rf exposure

FCC ID: R7PIWRP1

RF Exposure Info

Download: PDF
FCCID_763368

FCC Part 15.247 Transmitter Certification Frequency Hopping Spread Spectrum Transmitter Test Report FCC ID: R7PIWRP1 FCC Rule Part: 15.247 ACS Report Number: 06-0394-15C Manufacturer: Cellnet Technology, Inc. Model: Utilinet PCMCIA Radio RF Exposure Information 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Model: Utilinet PCMCIA Radio FCC ID: R7PIWRP1 General Information: Applicant: Cellnet ACS Project: 06-0394 FCC ID: R7PIWRP1 Device Category: Portable Environment: General Population/Uncontrolled Exposure Technical Information: Antenna Type: PCB Antenna Gain: -1 dBi Transmitter Conducted Power: 12.39dBm Maximum System EIRP: 11.39dBm Operating Configuration: Portable Exposure Conditions: NA (Meets Lower threshold of the July02 TCB Exclusion List) MPE Calculation The Power Density (mW/cm2) is calculated as follows: PG S= 4πR 2 Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) MPE Calculator for Mobile Equipment Limits for General Population/Uncontrolled Exposure* Transmit Radio Power Radio Antenna Antenna Distance Power Density Frequency Power Density Limit Power Gain Gain (mW (cm) (mW/cm^2) (MHz) (dBm) (mW/Cm2) (mW) (dBi) eq.) 902.1 12.39 0.60 17.34 -1 0.794 1.36 0.593 Installation Guidelines The installation manual must contain text advising how to install the equipment to maintain compliance with the FCC RF exposure requirements. 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598


Document Created: 2007-02-23 09:32:50
Document Modified: 2007-02-23 09:32:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC