TEST REPORT

FCC ID: R6U6024-49M

Test Report

Download: PDF
FCCID_696638

Test Report of FCC Part 15 C for FCC Certificate On Behalf of YINRUN PLASTIC CRAFTS CO.,LTD Product description: R/C Airplane Model No.: 6024 FCC ID: R6U6024-49M Prepared for: YINRUN PLASTIC CRAFTS CO.,LTD Yinrun Ind, Garden, Laimei, Zone,Chenghai,Shantou City, Guangdong, China Prepared by: Bontek Compliance Laboratory Ltd Rm 802~804, 8/F, Jinmin Bld., Zizhu 6th Rd.,Zhuzi Lin, Futian, Shenzhen 518040, P.R. China. Tel: 86-755-82871080 Fax: 86-755-82871368 Issue Date: August 21, 2006 Test Date: August 15 ~20, 2006 Test by: Reviewed By: Kendy Wang Tony Wu

TABLE OF CONTENTS 1. GENERAL INFORMATION............................................................................................................... 3 1.1 Product Description for Equipment Under Test (EUT)............................................................ 3 1.2 Related Submittal(s) / Grant (s) .............................................................................................. 3 1.3 Test Methodology ................................................................................................................... 3 1.4 Test Facility............................................................................................................................. 4 2. SYSTEM TEST CONFIGURATION .................................................................................................. 5 2.1 EUT Configuration .................................................................................................................. 5 2.2 EUT Exercise .......................................................................................................................... 5 2.3 General Test Procedures........................................................................................................ 5 2.4 List of Measuring Equipments Used ....................................................................................... 5 3. SUMMARY OF TEST RESULTS ...................................................................................................... 6 4. TEST OF CONDUCTED EMISSION ................................................................................................. 7 4.1 Applicable Standard................................................................................................................ 7 4.2 Test Setup Diagram ................................................................................................................ 7 5- RADIATED EMISSIONS ................................................................................................................... 8 5.1 Limit of Radiated Emissions.................................................................................................. 8 5.2 Test Equipment Used ............................................................................................................. 8 5.3 EUT Setup .............................................................................................................................. 9 5.4 Test Procedure ....................................................................................................................... 9 5.5 Test Result............................................................................................................................ 10 6- OCCUPIED BANDWIDTH .............................................................................................................. 12 6.1 Limit of Occupied Bandwidth ................................................................................................ 12 6.2 Test Equipment Used ........................................................................................................... 12 6.3 Test Procedure ..................................................................................................................... 12 6.4 Occupied Bandwidth Test Result.......................................................................................... 12 Report No. BCT06H-029E Page 2 of 13

1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Applicant: YINRUN PLASTIC CRAFTS CO.,LTD Address of applicant: Yinrun Ind, Garden, Laimei, Zone,Chenghai,Shantou City, Guangdong, China Manufacturer: YINRUN PLASTIC CRAFTS CO.,LTD Address of manufacturer: Yinrun Ind, Garden, Laimei, Zone,Chenghai,Shantou City, Guangdong, China EUT Description: R/C Airplane Trade Name: N/A Model No.: 6024 Rated Voltage DC 9V (6 x1.5VAA alkaline battery) for Transmitter Frequency range 49.86MHz Number of channels 1 Channel Separation None Product Class: Low Power Communication Device Transmitter Measurement Procedure ANSI C63.4-2003 Remark: * The test data gathered are from the production sample provided by the manufacturer. 1.2 Related Submittal(s) / Grant (s) This submittal(s) is a test report based on the Electromagnetic Interference (EMI) tests performed on the EUT. The EMI measurements were performed according to the measurement procedure described in ANSI C63.4 - 2003. The tests were performed in order to determine compliance with FCC Part 15, Subpart C, section 15.235 rules. 1.3 Test Methodology Both conducted and radiated testing were performed according to the procedures in ANSI C63.4 - 2003, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. Radiated testing was performed at an antenna to EUT distance 3 meters. Report No. BCT06H-029E Page 3 of 13

1.4 Test Facility All measurement required was performed at laboratory of Solid Industrial (Shenzhen) Co., Ltd. at 333 Bulong Highway, Buji, Longgang, Shenzhen, Guangdong, China. The test facility is recognized, certified, or accredited by the following organizations: FCC – Registration No.: 759397 Solid Industrial., Ltd, EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 759397, Nov 04, 2003. Report No. BCT06H-029E Page 4 of 13

2. SYSTEM TEST CONFIGURATION The tests documented in this report were performed in accordance with ANSI C63.4-2003 and FCC CFR 47 Part 15 Subpart C. 2.1 EUT Configuration The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 2.2 EUT Exercise The calibrated antennas used to sample the radiated field strength are mounted on a non- conductive, motorized antenna mast 3 or 10 meters from the leading edge of the turntable. 2.3 General Test Procedures Conducted Emissions The EUT is placed on the turntable, which is 0.8 m above ground plane. According to the requirements in Section 7.1 of ANSI C63.4-2003.Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-Peak detector mode. Radiated Emissions The EUT is a placed on as turntable, which is 0.8 m above ground plane. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna, which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the maximum emissions, exploratory radiated emission measurements were made according to the requirements in Section 13.1.4.1 of ANSI C63.4-2003. 2.4 List of Measuring Equipments Used Calibration Items Equipment Manufacturer Model No. Last Cal Period 1 Spectrum Analyzer HP 8594A 2006/8 1 year 2 EMI Test Receiver R&S ESS 2006/8 1 year 3 RF Selector TOYO NS4901A 2006/8 1 year 4 Pre Amplifier Anritsu MH648A 2006/8 1 year 5 Bilog Antenna CHASE CBL6111A 2006/8 1 year 6 Turn Disc HD DS4150S 2006/8 1 year 7 Antenna Mast HD MA2400 2006/8 1 year Report No. BCT06H-029E Page 5 of 13

3. SUMMARY OF TEST RESULTS FCC Rules Description of Test Result 15.207 Disturbance Voltage at The Mains Terminals N/A, without AC power supply 15.235 Radiation Emission Pass 15.235 Occupied Bandwidth Pass Report No. BCT06H-029E Page 6 of 13

4. TEST OF CONDUCTED EMISSION 4.1 Applicable Standard Section 15.207: For a Low-power Radio-frequency Device is designed to be connected to the AC power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed below limits table. Limits ( dBuV) Frequency Range (MHz) Quasi-Peak Average 0.150～0.500 66～56 56～46 0.500～5.000 56 46 5.000～30.00 60 50 4.2 Test Setup Diagram Remark: 1. The setup of EUT is according with per ANSI C63.4-2003 measurement procedure. The specification used was with the FCC 15.207 limits. 2. The EUT is exclused from investigation of Disturbance Voltage at The Mains Terminals, for it is powered by DC 9V (6 x1.5VAA alkaline) bettary. According to the Section 15.207(d),measurement to demonstrate compliance with the limits of Disturbance Voltage at The Mains Terminals are not required to the devices which only employed bettary power for operation and which do not operate from the AC power lines or contain provisions for operation while connected to the AC power lines. Report No. BCT06H-029E Page 7 of 13

5- RADIATED EMISSIONS 5.1 Limit of Radiated Emissions Limits of Spurious Emissions (Fcc 47 Cfr 15.209 Class B): Frequency Distance Field Strengths Limits (MHz) (Meters) (dBµV/m) 30 ~ 88 3 40 88~216 3 43.5 216 ~ 960 3 46 960 ~ 1000 3 54 Note: (1) The tighter limit shall apply at the edge between two frequency bands. (2) The emission limits shown in the above table are based on measurement employing a CISPR quasi-peak detector and above 1000MHz are based on measurements employing an average detector. 5.2 Test Equipment Used Calibration Equipment Manufacturer Model No. Last Cal Period EMI Test Receiver ROHDE & SCHWARZ ESS 2006/8 1 year RF Selector TOYO NS4901A 2006/8 1 year Pre Amplifier Anritsu MH648A 2006/8 1 year Bilog Antenna CHASE CBL6111A 2006/8 1 year Turn Disc HD DS4150S 2006/8 1 year Antenna Mast HD MA2400 2006/8 1 year Report No. BCT06H-029E Page 8 of 13

5.3 EUT Setup Radiated Measurement Setup 5.4 Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. 1). Configure the EUT according to ANSI C63.4:2003. 2). The EUT was placed on the top of the turntable 0.8 meter above ground. 3). The receiving antenna was placed 3 meters far away from the turntable. 4). The turntable was rotated by 360 degrees to determine the position of the highest radiation. 5). For Spurious Emissions test, The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emission field strength of both horizontal and vertical polarization. For each suspected emission, the antenna tower was scanned (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. Report No. BCT06H-029E Page 9 of 13

5.5 Test Result Temperature ( ℃ ) : 22~23 EUT: R/C Airplane Humidity (%RH ): 50~54 M/N: 6024 Barometric Pressure ( mbar ): 950~1000 Operation Condition: Continuous Transmitting Fundamental Emission Test Data Peak Measurement Test Frequency Measuring Level (dBµV/m) Limits Margin (dB) (MHz) Vertical Horizontal (dBµV/m) Vertical Horizontal 49.8595 88.2 74.3 100 11.8 25.7 Average Measurement 49.8595 77.8 69.5 80 2.2 10.5 Result: The field strength of any emission within the operation band did not exceed 80 dBµV/m for average value or 100 dBµV/m for peak value. Report No. BCT06H-029E Page 10 of 13

Harmonics & Spurious Emission 49.86MHz Spurious Emission Maximum Position and Level Limit Margin Frequency Value Result (MHz) Polarity Transd dBµV/m dBµV/m dBµV/m dBµV/m 99.719 V 30.1 11.7 41.8 43.5 1.7 149.579 V 19.7 10.8 30.5 43.5 13.0 199.438 V 25.6 11.1 36.7 43.5 6.8 249.296 V 26.5 12.9 39.4 46 6.6 299.157 V 16.1 16.2 32.3 46 13.7 349.016 V 13.1 20.3 33.4 46 12.6 398.876 V 8.7 22.9 31.6 46 14.4 448.736 V 12.6 23.2 35.8 46 10.2 498.595 V 13.0 22.6 35.6 46 10.4 --- --- --- --- --- --- --- Maximum Position and Level Limit Margin Frequency Value Result (MHz) Polarity Transd dBµV/m dBµV/m dBµV/m dBµV/m 99.719 H 22.9 11.6 34.4 43.5 9.1 149.579 H 15.6 10.9 26.5 43.5 17.0 199.438 H 17.6 10.7 28.3 43.5 15.2 249.296 H 13.8 12.5 26.3 46 19.7 299.157 H 14.5 14.0 28.5 46 17.5 349.016 H 9.4 20.5 29.9 46 16.1 398.876 H 3.8 23.8 27.6 46 18.4 448.736 H 3.9 24.2 28.1 46 17.9 498.595 H 5.6 24.5 30.1 46 15.9 --- --- --- --- --- --- --- Remark: --- Means that The emission level of the rest measuring harmonic up to 5GHz are so low below applicable limit in operation mode, so the result were not recorded. Report No. BCT06H-029E Page 11 of 13

6- OCCUPIED BANDWIDTH 6.1 Limit of Occupied Bandwidth The field strength of any emissions appearing between the band edges and up to 10 kHz above and below the band edges shall be attenuated at least 26 dB below the level of the un-modulated carrier or to the general limits of 15.209, whichever permits the higher emission levels. 6.2 Test Equipment Used Calibration Equipment Manufacturer Model No. Last Cal Period Spectrum Analyzer HP 8594A 2006/8 1 year RF Selector TOYO NS4901A 2006/8 1 year Pre Amplifier Anritsu MH648A 2006/8 1 year Bilog Antenna CHASE CBL6111A 2006/8 1 year Turn Disc HD DS4150S 2006/8 1 year Antenna Mast HD MA2400 2006/8 1 year 6.3 Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. 1). Configure the EUT according to ANSI C63.4:2003. 2). The EUT was placed on the top of the turntable 0.8 meter above ground. 3). The receiving antenna was placed 3 meters far away from the turntable. 4). The turntable was rotated by 360 degrees to determine the position of the highest radiation. 5). For Spurious Emissions test, The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emission field strength of both horizontal and vertical polarization. For each suspected emission, the antenna tower was scanned (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 6.4 Occupied Bandwidth Test Result Temperature ( ℃ ) : 22~23 EUT: R/C Airplane Humidity (%RH ): 50~54 M/N: 6024 Barometric Pressure ( mbar ): 950~1000 Operation Condition: Continuous Transmitting Test plots see following: Report No. BCT06H-029E Page 12 of 13

Report No. BCT06H-029E Page 13 of 13


Document Created: 2006-08-22 21:31:46
Document Modified: 2006-08-22 21:31:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC