Test Report

FCC ID: R7PNG6R1S1

Test Report

Download: PDF
FCCID_1588936

Certification Test Report FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 11-0082.W06.11.B Manufacturer: Cellnet Technology, Inc. Models: Collector C6400, Collector C6420, Collector C6430 Test Begin Date: May 18, 2011 Test End Date: November 10, 2011 Report Issue Date: November 10, 2011 FOR THE SCOPE OF ACCREDITATION UNDER LAB Code 200612-0 This report is not be used to claim certification, approval, or endorsement by NVLAP, NIST or any government agency. Reviewed by: Kirby Munroe Director, Wireless Certifications ACS, Inc. This test report shall not be reproduced except in full. This report may be reproduced in part with prior written consent of ACS, Inc. The results contained in this report are representative of the sample(s) submitted for evaluation. This report contains 26 pages 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

TABLE OF CONTENTS 1 GENERAL ............................................................................................................................................ 3 1.1 PURPOSE.......................................................................................................................................... 3 1.2 PRODUCT DESCRIPTION ................................................................................................................... 3 1.2.1 Technical Details .................................................................................................................... 3 1.3 TEST METHODOLOGY AND CONSIDERATIONS ................................................................................. 4 2 TEST FACILITIES .............................................................................................................................. 4 2.1 LOCATION ....................................................................................................................................... 4 2.2 LABORATORY ACCREDITATIONS/RECOGNITIONS/CERTIFICATIONS ................................................ 4 2.3 RADIATED EMISSIONS TEST SITE DESCRIPTION .............................................................................. 5 2.3.1 Semi-Anechoic Chamber Test Site .......................................................................................... 5 2.3.2 Open Area Tests Site (OATS) ................................................................................................. 6 2.4 CONDUCTED EMISSIONS TEST SITE DESCRIPTION ........................................................................... 7 3 APPLICABLE STANDARD REFERENCES.................................................................................... 7 4 LIST OF TEST EQUIPMENT ............................................................................................................ 8 5 SUPPORT EQUIPMENT .................................................................................................................... 9 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM ........................................................... 9 7 SUMMARY OF TESTS ..................................................................................................................... 10 7.1 ANTENNA REQUIREMENT – FCC: SECTION 15.203 ....................................................................... 10 7.2 POWER LINE CONDUCTED EMISSIONS – FCC: SECTION 15.207 IC: RSS-GEN 7.2.4...................... 10 7.2.1 Measurement Procedure....................................................................................................... 10 7.2.2 Measurement Results ............................................................................................................ 10 7.3 PEAK OUTPUT POWER - FCC SECTION 15.247(B)(2) IC: RSS-210 A8.4(1)................................... 11 7.3.1 Measurement Procedure (Conducted Method) ..................................................................... 11 7.3.2 Measurement Results ............................................................................................................ 11 7.4 CHANNEL USAGE REQUIREMENTS ................................................................................................ 12 7.4.1 Carrier Frequency Separation – FCC: Section 15.247(a)(1) IC: RSS-210 A8.1(b) ............. 12 7.4.1.1 Measurement Procedure ................................................................................................................... 12 7.4.1.2 Measurement Results ....................................................................................................................... 12 7.4.2 Number of Hopping Channels – FCC: Section 15.247(a)(1)(i) IC: RSS-210 A8.1(c) .......... 13 7.4.3 Channel Dwell Time – FCC: Section 15.247(a)(1)(i) IC: RSS-210 A8.1(c) ......................... 15 7.4.3.1 Measurement Procedure ................................................................................................................... 15 7.4.4 20dB / 99% Bandwidth - FCC: Section 15.247(a)(1)(i) IC: RSS-210 A8.1(c) .................... 15 7.4.4.1 Measurement Procedure ................................................................................................................... 15 7.4.4.2 Measurement Results ....................................................................................................................... 15 7.5 BAND-EDGE COMPLIANCE AND SPURIOUS EMISSIONS-FCC 15.247(D) IC: RSS-210 A8.5 .......... 21 7.5.1 Band-Edge Compliance of RF Conducted Emissions ........................................................... 21 7.5.1.1 Measurement Procedure ................................................................................................................... 21 7.5.1.2 Measurement Results ....................................................................................................................... 21 7.5.2 RF Conducted Spurious Emissions ....................................................................................... 23 7.5.2.1 Measurement Procedure ................................................................................................................... 23 7.5.2.2 Measurement Results ....................................................................................................................... 23 7.5.3 Radiated Spurious Emissions - FCC Section 15.205 IC: RSS-210 2.6 ................................ 24 7.5.3.1 Measurement Procedure ................................................................................................................... 24 7.5.3.2 Measurement Results ....................................................................................................................... 25 7.5.3.3 Sample Calculation: ......................................................................................................................... 26 8 CONCLUSION ................................................................................................................................... 26 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 1 GENERAL 1.1 Purpose The purpose of this report is to demonstrate compliance with Part 15 Subpart C of the FCC’s Code of Federal Regulations and Industry Canada’s Radio Standards Specification RSS-210 for Certification. 1.2 Product description The Collector C6400, Collector C6420 and Collector C6430 are fixed (i.e. pole mounted) two-way radio frequency devices that transmit data over a mesh network in the unlicensed 902-928 MHz frequency range for utility applications. The differences in model variants are described below. All variants are electrically identical with respect to the RF circuitry and differ only in the backhaul or secondary communication methods. Collector C6400: Ethernet only embedded GSM/GPRS or CDMA/EVDO wireless backhaul modem modules not populated. Collector C6420: Features embedded GSM/GPRS wireless backhaul modem FCC ID: AU792U09G17826 (modular approved). Collector C6430: Features embedded CDMA/EVDO wireless backhaul modem FCC ID: AU792U10E06831 (modular approved). 1.2.1 Technical Details The Collector C6400, Collector C6420 and Collector C6430 provide 3 distinct frequency hopping modes of operation as outlined below. Frequency Channel Data Rates Number of Mode of Operation Range Separation Supported Channels (MHz) (kHz) (kbps) 9.6, 19.2, 38.4, Wide Mode 902.3 - 927.8 86 300 115.2 Narrow Mode 904.0 - 927.9 240 100 9.6, 19.2, 38.4 Full Narrow Mode 902.3 - 927.8 256 100 9.6, 19.2, 38.4 SUN Mode 902.2 – 927.8 129 200 50.0 Modulation: FSK / GFSK Operating Voltage: 120 VAC Antenna Type / Gain: Omni-directional collinear whip antenna, +5.5 dBi RF Connector: N-Type Manufacturer Information: Cellnet Technology, Inc. 30000 Mill Creek Ave., Suite 100 Alpharetta, GA 30022 Test Sample Serial Numbers: LT-80735324, LT-807352FE Test Sample Condition: The test samples were provided in good working order with no visible defects. ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 3

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 1.3 Test Methodology and Considerations All modes of operation, including all available data rates, were evaluated. The data presented in this report represents the worst case where applicable. In most instances data was collected at frequencies representing the lowest and highest available for all modes of operation. Models Collector C6420 and Collector C6430 can transmit simultaneously with embedded modem modules FCC ID: AU792U09G17826 (GSM/GPRS) and FCC ID: AU792U10E06831 (CDMA/EVDO) therefore radiated inter-modulation products were evaluated for every simultaneous transmit combination. All inter-modulation products were found to be in compliance. The EUT is provided with (2) mounting hardware options, pole mount and arm mount. These hardware options determine the placement of the pre-approved modem module antennas therefore both hardware options were evaluated for radiated, including inter-modulation products, and AC power line conducted emissions. For radiated and AC power line conducted emissions, the EUT was placed on the test table in an orientation representative of final installation. The setup required the EUT chassis to sit above the test table such that the EUT was at or just above table height. 2 TEST FACILITIES 2.1 Location The radiated and conducted emissions test sites are located at the following address: Advanced Compliance Solutions 5015 B.U. Bowman Drive Buford, GA 30518 Phone: (770) 831-8048 Fax: (770) 831-8598 2.2 Laboratory Accreditations/Recognitions/Certifications ACS is accredited to ISO/IEC 17025 by the National Institute of Standards and Technology under their National Voluntary Laboratory Accreditation Program (NVLAP), Lab Code 200612-0. Unless otherwise specified, all tests methods described within this report are covered under the ISO/IEC 17025 scope of accreditation. The Semi-Anechoic Chamber Test Site, Open Area Test Site (OATS) and Conducted Emissions Site have been fully described, submitted to, and accepted by the FCC, Industry Canada and the Japanese Voluntary Control Council for Interference by information technology equipment. FCC Registration Number: 511277 Industry Canada Lab Code: IC 4175A-1 VCCI Member Number: 1831 • VCCI OATS Registration Number R-1526 • VCCI Conducted Emissions Site Registration Number: C-1608 ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 4

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 2.3 Radiated Emissions Test Site Description 2.3.1 Semi-Anechoic Chamber Test Site The Semi-Anechoic Chamber Test Site consists of a 20’ x 30’ x 18’ shielded enclosure. The chamber is lined with Toyo Ferrite Grid Absorber, model number FFG-1000. The ferrite tile grid is 101 x 101 x 19mm thick and weighs approximately 550 grams. These tiles are mounted on steel panels and installed directly on the inner walls of the chamber. The turntable is 150cm in diameter and is located 160cm from the back wall of the chamber. The chamber is grounded via 1 – 8’ copper ground rod, installed at the center of the back wall, it is bound to the ground plane using 3/4” stainless steel braided cable. The turntable is all steel, flush mounted table installed in an all steel frame. The table is remotely operated from inside the control room located 25’ from the range. The turntable is electrically bonded to the surrounding ground plane via steel fingers installed on the edge of the turn table. The steel fingers make constant contact with the ground plane during operation. Behind the turntable is a 3’ x 6’ x 4’ deep shielded pit used for support equipment if necessary. The pit is equipped with 1 – 4” PVC chases from the turntable to the pit that allow for cabling to the EUT if necessary. The underside of the turntable can be accessed from the pit so cables can be supplied to the EUT from the pit. A diagram of the Semi-Anechoic Chamber Test Site is shown in Figure 2.3-1 below: 3 Meters 5 Feet Diameter 20 Feet 30 Feet Figure 2.3-1: Semi-Anechoic Chamber Test Site ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 5

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 2.3.2 Open Area Tests Site (OATS) The open area test site consists of a 40’ x 66’ concrete pad covered with a perforated electro- plated galvanized sheet metal. The perforations in the sheet metal are 1/8” holes that are staggered every 3/16”. The individual sheets are placed to overlap each other by 1/4” and are riveted together to provide a continuous seam. Rivets are spaced every 3” in a 3 x 20 meter perimeter around the antenna mast and EUT area. Rivets in the remaining area are spaced as necessary to properly secure the ground plane and maintain the electrical continuity. The entire ground plane extends 12’ beyond the turntable edge and 16’ beyond the antenna mast when set to a 10 meter measurement distance. The ground plane is grounded via 4 – 8’ copper ground rods, each installed at a corner of the ground plane and bound to the ground plane using 3/4” stainless steel braided cable. The turntable is an all aluminum 10’ flush mounted table installed in an all aluminum frame. The table is remotely operated from inside the control room located 40’ from the range. The turntable is electrically bonded to the surrounding ground plane via steel fingers installed on the edge of the turn table. The steel fingers make constant contact with the ground plane during operation. Adjacent to the turntable is a 7’ x 7’ square and 4’ deep concrete pit used for support equipment if necessary. The pit is equipped with 5 – 4” PVC chases from the pit to the control room that allow for cabling to the EUT if necessary. The underside of the turntable can be accessed from the pit so cables can be supplied to the EUT from the pit. The pit is covered with 2 sheets of 1/4” diamond style re-enforced steel sheets. The sheets are painted to match the perforated steel ground plane; however the underside edges have been masked off to maintain the electrical continuity of the ground plane. All reflecting objects are located outside of the ellipse defined in ANSI C63.4. A diagram of the Open Area Test Site is shown in Figure 2.3-2 below: 10 3 Meters 40 7x7x4 Pit 66 Feet Figure 2.3-2: Open Area Test Site ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 6

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 2.4 Conducted Emissions Test Site Description The AC mains conducted EMI site is located in the main EMC lab. It consists of an 8’ x 8’ solid aluminum horizontal group reference plane (GRP) bonded every 3” to an 8’ X 8’ vertical ground plane. The site is of sufficient size to test table top and floor standing equipment in accordance with section 6.1.4 of ANSI C63.4. A diagram of the room is shown below in figure 2.4-1: Vertical Ground Plane (8’ x 8’) Non-Conductive EUT Table (1m x 1.5m x .8m) .4 Meters .8 Meters Horizontal Ground Plane (8’ x 8’) LISN Figure 2.4-1: AC Mains Conducted EMI Site 3 APPLICABLE STANDARD REFERENCES The following standards were used:  ANSI C63.4-2003: Method of Measurements of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the 9KHz to 40GHz  US Code of Federal Regulations (CFR): Title 47, Part 2, Subpart J: Equipment Authorization Procedures, 2011  US Code of Federal Regulations (CFR): Title 47, Part 15, Subpart C: Radio Frequency Devices, Intentional Radiators, 2011  FCC Public Notice DA 00-705 – Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems, March 30, 2000  Industry Canada Radio Standards Specification: RSS-210 – Low-power License-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment, Issue 8, December 2010  Industry Canada Radio Standards Specification: RSS-GEN – General Requirements and Information for the Certification of Radiocommunication Equipment, Issue 3, December 2010. ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 7

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 4 LIST OF TEST EQUIPMENT The calibration interval of test equipment is annually or the manufacturer’s recommendations. Where the calibration interval deviates from the annual cycle based on the instrument manufacturer’s recommendations, it shall be stated below. Table 4-1: Test Equipment Calibration AssetID Manufacturer Model # Equipment Type Serial # Last Calibration Date Due Date 1 Rohde & Schwarz ESMI - Display Spectrum Analyzers 833771/007 9/23/2010 9/23/2012 2 Rohde & Schwarz ESMI-Receiver Spectrum Analyzers 839587/003 9/23/2010 9/23/2012 22 Hewlett Packard 8449B Amplifiers 3008A00526 9/2/2010 8/30/2011 25 Chase CBL6111 Antennas 1043 9/13/2010 9/13/2012 30 Spectrum Technologies DRH-0118 Antennas 970102 4/27/2011 4/27/2013 73 Agilent 8447D Amplifiers 2727A05624 3/21/2011 3/21/2012 152 EMCO 3825/2 LISN 9111-1905 11/2/2010 11/2/2012 153 EMCO 3825/2 LISN 9411-2268 1/13/2011 1/13/2012 Chamber EMI 167 ACS Cable Set Cable Set 167 1/26/2011 1/26/2012 168 Hewlett Packard 11947A Attenuators 44829 2/4/2011 2/4/2012 267 Agilent N1911A Meters MY45100129 11/2/2010 11/2/2011 268 Agilent N1921A Sensors MY45240184 12/2/2010 12/2/2011 283 Rohde & Schwarz FSP40 Spectrum Analyzers 1000033 8/31/2010 8/31/2011 283 Rohde & Schwarz FSP40 Spectrum Analyzers 1000033 8/26/2011 8/26/2012 SMRE-200W-12.0- 291 Florida RF Cables SMRE Cables None 12/7/2010 12/7/2011 SMR-290AW- 292 Florida RF Cables 480.0-SMR Cables None 4/11/2011 4/11/2012 324 ACS Belden Cables 8214 7/9/2010 7/9/2011 337 Microwave Circuits H1G513G1 Filters 282706 7/16/2010 7/16/2011 339 Aeroflex/Weinschel AS-18 Attenuators 7142 7/1/2010 7/1/2011 340 Aeroflex/Weinschel AS-20 Attenuators 7136 10/5/2010 10/5/2011 340 Aeroflex/Weinschel AS-20 Attenuators 7136 8/29/2011 8/29/2012 SMS-200AW-72.0- 422 Florida RF SMR Cables 805 12/29/2010 12/29/2011 RE40 Agilent E7405A Spectrum Analyzers US39150132 7/20/2010 7/20/2011 Note: All testing was completed from May 18, 2011 to June 1, 2011 with the exception of additional RF conducted measurements on 50kbps data rate (SUN Mode). That testing was started and completed November 10, 2011 using only assets 283 and 340. Calibration dates for those assets are listed to show the equipment was in calibration for all test dates. ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 8

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 5 SUPPORT EQUIPMENT Table 5-1: Support Equipment Item # Type Device Manufacturer Model/Part # Serial # HCMCFS80805 1 Ethernet Hub Hawking Technology HFS8T 00391 2 Power Supply DVE DV-0751AS N/A Table 5-2: Cable Description Cable # Cable Type Length Shield Termination A Power Cable 150 cm No EUT - AC B Ethernet Cable 762 cm No EUT - 1 C Power Cable 150 cm No 1-2 6 EQUIPMENT UNDER TEST SETUP BLOCK DIAGRAM Collector Antenna Cellular Modem Antenna EUT A B C 120V/60Hz 1 2 120V/60Hz Outside Test Environment Figure 6-1: System Block Diagram ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 9

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7 SUMMARY OF TESTS Along with the tabular data shown below, plots were taken of all signals deemed important enough to document. 7.1 Antenna Requirement – FCC: Section 15.203 The antenna is an omni-directional collinear whip antenna with a maximum gain of +5.5 dBi. The antenna coupling is N-Type therefore professional installation is required. 7.2 Power Line Conducted Emissions – FCC: Section 15.207 IC: RSS-Gen 7.2.4 7.2.1 Measurement Procedure ANSI C63.4 sections 6 and 7 were the guiding documents for this evaluation. Conducted emissions were performed from 150kHz to 30MHz with the spectrum analyzer’s resolution bandwidth set to 9kHz and the video bandwidth set to 30kHz. The calculation for the conducted emissions is as follows: Corrected Reading = Analyzer Reading + LISN Loss + Cable Loss Margin = Applicable Limit - Corrected Reading 7.2.2 Measurement Results Results of the test are shown below in and Tables 7.2.2-1 to 7.2.2-2. Table 7.2.2-1: Conducted EMI Results – Pole Mount Total Uncorrected Reading Frequency Correction Corrected Level (dBuV) Limit (dBuV) Margin (dB) (dBuV) Line (MHz) Factor (dB) Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Line 1 0.154 33.85 15.16 10.09 43.94 25.25 65.78 55.78 21.8 30.5 GND 0.183 28.27 8.89 10.08 38.35 18.97 64.35 54.35 26.0 35.4 GND 0.284 17.61 6.45 10.02 27.63 16.47 60.70 50.70 33.1 34.2 GND 7.92 25.17 22.04 10.20 35.37 32.24 60.00 50.00 24.6 17.8 GND 16.17 31.65 32.81 10.50 42.15 43.31 60.00 50.00 17.9 6.7 GND 17.39 24.73 26.89 10.52 35.25 37.41 60.00 50.00 24.8 12.6 GND Line 2 0.181 29.34 7.91 10.08 39.42 17.99 64.44 54.44 25.0 36.4 GND 0.253 21.19 5.86 10.02 31.21 15.88 61.66 51.66 30.5 35.8 GND 0.371 13.69 5.28 10.19 23.88 15.47 58.48 48.48 34.6 33.0 GND 0.423 11.39 2.91 10.00 21.39 12.91 57.39 47.39 36.0 34.5 GND 16.17 33.21 31.74 10.50 43.71 42.24 60.00 50.00 16.3 7.8 GND 17.39 27.06 26.54 10.52 37.58 37.06 60.00 50.00 22.4 12.9 GND Table 7.2.2-2: Conducted EMI Results – Arm Mount Total Uncorrected Reading Frequency Correction Corrected Level (dBuV) Limit (dBuV) Margin (dB) (dBuV) Line (MHz) Factor (dB) Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Quasi-Peak Average Line 1 0.151 32.2 11.87 10.09 42.29 21.96 65.94 55.94 23.7 34.0 GND 0.862 10.94 4.04 10.61 21.55 14.65 56.00 46.00 34.4 31.3 GND 3.922 16.06 7.92 10.12 26.18 18.04 56.00 46.00 29.8 28.0 GND 16.17 31.9 30.78 10.50 42.40 41.28 60.00 50.00 17.6 8.7 GND 17.39 26.19 26.73 10.52 36.71 37.25 60.00 50.00 23.3 12.8 GND 22.88 23.38 22.86 10.97 34.35 33.83 60.00 50.00 25.7 16.2 GND Line 2 0.153 32.46 13.77 10.09 42.55 23.86 65.84 55.84 23.3 32.0 GND 0.521 13.9 8.9 10.00 23.90 18.90 56.00 46.00 32.1 27.1 GND 4.262 17.08 7.1 10.13 27.21 17.23 56.00 46.00 28.8 28.8 GND 16.106 24.33 23.04 10.50 34.83 33.54 60.00 50.00 25.2 16.5 GND 17.388 27.66 28.78 10.52 38.18 39.30 60.00 50.00 21.8 10.7 GND 22.884 26.14 25.54 10.97 37.11 36.51 60.00 50.00 22.9 13.5 GND ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 10

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.3 Peak Output Power - FCC Section 15.247(b)(2) IC: RSS-210 A8.4(1) 7.3.1 Measurement Procedure (Conducted Method) The RF output port of the EUT was directly connected to the input of a power meter. The device employs >50 channels therefore the power is limited to 1 Watt. 7.3.2 Measurement Results Results are shown below in Table 7.3.2-1 below: Table 7.3.2-1: RF Output Power Frequency Level [MHz] [dBm] 902.2 28.48 902.3 28.46 904.0 28.44 915.0 28.15 927.8 27.88 927.9 27.84 ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 11

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.4 Channel Usage Requirements 7.4.1 Carrier Frequency Separation – FCC: Section 15.247(a)(1) IC: RSS-210 A8.1(b) 7.4.1.1 Measurement Procedure The RF output port of the EUT was directly connected to the input of the spectrum analyzer. The span of the spectrum analyzer was set wide enough to capture two adjacent peaks and the RBW and VBW were set to ≥ 1% of the span. Carrier frequency separation was measured for all modes of operation (i.e. wide mode, narrow/full narrow mode and SUN mode) and data presented in section 7.4.1.2 below. 7.4.1.2 Measurement Results The adjacent channel separation was measured to be 100 kHz for narrow (240 channels) and full narrow (256 channels) modes, 300kHz for wide mode (86 channels) and 200kHz for Sun Mode (129 channels). Results are shown below in Figures 7.4.1.2-1 to 7.4.1.2-3. * RBW 30 kHz Delta 1 [T1 ] * RBW 30 kHz Delta 1 [T1 ] VBW 100 kHz 0.01 dB VBW 100 kHz 0.03 dB Ref 40 dBm Att 50 dB SWT 2.5 ms 100.200000000 kHz Ref 40 dBm Att 50 dB SWT 2.5 ms 299.600000000 kHz 40 Offset 20.2 dB Marker 1 [T1 ] 40 Offset 20.2 dB Marker 1 [T1 ] 27.54 dBm 27.94 dBm 1 1 902.299600000 MHz A 1 1 902.298800000 MHz A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 902.35 MHz 30 kHz/ Span 300 kHz Center 902.45 MHz 70 kHz/ Span 700 kHz Date: 25.MAY.2011 15:25:37 Date: 25.MAY.2011 15:31:53 Figure 7.4.1.2-1: Narrow / Full Narrow Modes Figure 7.4.1.2-2: Wide Mode * RBW 30 kHz Delta 1 [T1 ] VBW 100 kHz -0.01 dB Ref 40 dBm Att 50 dB SWT 2.5 ms -200.000000000 kHz 40 Offset 20.2 dB Marker 1 [T1 ] 28.26 dBm 1 1 902.426400000 MHz A 30 1 PK VIEW 20 LVL 10 0 -10 3DB -20 -30 -40 -50 -60 Center 902.3 MHz 40 kHz/ Span 400 kHz Date: 10.NOV.2011 09:20:53 Figure 7.4.1.2-3: SUN Mode ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 12

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.4.2 Number of Hopping Channels – FCC: Section 15.247(a)(1)(i) IC: RSS-210 A8.1(c) The 20dB bandwidth of the device is less than and greater than 250 kHz based on data rate. The device employs > 50 hopping channels under all modes and data rates. Results are shown below in Figures 7.4.2-1 to 7.4.2-11. * RBW 100 kHz Delta 1 [T1 ] * RBW 100 kHz VBW 300 kHz -0.01 dB VBW 300 kHz Ref 40 dBm Att 50 dB SWT 2.5 ms 100.000000000 kHz Ref 40 dBm Att 50 dB SWT 2.5 ms 40 Offset 20.2 dB Marker 1 [T1 ] 40 Offset 20.2 dB 27.76 dBm 11 904.000000000 MHz A A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 900 MHz 1 MHz/ Stop 910 MHz Start 910 MHz 1 MHz/ Stop 920 MHz Date: 25.MAY.2011 15:00:13 Date: 25.MAY.2011 15:03:37 Figure 7.4.2-1: Narrow Mode (240 Channels) Figure 7.4.2-2: Narrow Mode (240 Channels) * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 26.67 dBm VBW 300 kHz 27.62 dBm Ref 40 dBm Att 50 dB SWT 2.5 ms 927.900000000 MHz Ref 40 dBm Att 50 dB SWT 2.5 ms 902.300000000 MHz 40 Offset 20.2 dB 40 Offset 20.2 dB A 1 A 30 1 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 920 MHz 1 MHz/ Stop 930 MHz Start 900 MHz 1 MHz/ Stop 910 MHz Date: 25.MAY.2011 15:07:51 Date: 25.MAY.2011 15:11:17 Figure 7.4.2-3: Narrow Mode (240 Channels) Figure 7.4.2-4: Full Narrow Mode (256 Channels) * RBW 100 kHz * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz VBW 300 kHz 27.24 dBm Ref 40 dBm Att 50 dB SWT 2.5 ms Ref 40 dBm Att 50 dB SWT 2.5 ms 927.800000000 MHz 40 Offset 20.2 dB 40 Offset 20.2 dB A 1 A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 910 MHz 1 MHz/ Stop 920 MHz Start 920 MHz 1 MHz/ Stop 930 MHz Date: 25.MAY.2011 15:14:11 Date: 25.MAY.2011 15:17:01 Figure 7.4.2-5: Full Narrow Mode (256 Channels) Figure 7.4.2-6: Full Narrow Mode (256 Channels) ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 13

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 * RBW 300 kHz Marker 1 [T1 ] * RBW 300 kHz Marker 1 [T1 ] VBW 1 MHz 27.54 dBm VBW 1 MHz 26.56 dBm Ref 40 dBm Att 50 dB SWT 2.5 ms 902.300000000 MHz Ref 40 dBm Att 50 dB SWT 2.5 ms 927.800000000 MHz 40 Offset 20.2 dB 40 Offset 20.2 dB 1 A A 30 30 1 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 900 MHz 1.5 MHz/ Stop 915 MHz Start 915 MHz 1.5 MHz/ Stop 930 MHz Date: 25.MAY.2011 15:18:55 Date: 25.MAY.2011 15:20:36 Figure 7.4.2-7: Wide Mode (86 Channels) Figure 7.4.2-8: Wide Mode (86 Channels) * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz VBW 300 kHz 28.00 dBm VBW 300 kHz Ref 40 dBm Att 50 dB SWT 2.5 ms 902.200000000 MHz Ref 40 dBm Att 50 dB SWT 2.5 ms 40 Offset 20.2 dB 40 Offset 20.2 dB 1 A A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 900 MHz 1 MHz/ Stop 910 MHz Start 910 MHz 1 MHz/ Stop 920 MHz Date: 10.NOV.2011 09:23:05 Date: 10.NOV.2011 09:24:05 Figure 7.4.2-9: SUN Mode (129 Channels) Figure 7.4.2-10: SUN Mode (129 Channels) * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 27.56 dBm Ref 40 dBm Att 50 dB SWT 2.5 ms 927.800000000 MHz 40 Offset 20.2 dB 1 A 30 1 PK VIEW 20 LVL 10 0 -10 3DB -20 -30 -40 -50 -60 Start 920 MHz 1 MHz/ Stop 930 MHz Date: 10.NOV.2011 09:25:03 Figure 7.4.2-11: SUN Mode (129 Channels) ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 14

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.4.3 Channel Dwell Time – FCC: Section 15.247(a)(1)(i) IC: RSS-210 A8.1(c) 7.4.3.1 Measurement Procedure The EUT test mode does not generate a worst case channel dwell time therefore a detailed engineering analysis is provided in the theory of operation. As described in the theory of operation, the maximum channel transmitter dwell time is < 400ms per channel hop with the minimum period of 700ms between hops. Therefore the maximum time of occupancy on any one channel with a 10s period is <400ms for all modes of operation. 7.4.4 20dB / 99% Bandwidth - FCC: Section 15.247(a)(1)(i) IC: RSS-210 A8.1(c) 7.4.4.1 Measurement Procedure The RF output port of the EUT was directly connected to the input of the spectrum analyzer. The spectrum analyzer span was set to 2 to 3 times the estimated bandwidth of the emission. The RBW was to ≥ 1% of the estimated emission bandwidth. The trace was set to max hold with a peak detector active. The Delta function of the analyzer was utilized to determine the 20 dB bandwidth of the emission. The 99% occupied bandwidth was measured with the spectrum analyzer span set to fully display the emission and approximately 20dB below the peak level. The RBW was for 1% to 3% of the approximate emission width. The trace was set to max hold with a sample detector active. The occupied bandwidth measurement function of the analyzer was used for the 99% bandwidth. 7.4.4.2 Measurement Results Results are shown below in Table 7.4.4.2-1 and Figures 7.4.4.2-1 through 7.4.4.2-30. Table 7.4.4.2-1: 20dB / 99% Bandwidth Frequency 20dB Bandwidth 99% Bandwidth Data Rate [MHz] [kHz] [kHz] (kbps) 902.3 23.4 22.8 9.6 902.3 48.0 48.2 19.2 902.3 94.4 88.4 38.4 902.2 105.0 100.5 50.0 902.3 276.0 265.2 115.2 915.0 23.6 23.1 9.6 915.0 47.0 48.2 19.2 915.0 94.4 89.6 38.4 915.0 104.5 100.5 50.0 915.0 277.2 274.8 115.2 927.9 23.5 22.8 9.6 927.9 47.4 51.0 19.2 927.9 95.6 92.4 38.4 927.8 107.0 104.0 50.0 927.8 292.8 303.6 115.2 ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 15

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] VBW 3 kHz 27.26 dBm VBW 3 kHz 26.04 dBm Ref 40 dBm * Att 60 dB SWT 50 ms 902.305100000 MHz Ref 40 dBm * Att 60 dB SWT 100 ms 902.289800000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB ndB [T1] 20.00 dB BW 23.400000000 kHz BW 48.000000000 kHz 1 Temp 1 [T1 ndB] A Temp 1 [T1 ndB] A 30 30 1 7.20 dBm 5.47 dBm 1 PK 1 PK 902.288400000 MHz 902.276200000 MHz VIEW VIEW 20 Temp 2 [T1 ndB] 20 Temp 2 [T1 ndB] LVL LVL 7.24 dBm 6.07 dBm 902.311800000 MHz 902.324200000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 902.3 MHz 5 kHz/ Span 50 kHz Center 902.3 MHz 10 kHz/ Span 100 kHz Date: 25.MAY.2011 09:33:00 Date: 25.MAY.2011 09:48:58 Figure 7.4.4.2-1: 20dB BW Low Channel - 9.6kbps Figure 7.4.4.2-2: 20dB BW Low Channel – 19.2kbps * RBW 3 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] VBW 10 kHz 26.57 dBm VBW 10 kHz 26.74 dBm Ref 40 dBm * Att 60 dB SWT 25 ms 902.280400000 MHz Ref 40 dBm Att 50 dB SWT 30 ms 902.175000000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB ndB [T1] 20.00 dB BW 94.400000000 kHz BW 105.000000000 kHz Temp 1 [T1 ndB] A Temp 1 [T1 ndB] A 30 1 30 1 6.63 dBm 7.01 dBm 1 PK 1 PK 902.253200000 MHz 902.148000000 MHz VIEW VIEW 20 Temp 2 [T1 ndB] 20 Temp 2 [T1 ndB] LVL LVL 6.37 dBm 7.05 dBm 902.347600000 MHz 902.253000000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 902.3 MHz 20 kHz/ Span 200 kHz Center 902.2 MHz 25 kHz/ Span 250 kHz Date: 25.MAY.2011 10:43:40 Date: 10.NOV.2011 09:04:17 Figure 7.4.4.2-3: 20dB BW Low Channel – 38.4kbps Figure 7.4.4.2-4: 20dB BW Low Channel – 50.0kbps * RBW 10 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] VBW 30 kHz 27.11 dBm VBW 3 kHz 27.24 dBm Ref 40 dBm * Att 60 dB SWT 10 ms 902.241200000 MHz Ref 40 dBm * Att 60 dB SWT 50 ms 914.995600000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB ndB [T1] 20.00 dB BW 276.000000000 kHz BW 23.600000000 kHz Temp 1 [T1 ndB] A 1 Temp 1 [T1 ndB] A 30 1 30 7.12 dBm 7.08 dBm 1 PK 1 PK 902.162000000 MHz 914.988600000 MHz VIEW VIEW 20 Temp 2 [T1 ndB] 20 Temp 2 [T1 ndB] LVL LVL 6.60 dBm 7.09 dBm 902.438000000 MHz 915.012200000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 902.3 MHz 60 kHz/ Span 600 kHz Center 915 MHz 5 kHz/ Span 50 kHz Date: 25.MAY.2011 11:30:20 Date: 25.MAY.2011 09:37:00 Figure 7.4.4.2-5: 20dB BW Low Channel – 115.2kbps Figure 7.4.4.2-6: 20dB BW Mid Channel - 9.6kbps ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 16

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 * RBW 1 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] VBW 3 kHz 26.36 dBm VBW 10 kHz 26.65 dBm Ref 40 dBm * Att 60 dB SWT 100 ms 914.989800000 MHz Ref 40 dBm * Att 60 dB SWT 25 ms 914.980800000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB ndB [T1] 20.00 dB BW 47.000000000 kHz BW 94.400000000 kHz Temp 1 [T1 ndB] A Temp 1 [T1 ndB] A 30 1 30 1 6.53 dBm 6.84 dBm 1 PK 1 PK 914.976800000 MHz 914.953600000 MHz VIEW VIEW 20 Temp 2 [T1 ndB] 20 Temp 2 [T1 ndB] LVL LVL 6.34 dBm 6.91 dBm 915.023800000 MHz 915.048000000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 915 MHz 10 kHz/ Span 100 kHz Center 915 MHz 20 kHz/ Span 200 kHz Date: 25.MAY.2011 09:53:05 Date: 25.MAY.2011 10:46:06 Figure 7.4.4.2-7: 20dB BW Mid Channel – 19.2kbps Figure 7.4.4.2-8: 20dB BW Mid Channel – 38.4kbps * RBW 3 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] VBW 10 kHz 26.58 dBm VBW 30 kHz 26.66 dBm Ref 40 dBm Att 50 dB SWT 30 ms 914.975500000 MHz Ref 40 dBm * Att 60 dB SWT 10 ms 914.941200000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB ndB [T1] 20.00 dB BW 104.500000000 kHz BW 277.200000000 kHz Temp 1 [T1 ndB] A Temp 1 [T1 ndB] A 30 1 30 1 6.47 dBm 6.88 dBm 1 PK 1 PK 914.948000000 MHz 914.862000000 MHz VIEW VIEW 20 Temp 2 [T1 ndB] 20 Temp 2 [T1 ndB] LVL LVL 6.90 dBm 6.71 dBm 915.052500000 MHz 915.139200000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 915 MHz 25 kHz/ Span 250 kHz Center 915 MHz 60 kHz/ Span 600 kHz Date: 10.NOV.2011 09:07:03 Date: 25.MAY.2011 11:33:49 Figure 7.4.4.2-9: 20dB BW Mid Channel – 50.0kbps Figure 7.4.4.2-10: 20dB BW Mid Channel – 115.2kbps * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] VBW 3 kHz 26.92 dBm VBW 3 kHz 25.36 dBm Ref 40 dBm * Att 60 dB SWT 50 ms 927.895400000 MHz Ref 40 dBm * Att 60 dB SWT 100 ms 927.889600000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB ndB [T1] 20.00 dB BW 23.500000000 kHz BW 47.400000000 kHz Temp 1 [T1 ndB] A Temp 1 [T1 ndB] A 30 1 30 1 7.02 dBm 5.43 dBm 1 PK 1 PK 927.888600000 MHz 927.876600000 MHz VIEW VIEW 20 Temp 2 [T1 ndB] 20 Temp 2 [T1 ndB] LVL LVL 6.83 dBm 5.03 dBm 927.912100000 MHz 927.924000000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 927.9 MHz 5 kHz/ Span 50 kHz Center 927.9 MHz 10 kHz/ Span 100 kHz Date: 25.MAY.2011 09:38:46 Date: 25.MAY.2011 10:27:09 Figure 7.4.4.2-11: 20dB BW High Channel - 9.6kbps Figure 7.4.4.2-12: 20dB BW High Channel – 19.2kbps ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 17

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 * RBW 3 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] VBW 10 kHz 25.95 dBm VBW 10 kHz 25.67 dBm Ref 40 dBm * Att 60 dB SWT 25 ms 927.920400000 MHz Ref 40 dBm Att 50 dB SWT 30 ms 927.826000000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB ndB [T1] 20.00 dB BW 95.600000000 kHz BW 107.000000000 kHz Temp 1 [T1 ndB] A Temp 1 [T1 ndB] A 30 1 30 1 6.46 dBm 5.65 dBm 1 PK 1 PK 927.852800000 MHz 927.745500000 MHz VIEW VIEW 20 Temp 2 [T1 ndB] 20 Temp 2 [T1 ndB] LVL LVL 6.09 dBm 5.88 dBm 927.948400000 MHz 927.852500000 MHz 10 T1 T2 10 T2 T1 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 927.9 MHz 20 kHz/ Span 200 kHz Center 927.8 MHz 25 kHz/ Span 250 kHz Date: 25.MAY.2011 10:51:20 Date: 10.NOV.2011 09:07:49 Figure 7.4.4.2-13: 20dB BW High Channel – 38.4kbps Figure 7.4.4.2-14: 20dB BW High Channel – 50.0kbps * RBW 10 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] VBW 30 kHz 26.11 dBm VBW 3 kHz 26.43 dBm Ref 40 dBm * Att 60 dB SWT 10 ms 927.741200000 MHz Ref 40 dBm * Att 60 dB SWT 50 ms 902.304900000 MHz 40 Offset 20.2 dB ndB [T1] 20.00 dB 40 Offset 20.2 dB OBW 22.800000000 kHz BW 292.800000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 ndB] A 7.84 dBm A 30 1 30 1 6.16 dBm 902.288700000 MHz 1 PK 1 SA * 927.657200000 MHz Temp 2 [T1 OBW] VIEW VIEW 20 Temp 2 [T1 ndB] 20 8.80 dBm LVL LVL 6.46 dBm 902.311500000 MHz 927.950000000 MHz T1 T2 10 T1 T2 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 927.8 MHz 60 kHz/ Span 600 kHz Center 902.3 MHz 5 kHz/ Span 50 kHz Date: 25.MAY.2011 11:35:18 Date: 25.MAY.2011 09:33:55 Figure 7.4.4.2-15: 20dB BW High Channel – 115.2kbps Figure 7.4.4.2-16: 99% BW Low Channel - 9.6kbps * RBW 1 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] VBW 3 kHz 25.06 dBm VBW 10 kHz 26.01 dBm Ref 40 dBm * Att 60 dB SWT 100 ms 902.310000000 MHz Ref 40 dBm * Att 60 dB SWT 25 ms 902.280800000 MHz 40 Offset 20.2 dB OBW 48.200000000 kHz 40 Offset 20.2 dB OBW 88.400000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 5.34 dBm A 10.04 dBm A 30 30 1 1 902.276000000 MHz 902.256000000 MHz 1 SA * 1 SA * Temp 2 [T1 OBW] Temp 2 [T1 OBW] VIEW VIEW 20 4.11 dBm LVL 20 9.54 dBm LVL 902.324200000 MHz 902.344400000 MHz T1 T2 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 902.3 MHz 10 kHz/ Span 100 kHz Center 902.3 MHz 20 kHz/ Span 200 kHz Date: 25.MAY.2011 09:50:32 Date: 25.MAY.2011 10:44:50 Figure 7.4.4.2-17: 99% BW Low Channel – 19.2kbps Figure 7.4.4.2-18: 99% BW Low Channel – 38.4kbps ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 18

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 * RBW 3 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] VBW 10 kHz 26.21 dBm VBW 30 kHz 26.89 dBm Ref 40 dBm Att 40 dB SWT 30 ms 902.226000000 MHz Ref 40 dBm * Att 60 dB SWT 10 ms 902.240000000 MHz 40 Offset 20.2 dB OBW100.500000000 kHz 40 Offset 20.2 dB OBW265.200000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 11.28 dBm A 7.93 dBm A 30 1 30 1 902.150000000 MHz 902.165600000 MHz 1 SA * 1 SA * Temp 2 [T1 OBW] Temp 2 [T1 OBW] VIEW VIEW 20 10.60 dBm LVL 20 7.73 dBm LVL 902.250500000 MHz 902.430800000 MHz T1 T2 10 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 902.2 MHz 25 kHz/ Span 250 kHz Center 902.3 MHz 60 kHz/ Span 600 kHz Date: 10.NOV.2011 09:05:48 Date: 25.MAY.2011 11:31:12 Figure 7.4.4.2-19: 99% BW Low Channel – 50.0kbps Figure 7.4.4.2-20: 99% BW Low Channel – 115.2kbps * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] VBW 3 kHz 26.44 dBm VBW 3 kHz 25.13 dBm Ref 40 dBm * Att 60 dB SWT 50 ms 914.995700000 MHz Ref 40 dBm * Att 60 dB SWT 100 ms 914.990200000 MHz 40 Offset 20.2 dB OBW 23.100000000 kHz 40 Offset 20.2 dB OBW 48.200000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 8.09 dBm A 4.83 dBm A 30 1 30 1 914.988700000 MHz 914.976200000 MHz 1 SA * 1 SA * Temp 2 [T1 OBW] Temp 2 [T1 OBW] VIEW VIEW 20 7.93 dBm LVL 20 5.32 dBm LVL 915.011800000 MHz 915.024400000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 915 MHz 5 kHz/ Span 50 kHz Center 915 MHz 10 kHz/ Span 100 kHz Date: 25.MAY.2011 09:35:25 Date: 25.MAY.2011 09:55:11 Figure 7.4.4.2-21: 99% BW Mid Channel - 9.6kbps Figure 7.4.4.2-22: 99% BW Mid Channel – 19.2kbps * RBW 3 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] VBW 10 kHz 25.93 dBm VBW 10 kHz 25.97 dBm Ref 40 dBm * Att 60 dB SWT 25 ms 915.020000000 MHz Ref 40 dBm Att 40 dB SWT 30 ms 914.975000000 MHz 40 Offset 20.2 dB OBW 89.600000000 kHz 40 Offset 20.2 dB OBW100.500000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 9.32 dBm A 9.61 dBm A 30 1 30 1 914.955600000 MHz 914.950000000 MHz 1 SA * 1 SA * Temp 2 [T1 OBW] Temp 2 [T1 OBW] VIEW VIEW 20 8.59 dBm LVL 20 10.32 dBm LVL 915.045200000 MHz 915.050500000 MHz T1 T1 T2 T2 10 10 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 915 MHz 20 kHz/ Span 200 kHz Center 915 MHz 25 kHz/ Span 250 kHz Date: 25.MAY.2011 10:47:16 Date: 10.NOV.2011 09:06:24 Figure 7.4.4.2-23: 99% BW Mid Channel – 38.4kbps Figure 7.4.4.2-24: 99% BW Mid Channel – 50.0kbps ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 19

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 * RBW 10 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] VBW 30 kHz 26.70 dBm VBW 3 kHz 26.34 dBm Ref 40 dBm * Att 60 dB SWT 10 ms 914.941200000 MHz Ref 40 dBm * Att 60 dB SWT 50 ms 927.895400000 MHz 40 Offset 20.2 dB OBW274.800000000 kHz 40 Offset 20.2 dB OBW 22.800000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 7.54 dBm A 7.65 dBm A 30 1 30 1 914.860800000 MHz 927.888800000 MHz 1 SA * 1 SA * Temp 2 [T1 OBW] Temp 2 [T1 OBW] VIEW VIEW 20 7.47 dBm LVL 20 7.51 dBm LVL 915.135600000 MHz 927.911600000 MHz 10 T1 T2 10 T1 T2 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 915 MHz 60 kHz/ Span 600 kHz Center 927.9 MHz 5 kHz/ Span 50 kHz Date: 25.MAY.2011 11:32:45 Date: 25.MAY.2011 09:42:23 Figure 7.4.4.2-25: 99% BW Mid Channel – 115.2kbps Figure 7.4.4.2-26: 99% BW High Channel - 9.6kbps * RBW 1 kHz Marker 1 [T1 ] * RBW 3 kHz Marker 1 [T1 ] VBW 3 kHz 24.12 dBm VBW 10 kHz 25.66 dBm Ref 40 dBm * Att 60 dB SWT 100 ms 927.910400000 MHz Ref 40 dBm * Att 60 dB SWT 25 ms 927.881200000 MHz 40 Offset 20.2 dB OBW 51.000000000 kHz 40 Offset 20.2 dB OBW 92.400000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] -1.44 dBm A 7.42 dBm A 30 30 1 1 927.874400000 MHz 927.854800000 MHz 1 SA * 1 SA * Temp 2 [T1 OBW] Temp 2 [T1 OBW] VIEW VIEW 20 0.45 dBm LVL 20 6.41 dBm LVL 927.925400000 MHz 927.947200000 MHz 10 10 T1 T2 T2 T1 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 927.9 MHz 10 kHz/ Span 100 kHz Center 927.9 MHz 20 kHz/ Span 200 kHz Date: 25.MAY.2011 10:24:41 Date: 25.MAY.2011 10:52:25 Figure 7.4.4.2-27: 99% BW High Channel – 19.2kbps Figure 7.4.4.2-28: 99% BW High Channel – 38.4kbps * RBW 3 kHz Marker 1 [T1 ] * RBW 10 kHz Marker 1 [T1 ] VBW 10 kHz 25.41 dBm VBW 30 kHz 25.49 dBm Ref 40 dBm Att 40 dB SWT 30 ms 927.825500000 MHz Ref 40 dBm * Att 60 dB SWT 10 ms 927.743600000 MHz 40 Offset 20.2 dB OBW104.000000000 kHz 40 Offset 20.2 dB OBW303.600000000 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 7.38 dBm A 3.56 dBm A 30 30 1 1 927.748000000 MHz 927.641600000 MHz 1 SA * 1 SA * Temp 2 [T1 OBW] Temp 2 [T1 OBW] VIEW VIEW 20 6.92 dBm LVL 20 6.95 dBm LVL 927.852000000 MHz 927.945200000 MHz 10 T1 T2 10 T2 T1 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Center 927.8 MHz 25 kHz/ Span 250 kHz Center 927.8 MHz 60 kHz/ Span 600 kHz Date: 10.NOV.2011 09:08:34 Date: 25.MAY.2011 11:37:15 Figure 7.4.4.2-29: 99% BW High Channel – 50.0kbps Figure 7.4.4.2-30: 99% BW High Channel – 115.2kbps ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 20

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.5 Band-Edge Compliance and Spurious Emissions-FCC 15.247(d) IC: RSS-210 A8.5 7.5.1 Band-Edge Compliance of RF Conducted Emissions 7.5.1.1 Measurement Procedure The RF output port of the EUT was directly connected to the input of the spectrum analyzer. The EUT was investigated at the lowest and highest channel available to determine band-edge compliance. For each measurement the spectrum analyzer’s RBW was set to 30 kHz, which is ≥ 1% of the span, and the VBW was set to 100kHz. Band-edge was evaluated for all combinations of operating modes and data rates with worst case data provided. Worst case reported utilized 38.4kbps in Narrow Mode, 50.0kbps in Sun Mode, and 115.2kbps in Wide Mode. 7.5.1.2 Measurement Results Results are shown in the figures 7.5.1.2-1 to 7.5.1.2-8 below. * RBW 30 kHz Delta 1 [T1 ] * RBW 30 kHz Delta 1 [T1 ] VBW 100 kHz 33.73 dB VBW 100 kHz 39.66 dB Ref 40 dBm Att 50 dB SWT 5 ms 256.000000000 kHz Ref 40 dBm Att 50 dB SWT 5 ms 262.000000000 kHz 40 Offset 20.2 dB Marker 1 [T1 ] 40 Offset 20.2 dB Marker 1 [T1 ] -5.75 dBm -11.29 dBm 1901.988000000 MHz A 1 901.916000000 MHz A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 0 0 1 1 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 900 MHz 300 kHz/ Stop 903 MHz Start 900 MHz 300 kHz/ Stop 903 MHz Date: 25.MAY.2011 13:51:14 Date: 10.NOV.2011 09:18:50 Figure 7.5.1.2-1: Lower Band-edge – Wide Mode Figure 7.5.1.2-2: Lower Band-edge – SUN Mode * RBW 30 kHz Delta 1 [T1 ] * RBW 30 kHz Delta 1 [T1 ] VBW 100 kHz 27.16 dB VBW 100 kHz 23.93 dB Ref 40 dBm Att 50 dB SWT 5 ms -124.000000000 kHz Ref 40 dBm Att 50 dB SWT 5 ms -262.000000000 kHz 40 Offset 20.2 dB Marker 1 [T1 ] 40 Offset 20.2 dB Marker 1 [T1 ] 0.22 dBm 3.37 dBm 1 928.000000000 MHz A 1 928.000000000 MHz A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 1 1 0 0 -10 -10 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 927 MHz 300 kHz/ Stop 930 MHz Start 927 MHz 300 kHz/ Stop 930 MHz Date: 25.MAY.2011 13:52:32 Date: 25.MAY.2011 13:53:50 Figure 7.5.1.2-3: Upper Band-edge - Narrow Mode Figure 7.5.1.2-4: Upper Band-edge - Wide Mode ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 21

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 HOPPING MODE: * RBW 30 kHz Delta 1 [T1 ] * RBW 30 kHz Delta 1 [T1 ] VBW 100 kHz 35.26 dB VBW 100 kHz 40.18 dB Ref 40 dBm Att 50 dB SWT 5 ms 856.000000000 kHz Ref 40 dBm Att 50 dB SWT 5 ms 208.000000000 kHz 40 Offset 20.2 dB Marker 1 [T1 ] 40 Offset 20.2 dB Marker 1 [T1 ] -7.47 dBm -11.86 dBm 901.988000000 1MHz A 1 901.970000000 MHz A 30 30 1 PK 1 PK VIEW MAXH 20 20 LVL LVL 10 10 0 0 1 -10 -10 1 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 900 MHz 300 kHz/ Stop 903 MHz Start 900 MHz 300 kHz/ Stop 903 MHz Date: 25.MAY.2011 14:46:55 Date: 10.NOV.2011 09:18:21 Figure 7.5.1.2-5: Lower Band-edge – Wide Mode Figure 7.5.1.2-6: Lower Band-edge – SUN Mode * RBW 30 kHz Delta 1 [T1 ] * RBW 30 kHz Delta 1 [T1 ] VBW 100 kHz 43.15 dB VBW 100 kHz 24.84 dB Ref 40 dBm Att 50 dB SWT 5 ms -544.000000000 kHz Ref 40 dBm Att 50 dB SWT 5 ms -742.000000000 kHz 40 Offset 20.2 dB Marker 1 [T1 ] 40 Offset 20.2 dB Marker 1 [T1 ] -16.02 dBm 1.99 dBm 928.024000000 MHz A 928.000000000 MHz A 30 1 30 1 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 1 0 0 -10 -10 1 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 927 MHz 300 kHz/ Stop 930 MHz Start 927 MHz 300 kHz/ Stop 930 MHz Date: 25.MAY.2011 14:32:25 Date: 25.MAY.2011 14:48:50 Figure 7.5.1.2-7: Upper Band-edge – Narrow Mode Figure 7.5.1.2-8: Upper Band-edge –Wide Mode ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 22

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.5.2 RF Conducted Spurious Emissions 7.5.2.1 Measurement Procedure The RF output port of the EUT was directly connected to the input of the spectrum analyzer. The EUT was investigated for conducted spurious emissions from 30MHz to 10GHz, 10 times the highest fundamental frequency. Measurements were made at the low, center and high channels of the EUT. For each measurement, the spectrum analyzer’s RBW was set to 100kHz. A peak detector function was used with the trace set to max hold. RF conducted spurious emissions were evaluated for all combinations of operating modes and data rates with worst case data provided. Worst case report utilized 9.6kbps in Full Narrow Mode. 7.5.2.2 Measurement Results Results are shown below in Figures 7.5.2.2-1 to 7.5.2.2-6: * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 27.81 dBm VBW 300 kHz -13.95 dBm Ref 40 dBm Att 50 dB SWT 100 ms 903.000000000 MHz Ref 40 dBm Att 50 dB SWT 900 ms 7.426000000 GHz 40 Offset 20.2 dB 40 Offset 20.2 dB 1 A A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 D1 7.81 dBm D1 7.81 dBm 0 0 -10 -10 1 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 900 MHz/ Stop 10 GHz Date: 25.MAY.2011 13:16:00 Date: 25.MAY.2011 13:16:31 Figure 7.5.2.2-1: 30 MHz – 1 GHz – Low Channel Figure 7.5.2.2-2: 1 GHz – 10 GHz – Low Channel * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 27.65 dBm VBW 300 kHz -13.68 dBm Ref 40 dBm Att 50 dB SWT 100 ms 916.580000000 MHz Ref 40 dBm Att 50 dB SWT 900 ms 7.210000000 GHz 40 Offset 20.2 dB 40 Offset 20.2 dB 1 A A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 D1 7.65 dBm D1 7.65 dBm 0 0 -10 -10 1 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 900 MHz/ Stop 10 GHz Date: 25.MAY.2011 13:33:47 Date: 25.MAY.2011 13:34:36 Figure 7.5.2.2-3: 30 MHz – 1 GHz –Mid Channel Figure 7.5.2.2-4: 1 GHz – 10 GHz – Mid Channel ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 23

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 * RBW 100 kHz Marker 1 [T1 ] * RBW 100 kHz Marker 1 [T1 ] VBW 300 kHz 27.33 dBm VBW 300 kHz -13.18 dBm Ref 40 dBm Att 50 dB SWT 100 ms 930.160000000 MHz Ref 40 dBm Att 50 dB SWT 900 ms 7.102000000 GHz 40 Offset 20.2 dB 40 Offset 20.2 dB 1 A A 30 30 1 PK 1 PK VIEW VIEW 20 20 LVL LVL 10 10 D1 7.33 dBm D1 7.33 dBm 0 0 -10 -10 1 3DB 3DB -20 -20 -30 -30 -40 -40 -50 -50 -60 -60 Start 30 MHz 97 MHz/ Stop 1 GHz Start 1 GHz 900 MHz/ Stop 10 GHz Date: 25.MAY.2011 13:37:26 Date: 25.MAY.2011 13:38:06 Figure 7.5.2.2-5: 30 MHz – 1 GHz – High Channel Figure 7.5.2.2-6: 1 GHz – 10 GHz –High Channel 7.5.3 Radiated Spurious Emissions - FCC Section 15.205 IC: RSS-210 2.6 7.5.3.1 Measurement Procedure Radiated emissions tests were made over the frequency range of 30MHz to 10GHz, 10 times the highest fundamental frequency. The EUT was rotated through 360° and the receive antenna height was varied from 1m to 4m so that the maximum radiated emissions level would be detected. For frequencies below 1000MHz, quasi-peak measurements were made using a resolution bandwidth RBW of 120 kHz and a video bandwidth VBW of 300 kHz. For frequencies above 1000MHz, peak and average measurements were made with RBW and VBW of 1 MHz and 3MHz respectively. The EUT was caused to generate a continuous carrier signal on the hopping channel. Radiated spurious emissions were evaluated for all combinations of operating modes and data rates with worst case data provided. Worst case report utilized 9.6kbps in Full Narrow Mode. The EUT was evaluated with both arm mount and pole mount hardware configurations. ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 24

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.5.3.2 Measurement Results Radiated spurious emissions found in the band of 30MHz to 10GHz are reported in the Tables 7.5.3.2-1 to 7.5.3.2-2 below. Table 7.5.3.2-1: Radiated Spurious Emissions Tabulated Data – Arm Mount Level Antenna Antenna Turntable Correction Corrected Level Limit Margin Frequency (dBuV) Polarity Height Position Factors (dBuV/m) (dBuV/m) (dB) (MHz) pk Qpk/Avg (H/V) (cm) (o) (dB) pk Qpk/Avg pk Qpk/Avg pk Qpk/Avg Low Channel 2706.9 42.36 35.36 H 110 340 2.15 44.51 37.51 74.0 54.0 29.5 16.5 2706.9 46.14 41.28 V 100 255 2.15 48.29 43.43 74.0 54.0 25.7 10.6 3609.2 44.54 38.03 H 110 73 5.50 50.04 43.53 74.0 54.0 24.0 10.5 3609.2 45.19 39.55 V 104 198 5.50 50.69 45.05 74.0 54.0 23.3 8.9 Middle Channel 2745 45.19 40.41 H 110 175 2.30 47.49 42.71 74.0 54.0 26.5 11.3 2745 47.53 43.94 V 133 158 2.30 49.83 46.24 74.0 54.0 24.2 7.8 3660 45.37 39.14 H 110 80 5.68 51.05 44.82 74.0 54.0 22.9 9.2 3660 45.02 39.47 V 133 17 5.68 50.70 45.15 74.0 54.0 23.3 8.8 High Channel 2783.7 43.14 36.48 V 100 116 2.45 45.59 38.93 74.0 54.0 28.4 15.1 3711.6 43.16 36.30 H 112 200 5.86 49.02 42.16 74.0 54.0 25.0 11.8 3711.6 43.10 36.60 V 104 83 5.86 48.96 42.46 74.0 54.0 25.0 11.5 * Note: All emissions not reported were attenuated below the noise floor of the receiver. Table 7.5.3.2-2: Radiated Spurious Emissions Tabulated Data – Pole Mount Level Antenna Antenna Turntable Correction Corrected Level Limit Margin Frequency (dBuV) Polarity Height Position Factors (dBuV/m) (dBuV/m) (dB) (MHz) pk Qpk/Avg (H/V) (cm) (o) (dB) pk Qpk/Avg pk Qpk/Avg pk Qpk/Avg Low Channel 2706.9 43.13 36.53 H 175 198 2.15 45.28 38.68 74.0 54.0 28.7 15.3 2706.9 45.32 39.85 V 127 272 2.15 47.47 42.00 74.0 54.0 26.5 12.0 3609.2 45.14 40.13 H 110 78 5.50 50.64 45.63 74.0 54.0 23.4 8.4 3609.2 48.16 43.92 V 131 271 5.50 53.66 49.42 74.0 54.0 20.3 4.6 Middle Channel 2745 42.38 35.13 H 110 29 2.30 44.68 37.43 74.0 54.0 29.3 16.6 2745 44.13 38.20 V 138 295 2.30 46.43 40.50 74.0 54.0 27.6 13.5 3660 45.19 39.35 H 112 204 5.68 50.87 45.03 74.0 54.0 23.1 9.0 3660 45.98 40.59 V 134 258 5.68 51.66 46.27 74.0 54.0 22.3 7.7 High Channel 2783.7 43.29 36.50 H 127 353 2.45 45.74 38.95 74.0 54.0 28.3 15.1 2783.7 43.11 37.11 V 100 5 2.45 45.56 39.56 74.0 54.0 28.4 14.4 3711.6 45.13 36.86 H 111 244 5.86 50.99 42.72 74.0 54.0 23.0 11.3 3711.6 44.32 38.56 V 177 0 5.86 50.18 44.42 74.0 54.0 23.8 9.6 * Note: All emissions not reported were attenuated below the noise floor of the receiver. ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 25

Models: Collector C6400, Collector C6420, Collector C6430 FCC ID: R7PNG6R1S1 IC: 5294A-NG6R1S1 7.5.3.3 Sample Calculation: RC = RU + CFT Where: CFT = Total Correction Factor (AF+CA+AG)-DC (Average Measurements Only) RU = Uncorrected Reading RC = Corrected Level AF = Antenna Factor CA = Cable Attenuation AG = Amplifier Gain DC = Duty Cycle Correction Factor Example Calculation: Peak Corrected Level: 42.36 + 2.15 = 44.51dBuV/m Margin: 74dBuV/m – 44.51dBuV/m = 29.5dB Example Calculation: Average Corrected Level: 35.36 + 2.15 – 0 = 37.51dBuV Margin: 54dBuV – 37.51dBuV = 16.5dB 8 CONCLUSION In the opinion of ACS, Inc. Collector C6400, Collector C6420 and Collector C6430, manufactured by Cellnet Technology Inc. meets the requirements of FCC Part 15 subpart C and Industry Canada’s Radio Standards Specification RSS-210. END REPORT ACS Report: 11-0082.W06.11.B Advanced Compliance Solutions Page 26


Document Created: 2011-11-10 10:39:15
Document Modified: 2011-11-10 10:39:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC