipments e.g. the PC. Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 3 of 20

Report No.: SZ13120125E01 3. Please refer to Annex A for the photographs of the EUT. For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 4 of 20

Report No.: SZ13120125E01 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart B: No. Identity Document Title 1 47 CFR Part 15(10-1-12 Edition) Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 15.107 Conducted Emission PASS 2 15.109 Radiated Emission PASS NOTE: The tests were performed according to the method of measurements prescribed in ANSI C63.4-2009. Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 5 of 20

Report No.: SZ13120125E01 1.3 Facilities and Accreditations 1.3.1 Facilities Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L3572. All measurement facilities used to collect the measurement data are located at FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 518101. The test site is constructed in conformance with the requirements of ANSI C63.4-2009 and CISPR Publication 22:2008; the FCC registration number is 695796. 1.3.2 Facilities During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 - 60 Atmospheric Pressure (kPa): 86 -106 1.3.3 Measurement Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Uncertainty of Conducted Emission: ±1.8dB Uncertainty of Radiated Emission: ±3.1dB Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 6 of 20

Report No.: SZ13120125E01 2. TEST CONDITIONS SETTING 2.1 Test Mode 1 The first test mode (Data Transmission) The EUT configuration of the emission tests is EUT + Battery + T-Flash Card + PC. In this test mode, the EUT with a T-Flash Card embedded was connected to a PC via the Micro-B USB port. During the measurement, the date is transmitting between the PC and the T-Flash Card of the EUT. 2 The second test mode (Standby) The EUT configuration of the emission tests is EUT + Battery + Charger. During the measurement, the EUT was charged by its adapter and turned on. Note: All test modes are performed with the two adapters respectively, only the worst case(Data Transmission) is recorded in this report. Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 7 of 20

Report No.: SZ13120125E01 2.2 Test Setup and Equipments List 2.2.1 Conducted Emission A. Test Setup: < 40cm > < 80cm > EUT Pulse Limiter < 80cm > LISN Receiver The EUT is placed on a 0.8m high insulating table, which stands on the grounded conducting floor, and keeps 0.4m away from the grounded conducting wall. The EUT is connected to the power mains through a LISN which provides 50Ω/50µH of coupling impedance for the measuring instrument. A Pulse Limiter is used to protect the measuring instrument. The factors of the whole test system are calibrated to correct the reading. B. Equipments List: Description Manufacturer Model Serial No. Cal. Date Due. Date Receiver Narda PMM 9010 595WX11007 12/11/2013 11/11/2014 EMC Analyzer Agilent E7405A US44210471 12/05/2013 11/05/2014 LISN Schwarzbeck NSLK 8127 812744 12/05/2013 11/05/2014 Pulse Limiter (20dB) Schwarzbeck VTSD 9561-D 9391 (n.a.) (n.a.) System Simulator Agilent E5515C GB43130131 12/05/2013 11/05/2014 PC Lenovo ThinkPadT61 ZZF3077 (n.a.) (n.a.) Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 8 of 20

Report No.: SZ13120125E01 2.2.2 Radiated Emission A. Test Setup: 1) For radiated emissions from 30MHz to1GHz 2) For radiated emissions above 1GHz The test is performed in a 3m Semi-Anechoic Chamber; the antenna factor, cable loss and so on of the site (factors) is calculated to correct the reading. The EUT is placed on a 0.8m high insulating Turn Table, Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 9 of 20

Report No.: SZ13120125E01 and keeps 3m away from the Test Antenna, which is mounted on a variable-height antenna master tower. For the test Antenna: In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) and Horn Test Antenna (above 1GHz) are used. Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. The emission levels at both horizontal and vertical polarizations should be tested. B. Equipments List: Description Manufacturer Model Serial No. Cal. Date Due. Date EMC Analyzer Agilent E7405A US44210471 12/05/2013 11/05/2014 Semi-Anechoic Albatross 9m*6m*6m (n.a.) 12/05/2012 11/05/2014 Chamber Test Antenna - Bi-Log Schwarzbeck VULB 9163 9163-274 12/05/2012 11/05/2014 Test Antenna - Horn Schwarzbeck BBHA 9120D 9120D-963 12/05/2012 11/05/2014 PC Lenovo ThinkPadT61 ZZF3077 (n.a.) (n.a.) Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 10 of 20

Report No.: SZ13120125E01 3. 47 CFR PART 15B REQUIREMENTS 3.1 Conducted Emission 3.1.1 Requirement According to FCC section 15.107, the radio frequency voltage that is conducted back onto the AC power line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50µH/50Ω line impedance stabilization network (LISN). Conducted Limit (dBµV) Frequency range (MHz) Quasi-peak Average 0.15 - 0.50 66 to 56 56 to 46 0.50 - 5 56 46 5 - 30 60 50 NOTE: a) The limit subjects to the Class B digital device. b) The lower limit shall apply at the band edges. c) The limit decreases linearly with the logarithm of the frequency in the range 0.15 - 0.50MHz. 3.1.2 Test Description See section 2.2.1 of this report. 3.1.3 Test Result The maximum conducted interference is searched using Peak (PK), Quasi-peak (QP) and Average (AV) detectors; the emission levels more than the AV and QP limits, and that have narrow margins from the AV and QP limits will be re-measured with AV and QP detectors. Tests for both L phase and N phase lines of the power mains connected to the EUT are performed. All test modes are considered, refer to recorded points and plots below. A. Test Plot and Suspicious Points: Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 11 of 20

Report No.: SZ13120125E01 (Plot A: Adapter AK717, L Phase) Fre. Emission Level (dBµV) Limit (dBµV) NO. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.15 43.89 24.65 66.00 56.00 PASS 2 0.22 45.93 21.84 64.00 54.00 PASS 3 0.25 42.67 20.08 63.14 53.14 PASS Line 4 0.315 38.84 15.67 61.29 51.29 PASS 5 0.38 37.17 12.57 59.43 49.43 PASS 6 15.43 33.65 28.49 60.00 50.00 PASS Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 12 of 20

Report No.: SZ13120125E01 (Plot B: Adapter AK717, N Phase) Fre. Emission Level (dBµV) Limit (dBµV) NO. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.15 45.66 25.02 66.00 56.00 PASS 2 0.22 44.49 22.01 64.00 54.00 PASS 3 0.295 42.26 11.28 61.86 51.86 PASS Neutral 4 0.35 39.92 21.86 60.29 50.29 PASS 5 15.43 36.46 33.24 60.00 50.00 PASS 6 16.015 36.77 34.18 60.00 50.00 PASS Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 13 of 20

Report No.: SZ13120125E01 (Plot C: Adapter AK719, L Phase) Fre. Emission Level (dBµV) Limit (dBµV) NO. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.15 49.54 20.15 66.00 56.00 PASS 2 0.53 38.37 38.25 56.00 46.00 PASS 3 1.725 38.13 37.28 56.00 46.00 PASS Line 4 1.79 38.18 38.17 56.00 46.00 PASS 5 5.98 39.36 36.82 60.00 50.00 PASS 6 9.84 39.46 35.54 60.00 50.00 PASS Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 14 of 20

Report No.: SZ13120125E01 (Plot D: Adapter AK719, N Phase) Fre. Emission Level (dBµV) Limit (dBµV) NO. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.21 50.14 10.05 64.29 54.29 PASS 2 0.53 34.25 34.22 56.00 46.00 PASS 3 1.325 33.79 33.79 56.00 46.00 PASS Neutral 4 4.785 32.77 26.37 56.00 46.00 PASS 5 5.44 37.15 35.62 60.00 50.00 PASS 6 5.98 42.61 19.96 60.00 50.00 PASS Test Result: PASS Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 15 of 20

Report No.: SZ13120125E01 3.2 Radiated Emission 3.2.1 Requirement According to FCC section 15.109(a), the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values: Frequency Field Strength Field Strength Limitation at 3m Measurement Dist range (MHz) µV/m Dist (µV/m) (dBµV/m) 30.0 - 88.0 100 3m 100 20log 100 88.0 - 216.0 150 3m 150 20log 150 216.0 - 960.0 200 3m 200 20log 200 Above 960.0 500 3m 500 20log 500 As shown in FCC section 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector. When average radiated emission measurements are specified in this part, including emission measurements below 1000MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20dB above the maximum permitted average limit for the frequency being investigated unless a different peak emission limit is otherwise specified in the rules. Note: 1) The tighter limit shall apply at the boundary between two frequency range. 2) Limitation expressed in dBµV/m is calculated by 20log Emission Level(µV/m). 3) If measurement is made at 3m distance, then F.S Limitation at 3m distance is adjusted by using the formula of Ld1 = Ld2 * (d2/d1)2. Example: F.S Limit at 30m distance is 30µV/m, then F.S Limitation at 3m distance is adjusted as Ld1 = L1 = 30µV/m * (10)2 = 100 * 30µV/m 3.2.2 Test Description See section 2.2.2 of this report. 3.2.3 Frequency range of measurement Highest frequency generated or used in the device is the highest speed of the processor, lowest frequency generated or used in the device is the lowest frequency of the oscillator. According to 15.33(b)(1), the frequency range of radiated measurement for the EUT is listed in the following table: Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 16 of 20

Report No.: SZ13120125E01 Frequency generated or used in the Frequency range of radiated Frequency device measurement in the report Highest 2.26GHz 11.3GHz 3.2.4 Test Result The maximum radiated emission is searched using PK, QP and AV detectors; the emission levels more than the limits, and that have narrow margins from the limits will be re-measured with AV and QP detectors. Both the vertical and the horizontal polarizations of the Test Antenna are considered to perform the tests. All test modes are considered, refer to recorded points and plots below. The amplitude of spurious emissions which are attenuated more than 20 dB below the permissible value need not be reported. Note: All radiated emission tests were performed in X, Y, Z axis direction, and only the worst axis test condition was recorded in this test report. A. Test Plots and Suspicious Points: (Plot A: Adapter AK717, 30MHz – 12GHz, ANT-V) Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 17 of 20

Report No.: SZ13120125E01 NO. Fre. Pk QP AV Limit- Limit- Limit- Antenna Verdict (MHz) PK QP AV 1 264.638 N.A 27.60 N.A N.A 46.0 N.A Vertical Pass 2 479.925 N.A 45.28 N.A N.A 46.0 N.A Vertical Pass 3 579.102 N.A 31.74 N.A N.A 46.0 N.A Vertical Pass 4 716.983 N.A 32.21 N.A N.A 46.0 N.A Vertical Pass 5 958.878 N.A 43.85 N.A N.A 46.0 N.A Vertical Pass 6 2870.324 44.19 N.A 35.67 74.0 N.A 54.0 Vertical Pass (Plot B: Adapter AK717, 30MHz – 12GHz, ANT-H) NO. Fre. Pk QP AV Limit- Limit- Limit- Antenna Verdict (MHz) PK QP AV 1 267.057 N.A 31.36 N.A N.A 46.0 N.A Horizontal Pass 2 310.599 N.A 33.06 N.A N.A 46.0 N.A Horizontal Pass 3 371.072 N.A 32.33 N.A N.A 46.0 N.A Horizontal Pass 4 479.925 N.A 45.01 N.A N.A 46.0 N.A Horizontal Pass 5 958.878 N.A 43.55 N.A N.A 46.0 N.A Horizontal Pass 6 2870.324 44.79 N.A 36.15 74.0 N.A 54.0 Horizontal Pass Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 18 of 20

Report No.: SZ13120125E01 (Plot C: Adapter AK719, 30MHz – 12GHz, ANT-V) NO. Fre. (MHz) Pk QP AV Limit- Limit- Limit- Antenna Verdict PK QP AV 1 68.703 N.A 22.78 N.A N.A 40.0 N.A Vertical Pass 2 167.880 N.A 24.57 N.A N.A 43.5 N.A Vertical Pass 3 876.633 N.A 29.51 N.A N.A 46.0 N.A Vertical Pass 4 2640.898 41.61 N.A 35.29 74.0 N.A 54.0 Vertical Pass 5 2845.387 41.88 N.A 34.91 74.0 N.A 54.0 Vertical Pass 6 11053.367 38.93 N.A 33.02 74.0 N.A 54.0 Vertical Pass Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 19 of 20

Report No.: SZ13120125E01 (Plot D: Adapter AK719, 30MHz – 12GHz, ANT-H) NO. Fre. (MHz) Pk QP AV Limit- Limit- Limit- Antenna Verdict PK QP AV 1 73.541 N.A 16.39 N.A N.A 40.0 N.A Horizontal Pass 2 172.718 N.A 24.59 N.A N.A 43.5 N.A Horizontal Pass 3 240.449 N.A 23.88 N.A N.A 46.0 N.A Horizontal Pass 4 477.506 N.A 25.16 N.A N.A 46.0 N.A Horizontal Pass 5 2436.409 43.74 N.A 37.16 74.0 N.A 54.0 Horizontal Pass 6 11925.935 39.04 N.A 32.84 74.0 N.A 54.0 Horizontal Pass Test Result: PASS **END OF REPORT ** Shenzhen Morlab Communications Technology Co., Ltd Phone: +86 (0) 755 36698555 Web site: http://www.morlab.cn/ Fax: +86 (0) 755 36698525 Email: info_sz@morlab.cn Page 20 of 20


Document Created: 2014-04-01 11:01:32
Document Modified: 2014-04-01 11:01:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC