Modular Approval Letter

FCC ID: R7PEC6R2S3

Cover Letter(s)

Download: PDF
FCCID_2660754

To: File From: Richard Timko Subject: GPR2, FCC ID: R7PEC6R2S3 Modular Approval Request June 18, 2015 Scope 47CFR 15.212 communicates requirements for products requesting modular approval. In particular, eight requirements are enumerated along with a request that each of the eight be explained for any product requesting such approval. It is the purpose of this document to respond to those eight requirements in regard to the Landis+Gyr product: GPR2. Modular Approval Requirements 1.1 RF Shielding The GPR2 module is self-shielding and is not dependent on any component or characteristic of the device into which it is embedded. Shielding is accomplished through a combination of metallic self-shielding components, copper planes, guards, and vias in the PCB. The result is a design that has been proven to be neither sensitive to outside influence nor capable of introducing interference into outside components. 1.2 Buffered Modulation / Data Inputs The GPR2 module does not have external modulation or data inputs. Rather, the RF sections are driven by an on-board microprocessor which directly controls the RF data lines and operates so as to not allow excessive modulation. 1.3 Power Supply Regulation The GPR2 module uses linear, low-dropout regulators to provide all the electronics with a supply that is fixed, even when the input voltage is varied. 1.4 Antenna Requirement The GPR2 module utilizes an internal, integrated, inverted-F antenna. 1.5 Stand-Alone Testing All testing on the GPR2 module was conducted standalone. No shields or enclosures were used, other than those fully integrated into the modules themselves. No ferrites were used on data or power lines during testing. These devices are DC powered, and exceed applicable conducted emission requirements. 1.6 Labeling As indicated, each GPR2 module will have its own FCC ID label. In addition, devices into which they are placed will have labels indicating that this module is contained within. Exact text will be as specified in 47CFR 15.212. 1.7 Specific Rules and Operating Requirements The GPR2 module complies with all pertinent rules for its section. 1.8 RF Exposure Requirements The GPR2 module complies with all exposure requirements. As a component used in the Utility industry, this product is not intended for use near human operators. 2.0 In Reference to 15.212(b) The GPR2 module is always professionally installed and is not sold to the general public. This module undergoes continuous, rigorous testing to ensure that full compliance is always maintained. Sincerely, Title: Quality Engineer 30000 Mill Creek Avenue, Suite 100 | Alpharetta, GA 30022 Tel: +1 678 258 1637 | Fax: +1 678 258 1681


Document Created: 2015-06-18 18:14:39
Document Modified: 2015-06-18 18:14:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC