DIPOLE 2450MHz CALIBRATION REPORT

FCC ID: R9C-R827

RF Exposure Info

Download: PDF
FCCID_2140181

((. \ SATIMO Te micuware visoncompany .. SAR Reference Dipole Calibration Report Ref : ACR.269.5.13.SATU.A SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO., LTD FL3, BUILDING A, FEIYANG SCIENCE PARK, NO.8 LONGCHANG ROAD, BLOCK 67, BAOAN DISTRICT, SHENZHEN, GUANGDONG PROVINCE, P.R. CHINA SATIMO COMOSAR REFERENCE DIPOLE FREQUENCY: 2450 MHZ SERIAL NO.: SN 30/13 DIP2G450—263 Calibrated at SATIMO US 2105 Barrett Park Dr, — Kennesaw, GA 30144 « iA (accreptren) Calteation CERT #220002 09/25/2013 Summary: This documentpresents the method and results from an accredited SAR reference dipole calibration performed in SATIMO USA using the COMOSAR test bench. All calibration results are traceable to national metrologyinstitutions

SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR 269 5.13.SATU A 2 Name Function Date Signature Prepared by : Jérome LUC Product Manager 9/26/2013 fi’ Checked by : Jérome LUC Product Manager 9/26/2013 fi' Approved by : Kim RUTKOWSKI Quality Manager 9/26/2013 Jum Aathnet Customer Name Shenzhen Morlab . ol Communications Distribution : Technology Co., Ltd Issue Date Modifications A 9/26/2013 Initial release Page: 2710 This document shall not be reproduced, except infull or in part, without the writen approval of4TTMO The information contained herein is to he used onlyfor the purposefor which it is submittedand is not to be released in whole orpart without written approval ofS1TIMO

(t. SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR 269.5.13 SATU A TABLE OF CONTENTS $ IMHOGUENION um mmeetconmmcimeninommmcrmaninaanensinesnaniin .................. 4 2 D@ViC@ UMGET TSb .........cssssssssscccnnmmmmmnnnnmmmmnnnennmmnnnennnnmmsesennmmmnsnsnnnmnsrennsmnssemnnmmen 4 3. PIOGUELIDOSCHIHON .. :som omm fesceemmmennererecetecreerescrnncecteryrsemeeniorentereenczczn 4 3.1 General Information 4 4 MOBSUIEEREMELRO ... :: srmmcrnemmmmncmrmerminmeranmnimnemicmimmansismee® 4.1 Return Loss Requirements $ 4.2 Mechanical Requirements 5 5 Measurement YTHOETLATRNY :0000 ene0oreet ce ienss cteveeeronitrersetereeenenensoonnesmentesecrnevenees 5 5.1 Return Loss 5 52 Dimension Measurement 5 5.3 Validation Measurement 5 6 CalibrtiOM MEASUTEMENE R@SUIS..............sssssssssss0memmmmmnnnmmmnnsesnnnmmnnnennnmnnmnnnmmes 6 6.1 Return Loss 6 6.2 Mechanical Dimensions 6 7 Validation measurement... .................................................................................... 7 7.1 Measurement Condition 7 7.2 Head Liquid Measurement 7 7.3 Measurement Result 8 74 Body Measurement Result 9 $ LHSEOFEGUIPMONL iss css comermermmeesmermemeninemintitiinmvactemereetcenys ................. 10 Page: 3710 This document shall not be reproduced, ecept infull or in part, without the written approval oSATIMO: The information contained herein is to be used onlyfor the purposefor which itis submitted and is not to be released in whole or part without written approval ofS1TBAO.

{( £.a \ SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR 260.5.13 SATU A 1 INTRODUCTION This document contains a summary of the requirements set forth by the IEEE 1528, OET 65 Bulletin C and CEVIEC 62209 standards for reference dipoles used for SAR measurementsystem validations and the measurements that were performed to verify that the product complies with the fore mentioned standards. 2 DEVICE UNDER TEST Device Under Test Device Type COMOSAR 2450 MHz REFERENCE DIPOLE Manufacturer Satimo Model $1D2450 Serial Number SN 30/13 DIP2G450—263 Product Condition (new / used) New A yearly calibration interval is recommended. 3 PRODUCT DESCRIPTION 3.1 GENERAL INFORMATION Satimo‘s COMOSAR Validation Dipoles are built in accordance to the IEEE 1528, OET 65 Bulletin C and CEVIEC 62209 standards. The product is designed for use with the COMOSAR test bench only. r-—-f-f Figure 1 — Satimo COMOSAR Validation Dipole Page: 410 This document shall not be reproduced, exceptinfull or in part, without the writeen approval ofSATIMO The information containedhereinis to be use onlyfor the purposefor which it is submitted andis not to be releasedin whole or part without written approval ofSATBAO

(L. \ SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR 269 5.13 SATU A BL\TIN}D 4 MEASUREMENT METHOD The IEEE 1528, OET 65 Bulletin C and CEV/IEC 62209 standards provide requirements for reference dipoles used for system validation measurements. The following measurements were performed to verify that the product complies with the fore mentioned standards. 4.1 RETURNLOSS REQUIREMENTS The dipole used for SAR system validation measurements and checks must have a return loss of—20 dB or better. The return loss measurement shall be performed against a liquid filled flat phantom, with the phantom constucted as outlined in the fore mentioned standards. 4.2 MECHANICAL REQUIREMENTS The IEEE Std. 1528 and CEV/IEC 62209 standards specify the mechanical components and dimensions of the validation dipoles, with the dimensions frequency and phantom shell thickness dependent. The COMOSAR test bench employs a 2 mm phantom shell thickness therefore the dipoles sold for use with the COMOSAR test bench comply with the requirements set forth for a 2 mm phantom shell thickness. 5 MEASUREMENT UNCERTAINTY All uncertainties listed below represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2, traceable to the Internationally Accepted Guides to Measurement Uncertainty. 5.1 RETURNLOSS The following uncertainties apply to the return loss measurement: Frequency band Expanded Uncertainty on Return Loss 400—6000MHz 0.1 dB 5.2 DIMENSION MEASUREMENT The following uncertainties apply to the dimension measurements: Length (mm) Expanded Uncertainty on Length 3 — 300 0.05 mm 5.3 VALIDATION MEASUREMENT The guidelines outlined in the IEEE 1528, OET 65 Bulletin C, CENELEC ENS0361 and CEMEC 62209 standards were followed to generate the measurement uncertainty for validation measurements. Scan Volume Expanded Uncertainty 1g 20.3 % 10 g 20.1 % Page: 510 This document shall not be reproduced, except infull or in part, withou the written approval ofATIMO The information contained herein is to be used only for the purposefor which i is submittedand is not to be released in whole or part without writen approval ofS1TIMO

SAR REFERENCE DIPOLECALIBRATION REPORT Ref: ACR.269.5.13.SATU A SATIMo 6 CALIBRATION MEASUREMENT RESULTS URN LOSS Frequency (MHz) Return Loss (dB) Requirement (dB) 2450 —21.06 —20 6.2 MECHANICAL DIMENSIONS Frequency MHz L mm h mm d mm required measured required measured required measured 300 420.0 £1% 250.0 21 % 635 +1% | aso 290.0 +1 % 166.7 +1% 635 +1% 750 176.0 41 % 100.0 +1 % 635 +1 % | sas 161.041% sa.8 +1 % 16+1% | 900 149.0 +1 % 83.3 +1% 3.611% 1450 89.1 +1 % 51.741% 3.6:1% 1500 80.5 41 % 50.0 +1 %. 16 +1% 1640 79.0 £1% 45.7 +1 % 16+1% 1750 75.2 +1 % 42.9 +1 % 3611 % 1800 72.0 £1% 41.741% 3641% 1900 68.0 +1 % 39.5 41% 16+1% 1950 66.3 +1 % 38.5 +1 % 3.6 11 % 2000 64.5 +1 % 375 +1 % 16+1% 2100 61.0 +1% 35.741% 16:1% 2300 55.5 +1 % 326+41% 16+1% 2450 51.5 41 % pass 30.4 +1 % PaS$ 36+1% PaS$ 2600 48.5 +1 % 28.8 £1% 36 11% 3000 a15 +1% 25.0 +1 % 36 +1% 3500 37.0+1% 264 +1% 16+1% 3700 34.7+1% 264 41% 1611% Page: 6/10 This document shall not be reproduced, except in full or in part, without the written approval of SATIMO The information contained herein is to be used onl for the purposefor whichit is submitted and is not to be released in whole or part without written approval of SATBAO

SAR REFERENCE DIPOLE CALIBRATION REPORT Ref. ACR 269 5.13 SATUA 7 VALIDATION MEASUREMENT The IEEE Std. 1528, OET 65 Bulletin C and CEVIEC 62209 standards state that the system validation measurements must be performed using a reference dipole meeting the fore mentioned return loss and mechanical dimension requirements. The validation measurement must be performed against a liquid filled flat phantom, with the phantom constructed as outlined in the fore mentioned standards. Per the standards, the dipole shall be positioned below the bottom of the phantom, with the dipole length centered and parallel to the longest dimension of the flat phantom, with the top surface of the dipole at the described distance from the bottom surface ofthe phantom. 7.1 MEASUREMENT CONDITION Software OPENSAR V4 Phantom SN 20/09 SAM71 Probe SN 18/11 EPG122 Liquid Head Liquid Values: eps‘ 38.6 sigma 1.82 Distance between dipole center and liquid 10.0 mm Area scan resolution dx—Smm/dy—$mm Zoon Scan Resolution dx=8mm/dy=8m/dz=5mm Frequency 2450 MHz Input power 20 dBm Liguid Temperature 2 °C Lab Temperature 21 °C Lab Humidity 45% 7.2 HEAD LIQUID MEASUREMENT Pr 'M“"H'l'"" Relative permittivity (e,‘) Conductivity (0) 5/m required measured required measured 300 45.3 45 % 0.87 25 % aso 43.5 15 % 0.87 +5 % 750 41.945% 0.89 +5 % 835 41.5 15 % 0.90 15 % 900 41.5 15 % 0.97 25 % 1450 40.5 15 % 1.20 15 % 1500 40.4 25 % 123 15% 1640 40.2 +5 % 13115% 1750 40.1 25 % 13745 % 1800 40.0 15 % 1.40 25 % 1900 40.0 +5 % 1.40 45 % 1950 40.0 +5 % 140 15 % 2000 40.0 25 % 1.40 45 % 2100 39.8 15 % 14945 % 2300 30.5 +5 % 167 15 % 2450 30.245% Pass 1.80 +5 % pass 2600 39.0 +5 % 19515 % 3000 38.5 15 % 2.40 45 % 3500 37.9 25 % 2.91 25 % Page: 710 This document shall not be reproduced, except infill or in part, without the writen approval of$ATTMO The information containedherein is to be used only for the purposefor which it is submitted andis not to be released in whale or part without written approval ofSATIMO

(1 SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR 2695.13 SATU A sarimo 7.3 MEASUREMENT RESULT The IEEE Std. 1528 and CEVIEC 62209 standards state that the system validation measurements should produce the SAR values shown below (for phantom thickness of 2 mm), within the uncertainty for the system validation. All SAR values are normalized to 1 W forward power. In bracket, the measured SAR is given with the used input power. hn‘ 1 5 San (w/kg/w) 10 g SAR (W/ke/w) required measured required measured 300 285 1.94 450 4.58 3.06 750 8.49 5.55 835 9.56 6.22 900 10.9 6.99 1450 29 16 1500 30. 16.8 1640 34.2 184 1750 36.4 193 1800 38.4 20.1 1900 39.7 20.5 1950 40.5 20.9 2000 411 211 2100 43.6 219 2300 48.7 233 2450 524 54.77 (5.48) 24 23.81 (2.38) 2600 55.3 24.6 3000 63.8 25.7 3500 671 25 Page: 810 This document shall not be reproduced, exceptin fill or in part, without the writen approval ofSATIMO. The information contained herein is to beused only for the purpose for whichit is submitted andis not to bereleasedin whole or part without writen approval of STIMO

(v.\ SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR.269.5.13.SATU A SsArimo 74— BODY MEASUREMENT RESULT Software OPENSAR V4 Phantom SN 20/09 SAMT7 Probe SN 18/11 EPG122 Liquid Body Liquid Values: eps‘ 52.0 sigma 1.94 Distance between dipole center and liquid 10.0 mm Area scan resolution dx—8mm/d Zoon Scan Resolution dx=8mm/dy Frequency 2450 MHz Input power 20 dBm Liquid Temperature 21°C Lab Temperature 21°C Lab Humidity 45% F":n'::"" 1 g SAR (W/ke/w) 10 g SAR (/ke/w) measured measured 2450 56.09 (5.61) 25.38 (2.54) \ UR\ T Page: 910 This document shall not be reproduced, exceptin full or in part, without the written approval of SATIMO The information contained herein is to heused only for the purpose for whichit is submitied and is not to bereleasedin whole or part without written approval of SATBO

((c.. SAR REFERENCE DIPOLE CALIBRATION REPORT Ref: ACR 269 5.13 SATU A SArIMo 8 LIST OF EQUIPMENT Equipment Summary Sheet Equipment Manufacturer / Current Next Calibration Description Model [19498=000M9—/ Cuppration PDate Date ; Validated. No cal Validated. No cal SAM Phantom Satimo SN—20/08—SAM71 required required. ; Validated. No cal Validated. No cal |COMOSAR Test Bench Version 3 NA Fequired. required. Network Analyzer RhOde8Schware ggoo132 o22013 oaro16 Calipers Carrera CALIPER—01 1212010 1212013 . Characterized prior to |Characterized prior to Reference Pibbe Setimg EPGIZZ SNI1BH test. No cal required. |test. No cal required Multimeter Keithley 2000 1188656 1172010 1172013 Signal Generator Agilent E4438C MY49070581 1212010 1212013 R Characterized prior to |Characterized prior to Amplificr Aethercomm sh 046 test. No cal required. [test. No cal required. Power Meter HP E4418A US38261498 1172010 112013 Power Sensor HP ECP—E26A US37181460 1172010 1172013 ho s Characterized prior to |Characterized prior to Directional Coupter Narda 4216—20 91306 test. No cal required. |test. No cal required. Temperature and Humidity Sensor Control Company 11—661—9 32012 312014 Page: 1010 This document shall not be reproduced, except infull or in part, without the writen approval of$ATIMO The informationcontained herein is o be used onlyfor the purpasefor which it is submitted and is not to be releasedin whole or part without written approval ofS1TIAO


Document Created: 2013-09-27 17:52:20
Document Modified: 2013-09-27 17:52:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC