RF Exposure

FCC ID: R7PCGR1S2

RF Exposure Info

Download: PDF
FCCID_2343648

Certification Exhibit FCC ID: R7PCGR1S2 FCC Rule Part: 15.247 ACS Project Number: 12-0230 Manufacturer: Landis+Gyr Technology, Inc. Model: BLT5 RF Exposure 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Model: BLT5 FCC ID: R7PCGR1S2 General Information: Applicant: Landis+Gyr Technology, Inc. Device Category: Mobile Environment: General Population/Uncontrolled Exposure Technical Information: Antenna Type: Omni-directional feed point Antenna Gain: 3dBi Maximum Transmitter Conducted Power: 25.43 dBm, 349.14 mW Maximum System EIRP: 28.43 dBm, 696.63 mW Exposure Conditions: Greater than 20 centimeters MPE Calculation The Power Density (mW/cm2) is calculated as follows: PG S= 4R 2 Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) MPE Calculator for Mobile Equipment Limits for General Population/Uncontrolled Exposure* Transmit Radio Power Radio Antenna Antenna Power Distance Frequency Power Density Limit Power Gain Gain Density (cm) (MHz) (dBm) (mW/Cm2) (mW) (dBi) (mW eq.) (mW/cm^2) 917.58 25.43 0.61 349.14 3 1.995 20 0.139 Installation Guidelines The installation manual should contain text similar to the following advising how to install the equipment to maintain compliance with the FCC RF exposure requirements: RF Exposure In accordance with FCC requirements of human exposure to radio frequency fields, the radiating element shall be installed such that a minimum separation distance of 20 centimeters will be maintained. Conclusion This device complies with the MPE requirements by providing adequate separation between the device, any radiating structure and the general population. ACS Project: 12-0230 Advanced Compliance Solutions Page 2


Document Created: 2014-07-28 08:46:32
Document Modified: 2014-07-28 08:46:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC