SAR Report-9

FCC ID: R9C-R8006

RF Exposure Info

Download: PDF
FCCID_2237813

                                              ((. \
                                   SATIMO
                                   Te micuware visoncompany ..




      SAR Reference Dipole Calibration Report



                                          Ref : ACR.269.5.13.SATU.A




 SHENZHEN MORLAB COMMUNICATIONS
       TECHNOLOGY CO., LTD
  FL3, BUILDING A, FEIYANG SCIENCE PARK, NO.8
               LONGCHANG ROAD,
BLOCK 67, BAOAN DISTRICT, SHENZHEN, GUANGDONG
              PROVINCE, P.R. CHINA
   SATIMO COMOSAR REFERENCE DIPOLE
          FREQUENCY: 2450 MHZ
          SERIAL NO.: SN 30/13 DIP2G450—263

                           Calibrated at SATIMO US
                  2105 Barrett Park Dr, — Kennesaw, GA 30144


                                        «   iA
                                        (accreptren)
                                        Calteation CERT #220002

                                         09/25/2013


    Summary:

    This documentpresents the method and results from an accredited SAR reference dipole calibration
    performed in SATIMO USA using the COMOSAR test bench. All calibration results are traceable
    to national metrologyinstitutions


                         SAR REFERENCE DIPOLE CALIBRATION REPORT                                                   Ref: ACR 269 5.13.SATU A

         2




                                  Name                              Function                          Date                  Signature
Prepared by :                Jérome LUC                        Product Manager                   9/26/2013                   fi’

Checked by :                 Jérome LUC                        Product Manager                   9/26/2013                   fi'

Approved by :          Kim RUTKOWSKI                           Quality Manager                   9/26/2013                 Jum Aathnet




                                                                       Customer Name
                                                                      Shenzhen Morlab
                                         .     ol                     Communications
                                      Distribution :                  Technology Co.,
                                                                                 Ltd




   Issue                    Date                                                        Modifications
     A                  9/26/2013                 Initial release




                                                              Page: 2710

                This document shall not be reproduced, except infull or in part, without the writen approval of4TTMO
                The information contained herein is to he used onlyfor the purposefor which it is submittedand is not to
                be released in whole orpart without written approval ofS1TIMO


     (t.                     SAR REFERENCE DIPOLE CALIBRATION REPORT                                                       Ref: ACR 269.5.13 SATU A




                                                    TABLE OF CONTENTS



$      IMHOGUENION um mmeetconmmcimeninommmcrmaninaanensinesnaniin .................. 4
2      D@ViC@ UMGET TSb .........cssssssssscccnnmmmmmnnnnmmmmnnnennmmnnnennnnmmsesennmmmnsnsnnnmnsrennsmnssemnnmmen 4
3.     PIOGUELIDOSCHIHON .. :som omm fesceemmmennererecetecreerescrnncecteryrsemeeniorentereenczczn 4
     3.1     General Information                                                                                                                 4
4      MOBSUIEEREMELRO ... :: srmmcrnemmmmncmrmerminmeranmnimnemicmimmansismee®
     4.1      Return Loss Requirements                                                                                                           $

     4.2      Mechanical Requirements                                                                                                            5
5 Measurement YTHOETLATRNY :0000 ene0oreet ce ienss cteveeeronitrersetereeenenensoonnesmentesecrnevenees 5
     5.1      Return Loss                                                                                                                        5
     52       Dimension Measurement                                                                                                              5
     5.3      Validation Measurement                                                                                                             5
6      CalibrtiOM MEASUTEMENE R@SUIS..............sssssssssss0memmmmmnnnmmmnnsesnnnmmnnnennnmnnmnnnmmes 6
     6.1      Return Loss                                                                                                                        6
     6.2      Mechanical Dimensions                                                                                                              6
7      Validation measurement...               .................................................................................... 7
     7.1      Measurement Condition                                                                                                              7
     7.2      Head Liquid Measurement                                                                                                            7
     7.3      Measurement Result                                                                                                                  8

     74       Body Measurement Result                                                                                                            9
$      LHSEOFEGUIPMONL iss css comermermmeesmermemeninemintitiinmvactemereetcenys ................. 10




                                                                  Page: 3710

                    This document shall not be reproduced, ecept infull or in part, without the written approval oSATIMO:
                    The information contained herein is to be used onlyfor the purposefor which itis submitted and is not to
                    be released in whole or part without written approval ofS1TBAO.


    {( £.a \             SAR REFERENCE DIPOLE CALIBRATION REPORT                                                Ref: ACR 260.5.13 SATU A



1              INTRODUCTION


This document contains a summary of the requirements set forth by the IEEE 1528, OET 65 Bulletin
C and CEVIEC 62209 standards for reference dipoles used for SAR measurementsystem validations
and the measurements that were performed to verify that the product complies with the fore
mentioned standards.



2              DEVICE UNDER TEST




                                                   Device Under Test
          Device Type                                     COMOSAR 2450 MHz REFERENCE DIPOLE
          Manufacturer                                    Satimo
          Model                                           $1D2450
          Serial Number                                   SN 30/13 DIP2G450—263
          Product Condition (new / used)                  New

A yearly calibration interval is recommended.

3              PRODUCT DESCRIPTION

3.1       GENERAL INFORMATION

Satimo‘s COMOSAR Validation Dipoles are built in accordance to the IEEE 1528, OET 65 Bulletin
C and CEVIEC 62209 standards. The product is designed for use with the COMOSAR test bench
only.

                                    r-—-f-f




                                Figure 1 — Satimo COMOSAR Validation Dipole



                                                            Page: 410

                This document shall not be reproduced, exceptinfull or in part, without the writeen approval ofSATIMO
                The information containedhereinis to be use onlyfor the purposefor which it is submitted andis not to
                be releasedin whole or part without written approval ofSATBAO


  (L. \                  SAR REFERENCE DIPOLE CALIBRATION REPORT                                                  Ref: ACR 269 5.13 SATU A
BL\TIN}D

       4     MEASUREMENT METHOD
The IEEE 1528, OET 65 Bulletin C and CEV/IEC 62209 standards provide requirements for
reference dipoles used for system validation measurements. The following measurements were
performed to verify that the product complies with the fore mentioned standards.

      4.1     RETURNLOSS REQUIREMENTS
The dipole used for SAR system validation measurements and checks must have a return loss of—20
dB or better. The return loss measurement shall be performed against a liquid filled flat phantom,
with the phantom constucted as outlined in the fore mentioned standards.

       4.2    MECHANICAL REQUIREMENTS
The IEEE Std. 1528 and CEV/IEC 62209 standards specify the mechanical components and
dimensions of the validation dipoles, with the dimensions frequency and phantom shell thickness
dependent. The COMOSAR test bench employs a 2 mm phantom shell thickness therefore the
dipoles sold for use with the COMOSAR test bench comply with the requirements set forth for a 2
mm phantom shell thickness.


5            MEASUREMENT UNCERTAINTY

All uncertainties listed below represent an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2, traceable to the Internationally Accepted Guides to
Measurement Uncertainty.

       5.1   RETURNLOSS
The following uncertainties apply to the return loss measurement:
                      Frequency band                                   Expanded Uncertainty on Return Loss
                        400—6000MHz                                                              0.1 dB


       5.2    DIMENSION MEASUREMENT
The following uncertainties apply to the dimension measurements:
                        Length (mm)                                         Expanded Uncertainty on Length
                             3 — 300                                                            0.05 mm


       5.3    VALIDATION MEASUREMENT
The guidelines outlined in the IEEE 1528, OET 65 Bulletin C, CENELEC ENS0361 and CEMEC
62209 standards were followed to generate the measurement uncertainty for validation
measurements.

                         Scan Volume                                      Expanded Uncertainty
                                 1g                                                    20.3 %
                                 10 g                                                  20.1 %

                                                              Page: 510
                This document shall not be reproduced, except infull or in part, withou the written approval ofATIMO
                The information contained herein is to be used only for the purposefor which i is submittedand is not to
                be released in whole or part without writen approval ofS1TIMO


                              SAR REFERENCE DIPOLECALIBRATION REPORT                                                    Ref: ACR.269.5.13.SATU A
    SATIMo

           6     CALIBRATION MEASUREMENT RESULTS

                         URN LOSS




           Frequency (MHz)                                  Return Loss (dB)                                   Requirement (dB)
                2450                                             —21.06                                              —20

           6.2       MECHANICAL DIMENSIONS
     Frequency MHz                          L mm                                        h mm                                     d mm

                               required             measured                required            measured              required          measured
          300                420.0 £1%                                    250.0 21 %                                 635 +1%
|         aso                290.0 +1 %                                   166.7 +1%                                  635 +1%
          750                176.0 41 %                                   100.0 +1 %                                 635 +1 %

|         sas                161.041%                                      sa.8 +1 %                                  16+1%
|         900                149.0 +1 %                                    83.3 +1%                                  3.611%

         1450                 89.1 +1 %                                    51.741%                                   3.6:1%

         1500                 80.5 41 %                                    50.0 +1 %.                                16 +1%
         1640                 79.0 £1%                                     45.7 +1 %                                 16+1%
         1750                 75.2 +1 %                                    42.9 +1 %                                 3611 %

         1800                 72.0 £1%                                     41.741%                                   3641%

         1900                 68.0 +1 %                                    39.5 41%                                   16+1%
         1950                 66.3 +1 %                                    38.5 +1 %                                 3.6 11 %

         2000                 64.5 +1 %                                    375 +1 %                                  16+1%
         2100                 61.0 +1%                                     35.741%                                   16:1%
         2300                 55.5 +1 %                                    326+41%                                   16+1%
         2450                 51.5 41 %                pass                30.4 +1 %               PaS$              36+1%                PaS$
         2600                 48.5 +1 %                                    28.8 £1%                                  36 11%

         3000                 a15 +1%                                      25.0 +1 %                                 36 +1%
         3500                 37.0+1%                                      264 +1%                                   16+1%
         3700                 34.7+1%                                      264 41%                                   1611%

                                                                   Page: 6/10
                     This document shall not be reproduced, except in full or in part, without the written approval of SATIMO
                     The information contained herein is to be used onl for the purposefor whichit is submitted and is not to
                     be released in whole or part without written approval of SATBAO


                           SAR REFERENCE DIPOLE CALIBRATION REPORT                                                   Ref. ACR 269 5.13 SATUA




           7     VALIDATION MEASUREMENT
The IEEE Std. 1528, OET 65 Bulletin C and CEVIEC 62209 standards state that the system
validation measurements must be performed using a reference dipole meeting the fore mentioned
return loss and mechanical dimension requirements. The validation measurement must be performed
against a liquid filled flat phantom, with the phantom constructed as outlined in the fore mentioned
standards. Per the standards, the dipole shall be positioned below the bottom of the phantom, with
the dipole length centered and parallel to the longest dimension of the flat phantom, with the top
surface of the dipole at the described distance from the bottom surface ofthe phantom.

           7.1   MEASUREMENT CONDITION
Software                                                                OPENSAR V4
Phantom                                                                 SN 20/09 SAM71
Probe                                                                   SN 18/11 EPG122
Liquid                                                                  Head Liquid Values: eps‘ 38.6 sigma 1.82
Distance between dipole center and liquid                                10.0 mm
Area scan resolution                                                    dx—Smm/dy—$mm
Zoon Scan Resolution                                                    dx=8mm/dy=8m/dz=5mm
Frequency                                                               2450 MHz
Input power                                                             20 dBm
Liguid Temperature                                                      2 °C
Lab Temperature                                                         21 °C
Lab Humidity                                                            45%

          7.2    HEAD LIQUID MEASUREMENT

                           Pr 'M“"H'l'""          Relative permittivity (e,‘)             Conductivity (0) 5/m
                                                 required           measured           required          measured
                               300               45.3 45 %                             0.87 25 %
                               aso               43.5 15 %                             0.87 +5 %
                               750               41.945%                               0.89 +5 %
                               835               41.5 15 %                             0.90 15 %
                               900               41.5 15 %                             0.97 25 %

                              1450               40.5 15 %                             1.20 15 %
                              1500               40.4 25 %                             123 15%
                              1640               40.2 +5 %                             13115%
                              1750               40.1 25 %                             13745 %
                              1800               40.0 15 %                             1.40 25 %

                              1900               40.0 +5 %                             1.40 45 %
                              1950               40.0 +5 %                             140 15 %
                              2000               40.0 25 %                             1.40 45 %
                              2100               39.8 15 %                             14945 %
                              2300               30.5 +5 %                             167 15 %
                              2450               30.245%               Pass            1.80 +5 %            pass
                              2600               39.0 +5 %                             19515 %
                              3000               38.5 15 %                             2.40 45 %

                              3500               37.9 25 %                             2.91 25 %

                                                                Page: 710

                  This document shall not be reproduced, except infill or in part, without the writen approval of$ATTMO
                  The information containedherein is to be used only for the purposefor which it is submitted andis not to
                  be released in whale or part without written approval ofSATIMO


 (1                   SAR REFERENCE DIPOLE CALIBRATION REPORT                                                   Ref: ACR 2695.13 SATU A
sarimo
      7.3   MEASUREMENT RESULT
The IEEE Std. 1528 and CEVIEC 62209 standards state that the system validation measurements
should produce the SAR values shown below (for phantom thickness of 2 mm), within the
uncertainty for the system validation. All SAR values are normalized to 1 W forward power. In
bracket, the measured SAR is given with the used input power.

                      hn‘                       1 5 San (w/kg/w)                     10 g SAR (W/ke/w)
                                            required           measured           required          measured

                         300                  285                                    1.94

                         450                  4.58                                   3.06

                          750                 8.49                                   5.55

                         835                  9.56                                   6.22

                         900                   10.9                                  6.99

                         1450                   29                                    16

                         1500                 30.                                    16.8

                         1640                 34.2                                   184

                         1750                  36.4                                  193

                         1800                 38.4                                   20.1

                         1900                 39.7                                   20.5

                         1950                 40.5                                   20.9
                         2000                 411                                    211

                         2100                 43.6                                   219

                         2300                 48.7                                   233

                         2450                  524            54.77 (5.48)            24           23.81 (2.38)
                         2600                  55.3                                  24.6

                         3000                 63.8                                   25.7

                         3500                 671                                     25




                                                           Page: 810
             This document shall not be reproduced, exceptin fill or in part, without the writen approval ofSATIMO.
             The information contained herein is to beused only for the purpose for whichit is submitted andis not to
             bereleasedin whole or part without writen approval of STIMO


   (v.\                    SAR REFERENCE DIPOLE CALIBRATION REPORT                                                    Ref: ACR.269.5.13.SATU A
SsArimo
           74—   BODY MEASUREMENT RESULT
Software                                                                OPENSAR V4
Phantom                                                                  SN 20/09 SAMT7
Probe                                                                    SN 18/11 EPG122
Liquid                                                                   Body Liquid Values: eps‘          52.0 sigma         1.94
Distance between dipole center and liquid                               10.0 mm
Area scan resolution                                                    dx—8mm/d
Zoon Scan Resolution                                                    dx=8mm/dy
Frequency                                                                2450 MHz
Input power                                                              20 dBm
Liquid Temperature                                                       21°C
Lab Temperature                                                          21°C
Lab Humidity                                                             45%




                           F":n'::""                  1 g SAR (W/ke/w)                     10 g SAR (/ke/w)
                                                          measured                              measured

                              2450                       56.09 (5.61)                           25.38 (2.54)




                                                                                                    \ UR\ T




                                                                Page: 910
                  This document shall not be reproduced, exceptin full or in part, without the written approval of SATIMO
                  The information contained herein is to heused only for the purpose for whichit is submitied and is not to
                  bereleasedin whole or part without written approval of SATBO


 ((c..                       SAR REFERENCE DIPOLE CALIBRATION REPORT                                                  Ref: ACR 269 5.13 SATU A
SArIMo

         8    LIST OF EQUIPMENT


                                                  Equipment Summary Sheet

    Equipment                  Manufacturer /                                                   Current                 Next Calibration
    Description                       Model               [19498=000M9—/ Cuppration PDate                                         Date
                                           ;                                           Validated. No cal              Validated.         No cal
   SAM Phantom                        Satimo                SN—20/08—SAM71             required                       required.

                                           ;                                           Validated. No cal              Validated.         No cal
|COMOSAR Test Bench                 Version 3                         NA               Fequired.                      required.

  Network Analyzer             RhOde8Schware                     ggoo132                         o22013                       oaro16
         Calipers                     Carrera                  CALIPER—01                        1212010                      1212013

                                           .                                           Characterized prior to |Characterized prior to
  Reference Pibbe                     Setimg               EPGIZZ SNI1BH               test. No cal required. |test. No cal required

     Multimeter                   Keithley 2000                    1188656                       1172010                      1172013

  Signal Generator              Agilent E4438C                 MY49070581                        1212010                      1212013

          R                                                                            Characterized prior to |Characterized prior to
     Amplificr                     Aethercomm                      sh 046              test. No cal required. [test. No cal required.

    Power Meter                    HP E4418A                   US38261498                        1172010                      112013

   Power Sensor                  HP ECP—E26A                    US37181460                       1172010                      1172013

   ho                                            s                                     Characterized prior to |Characterized prior to
 Directional Coupter             Narda 4216—20                      91306              test. No cal required. |test. No cal required.
  Temperature and
  Humidity Sensor              Control Company                    11—661—9                       32012                        312014




                                                                Page: 1010
                    This document shall not be reproduced, except infull or in part, without the writen approval of$ATIMO
                    The informationcontained herein is o be used onlyfor the purpasefor which it is submitted and is not to
                    be releasedin whole or part without written approval ofS1TIAO



Document Created: 2013-09-27 17:52:20
Document Modified: 2013-09-27 17:52:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC