test data sheet

FCC ID: R68WIPORTG

Test Report

Download: PDF
FCCID_671297

WiPort Data Sheet General Description The WiPort™ is the most compact, integrated solution available to add 802.11b/g wireless networking to any device with a serial or wired Ethernet interface. Using this highly integrated hardware and software platform, you will add to your bottom line by significantly reducing product development time, risk, and cost. The WiPort offers the highest level of integration available in a device server. Within a compact package is a DSTni™ x86 controller, memory, 802.11b/g radio, a 10/100 Ethernet transceiver, and dual high-speed serial ports. All of this combines to give you a complete networking solution. The WiPort is designed with flexibility to support additional wireless standards without requiring redesign. Key Features To enable access to a local network or the Internet, the • Complete integrated RoHS compliant solution WiPort integrates a fully developed TCP/IP network • Supports 802.11 WLAN or Ethernet connectivity stack and OS. The WiPort also includes an embedded web server that can be used to remotely configure, • Serial to 802.11b/g conversion monitor, or troubleshoot the attached device. • Wired Ethernet to 802.11 b/g WLAN Bridging • Stable, field proven TCP/IP protocol suite and web- WiPort serves web pages to a web browser when there based application framework is a need to gather information or communicate with networked devices. The WiPort becomes a conduit • Optional End-to-End 128, 192 and 256 Bit AES between you and your device over the network or Encryption Internet. • WPA PSK TKIP security, 128 bit WEP encryption • Dual serial ports The Windows™-based configuration software, Device • Easy configuration through a web interface Installer™, simplifies installation and setup. The WiPort can also be configured locally through its serial port, or • Easy installation of customized web pages remotely over a network using Telnet (password- • Embedded web server protected) or a web browser. Flash memory provides • 11 General Purpose Input/Output (GPIO) pins for maintenance-free, nonvolatile storage of web • E-mail alerts pages, and allows future system software upgrades. • Upgradeable firmware via the network or serial port Hardware & Software Description • High performance data throughput The WiPort functions independently of a PC, providing a complete hardware and software solution for adding wireless connectivity to your edge devices. Within a single package this powerful device server comes with The WiPort runs on a single 3.3V supply, and has a an 802.11b wireless connection, a 10/100 Ethernet built-in voltage supervisory circuit. transceiver, a reliable and proven operating system The WiPort will connect through a coaxial cable “pigtail” stored in flash memory, an embedded web server, a full to a panel-mounted external antenna, which makes the TCP/IP protocol stack, and WEP security. electro-mechanical integration very simple. The WiPort software runs on a Lantronix DSTni controller which has 256 KB of internal SRAM, and 16 KB of boot ROM. The WiPort communicates to the edge device through a 3.3V logic level interface. 2 MB of flash memory is included for storing firmware and web pages. WiPort Data Sheet Copyright© 2006, Lantronix. All rights reserved.

Protocol Support The WiPort uses the widely accepted 802.11g protocol • IP for addressing, routing, and data block handling to connect to a wireless infrastructure or ad-hoc over the network. network, and is fully backward compatible with legacy 802.11b wireless networks. It uses the Transmission • User Datagram Protocol (UDP) for typical datagram Control Protocol (TCP) to assure that no data is lost or applications in which devices interact with other duplicated and that everything sent to the connection devices without maintaining a point-to-point arrives correctly at the target. connection. Other supported protocols are listed below: Dimensions • ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, • The WiPort dimensions are shown in the DHCP, HTTP, and SNMP for network communications. following drawing: • TCP, UDP, and Telnet for connections to the serial port. • TFTP for firmware updates. WiPort – Embedded Device Server (Note: Part #s on drawing are only representative) WiPort b/g Data Sheet – Rev 1.0 (March 2006) Page 2 of 7

WiPort Pin Functionality Pin Number WiPort Pin Function Pin Number WiPort Pin Function 1 3.3V Power 21 Reserved 2 3.3V Power 22 Reserved 3 RTS0 23 Signal Ground 4 TXD0 24 Signal Ground 5 RXD0 25 Reserved 6 Configurable Pin 2 26 Reserved 7 Configurable Pin 3 27 Ethernet Status LED2 8 CTS0 28 Ethernet Status LED1 9 Configurable Pin 10 29 Ethernet TX- 10 Configurable Pin 8 30 Ethernet TX+ 11 Signal Ground 31 Ethernet RX Center Tap 12 Signal Ground 32 Ethernet TX Center Tap 13 Reset In 33 Ethernet RX- 14 Configurable Pin 0 34 Ethernet RX+ 15 RTS1 35 Configurable Pin 1 16 TXD1 36 Reserved 17 RXD1 37 Configurable Pin 6 18 Configurable Pin 9 38 Configurable Pin 5 19 Configurable Pin 4 39 WLAN Activity LED 20 CTS1 40 Configurable Pin 7 Mating Connector Description Recommended: Samtec FTMH-120-03-F-DV-ES The mating (shrouded header) connector is a 1mm micro header, Alternative: Samtec FTMH-120-03-F-DV 40 pins, 2 x 20. (not shrouded) Alternative: Oupiin 2411-2X20GDN/017 (not shrouded) WiPort b/g Data Sheet – Rev 1.0 (March 2006) Page 3 of 7

WiPort Wireless Specifications Category Description Network Standards IEEE 802.11b ; IEEE 802.11g Frequency Range 2.412 – 2.484 GHz Antenna Connector 1, no diversity supported. Data Rates 1,2,5.5,11Mbps(802.11b) 6,9,12,18,24,36,48,54Mbps(802.11g) Number of Selectable Up to 14 channels. Profiles available will Radio Subchannels include USA, France, Japan, Spain, Canda and “Other” (multiple countries) Modulations OFDM, DSSS, DBPSK, DQPSK, CCK , 16QAM, 64QAM Antenna Connector 1 Security WEP 64/128, WPA – PSK, TKIP, AES end- to-end encryption Maximum Receive Level -10 dBm (with PER < 8%) Receiver Sensitivity -72dBm for 54Mbps -87 dBm for 11Mbps -89 dBm for 5.5Mbps -90 dBm for 2.0Mbps -92 dBm for 1.0Mbps WLAN Power and Link LED Max: 4 mA Current WiPort b/g Data Sheet – Rev 1.0 (March 2006) Page 4 of 7

WiPort Technical Data Category Description CPU, Memory Lantronix DSTni-EX 186 CPU, 256 KB zero wait state on-chip SRAM, 2048 KB Flash, 16 KB Boot ROM Firmware Upgradeable via TFTP and serial port Reset Circuit Reset In is low active. Minimum reset pulse width is 2 ms at IIL = -500µA Serial Interface CMOS (Asynchronous) 3.3V-level signals Rate is software selectable (300 bps to 921600 bps) Serial Line Formats 7 or 8 data bits, 1-2 Stop bits, Parity: odd, even, none Modem Control DTR, DCD Flow Control XON/XOFF (software), CTS/RTS (hardware), none Network Interface Wireless 802.11b, 802.11g and 10/100 Ethernet Protocols Supported ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP, SMTP, TFTP Media Access Control CSMA/CA with ACK Frequency Range 2.412 – 2.484 GHz Range Up to 328 feet (100m) indoors Modulation ƒ OFDM Techniques ƒ DSSS ƒ CCK ƒ DQPSK ƒ DBPSK ƒ 64 QAM ƒ 16 QAM Transmit Output Power 14 dBm + 1.5dBm/- 1.0 dBm Peak Supply Current 650 mA at 3.3V Management Internal web server, SNMP (read only) Serial login, Telnet login DeviceInstaller software Security Password protection, locking features, 64/128 bit WEP, WPA-PSK, End-to-End AES Internal Web Server Serves web pages Storage capacity: 1.2 MB Weight 29 grams Material Metal shell Temperature Operating range: -30°C to + 70°C (-22°F to 158°F) Storage range: -40°C to +85°C (-40°F to 185°F) Warranty 2-year limited warranty Included Software Windows™ 98/NT/2000/XP based DeviceInstaller configuration software and Windows™ based Comm Port Redirector, DeviceInstaller, Web-Manager. Average Power Consumption at 3.3V WLAN / Ethernet Mode High Performance (@ 88 MHz) / Power Consumption Nominal Performance (@ 48 MHz) WLAN mode High performance, data transfer at 922 kbps 1300mW WLAN mode Nominal performance, data transfer at 230 kbps 950mW WLAN mode High performance, no data transfer 580mW WLAN mode Nominal performance, no data transfer 300mW Ethernet mode * Nominal performance, no data transfer 750mW * Applicable only when the wired 802.3 interface is implemented and activated. WiPort b/g Data Sheet – Rev 1.0 (March 2006) Page 5 of 7

Certifications (Please contact Lantronix for latest updates) Description Country Certifications U.S. and Canadian (Bi-National) Standard for Safety of USA/Canada Information Technology Equipment, CSA-22.2 No. 60950-1-03 * UL 60950-1 Product Europe Standard for Safety of Information Technology Safety (Pre-test scan only) Equipment, EN 60950-1 International IEC 60950-1 Agency Compliance (Please contact Lantronix for latest updates) Description Country Compliance USA CFR Title 47 FCC Part 15-B, Class B EN 300 328; Data Transmission Equipment Operating in the 2.4GHz ISM Band and Using Spread Spectrum Electromagnetic Europe Techniques Compatibility EN 301 489-17 & EN 301 489-1; EMC Standard for Radio Equipment and Services Industry Canada RSS-210 Low Power License-Exempt Canada Radiocommunication Devices Australia /New AS/NZS CISPR 22 (EMC) Zealand AS/NZS 4771 (Radio) DC Characteristics for Serial and Power Interface Symbol Parameter Min Nominal Max Units Vcc Supply voltage (typical 3.3) (+/-2%) 3.135 3.3 3.45 V VIL Low Level Input Voltage -0.3 0.8 V VIH High Level Input Voltage 2.0 5.5 V VOL Low Level Output Voltage 0.4 V VOH High Level Output Voltage 2.4 V IL Input Leakage Current +/-0.01 +/-1 µA WiPort b/g Data Sheet – Rev 1.0 (March 2006) Page 6 of 7

Evaluation Kit Introduction Features of the Evaluation Kit A WiPort evaluation kit is available to provide a • Complete, ready-to-use WiPort and supporting simple, quick and cost-effective way to evaluate the Evaluation Board WiPort. Use the development kit to connect the • 3.3V power supply WiPort to your product design, and give your newly • RS-232 cable, DB9F/F, null modem networked product a test drive. • CAT5e UTP RJ45M/M Ethernet cable • WiPort CD containing complete user documentation, DeviceInstaller, Comm Port Redirector (with 30 day free evaluation of Secure Comm Port Redirector) • Antenna Features of the Evaluation Board The WiPort evaluation board includes a WiPort integrated with the following features: • Ready to use – just plug in the WiPort and connect to your system • Dual high-speed RS-232 transceivers & DB9 connectors for easy connection to a PC • Complete Ethernet interface, including magnetics, RJ-45 jack, and status LEDs • Test header for easy access to all 40 of the WiPort power & I/O pins Ordering Information Model Part Number Description WiPort WP2001000G-02 Standard WiPort B/G Bulk Pack Min. order: 25 units WiPort AES WP2002000G-02 Standard WiPort B/G AES Bulk Pack Min. order: 25 units WiPort SMPL WP200200SG-02 WiPort B/G AES, Sample 1 WiPort enclosed WiPort Eval. Kit WP200200KG-02 WiPort B/G AES Evaluation Kit WiPort Antenna 930-033 Accessory Antenna For details contact your local Lantronix representative or Lantronix directly: Asia Pacific Region (E-mail): AsiaPacific_sales@lantronix.com Europe (E-mail): eu_sales@lantronix.com Japan (E-mail): japan_sales@lantronix.com United States (E-mail): sales@lantronix.com Latin America & Caribbean (E-mail): la_sales@lantronix.com or call OEM sales support at 800-526-8764. ©2006 Lantronix, Inc. All rights reserved. Lantronix, WiPort and DSTni are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-440 3/2006 WiPort b/g Data Sheet – Rev 1.0 (March 2006) Page 7 of 7


Document Created: 2006-03-28 13:18:21
Document Modified: 2006-03-28 13:18:21
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC