Compliance sheet

FCC ID: R3USCDH2

Users Manual

Download: PDF
FCCID_4508889

SDW 5000 Series: SDW 10 HS | SDW 30 HS | SDW 60 HS | SDW 3 BS | SDW 5 BS | BTD 800 USB Specifications | Technische Daten | Caractéristiques techniques | Specifiche | Especificaciones técnicas | Especificações | Technische specificaties | Προδιαγραφές | Specifikationer | Specifikationer | Tekniset tiedot | Specyfikacje | Технические характеристики | Özellikler | 仕様 | Technické údaje | Műszaki leírás | Спецификации | Tehnilised andmed | Specifikācija | Specifikacijos | Specificații | Technické údaje | Specifikacije | Specifikacije Headset Headset Base station Bluetooth® dongle SDW 10 HS SDW 30 HS SDW 3 BS BTD 800 USB SDW 60 HS SDW 5 BS Dimensions 50 x 25 x 140 mm / Dimensions SDW 30 HS: Dimensions 87 x 122 x 105 mm / Dimensions 22 x 16 x 6 mm / (W x H x D) 1.97 x 0.98 x 5.51 in (W x H x D) 165 x 165 x 62 mm / (W x H x D) 3.43 x 4.80 x 4.13 in (W x H x D) 0.87 x 0.63 x 0.24 in 6.50 x 6.50 x 2.44 in Weight with... Ear hook: 44 g / 1.55 oz / 0.097 lbs Weight 320 g / 11.29 oz / 0.71 lbs Weight 2 g / 0.07 oz / 0.004 lbs SDW 60 HS: Headband: 58 g / 2.05 oz / 0.13 lbs 165 x 170 x 62 mm / Connectors • Power supply socket Neckband: 43 g / 1.52 oz / 0.095 lbs 6.50 x 6.69 x 2.44 in • Micro-USB socket *SDW 5 BS only Talk time Narrowband: up to 10 hours • USB socket Weight SDW 30 HS: • Busy light socket Wideband: up to 8 hours 98 g / 3.46 oz / 0.22 lbs • ACC socket* Bluetooth version 4.2/class 1 Super wideband: up to 6 hours SDW 60 HS: • Phone socket* 136 g / 4.80 oz / 0.30 lbs Range up to 25 m (device dependent) Standby time 48 hours • Handset socket* Talk time Narrowband: up to 14 hours Bluetooth Charging time 50%: approx. 30 min DECT frequency range European Union: 1880 – 1900 MHz Wideband: up to 11 hours frequency range 2402 – 2480 MHz 100%: approx. 1 hour United States: 1920 – 1930 MHz Super wideband: up to 9 hours Japan: 1893 – 1906 MHz Profiles HSP Headset Profile Range (environment Free line of sight: Listening time Wideband: up to 12 hours (version 1.2), dependent) up to 180 m / 590 ft RF output power EU/JP: max. 250 mW (EIRP) HFP Handsfree Profile Fullband: up to 9 hours in office buildings: US: max. 100 mW (EIRP) (version 1.7), up to 55 m / 180 ft Standby time 44 hours A2DP Advanced Audio Distribution Profile (version 1.3), Rechargeable battery Lithium Polymer; Charging time 50%: approx. 30 min AVRCP Audio Video Remote (built-in) 3.7 V; 335 mAh 100%: approx. 1 hour 30 min Control Profile (version 1.6) Speaker type Neodymium magnet Range (environment Free line of sight: Power supply unit Output power max. 8 dBm (EIRP) dependent) up to 180 m / 590 ft UNI PS EU/UK/US/AUS 02 Frequency response Typical sensitivity -89 dBm speaker 150 Hz – 16 kHz in office buildings: Nominal input voltage 100 – 240 V~ up to 55 m / 180 ft Microphone type 2 digital MEMS microphones, Nominal input current max. 0.3 A noise cancelling Rechargeable battery Lithium Polymer; (built-in) 3.7 V; 530 mAh Mains frequency 50 – 60 Hz Speaker type Neodymium magnet Nominal output voltage 5.0 V $ General data Frequency response Nominal output current 2A Temperature range speaker 150 Hz – 20 kHz Operation: +5 °C to +45 °C / +41 °F to +113 °F Weight approx. 100 g / 3.53 oz / 0.22 lbs Storage: -20 °C to +70 °C / -4 °F to +158 °F Microphone type 2 digital MEMS microphones, noise cancelling Relative humidity Operation: 20 to 85% Storage: 20 to 95% Trademarks The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser Communications A/S is under license.

In compliance with: Statements regarding FCC and Industry Canada/ Déclaration requise par la FCC et l’Industrie Canada Base station SDW 3 BS-EU (SCDB2) | Headsets SDW 10 HS SDW 30 HS Base station SDW 5 BS-EU (SCDB1) (SCDH1) (SCDH3) & EN FR SDW 60 HS (SCDH2) Europe This device complies with Part 15 of the FCC rules and Industry Déclaration requise par la l’Industrie Canada Canada’s licence-exempt RSSs. FCC ID: R3USCDH2 Cet appareil est conforme à les normes CNR d’Industrie Canada. USA FCC ID: R3USCDH1 Operation is subject to the following two conditions: (SCDH2 | SCDH3) Complies with L’utilisation de l’appareil doit respecter les deux conditions Singapore IMDA Standards 1) This device may not cause harmful interference; and suivantes : DB100582 IC: 2099D-SCDH2 2) This device must accept any interference, including interference 1) L’appareil ne doit pas produire d’interférences nuisibles, et, Canada IC: 2099D-SCDH1 that may cause undesired operation of the device. (SCDH2 | SCDH3) 2) il doit accepter toutes interférences reçues, y compris celles qui This equipment has been tested and found to comply with the pourraient avoir des effets non désirés sur son fonctionnement. Base station SDW 3 BS-AUS (SCDB6) | limits for a Class B digital device of the FCC Rules, pursuant to Europe Base station SDW 5 BS-AUS (SCDB5) part 15 of the FCC Rules. These limits are designed to provide Information sur l’exposition aux radiofréquences reasonable protection against harmful interference in a residential Cet équipement est conforme aux limites d‘exposition aux installation. rayonnements IC établies pour un environnement non contrôlé. Australia/ This equipment generates, uses and can radiate radio frequency Cet station de base doit être installé et utilisé avec un minimum de Australia/ New Zealand energy and, if not installed and used in accordance with 20 cm de distance entre la source de rayonnement et votre corps. New Zealand R-NZ the instructions, may cause harmful interference to radio Ce transmetteur ne doit pas etre place au meme endroit ou utilise R-NZ communications. However, there is no guarantee that interference simultanement avec un autre transmetteur ou antenne. will not occur in a particular installation. If this equipment does Complies with Base station SDW 3 BS-US (SCDB4) | cause harmful interference to radio or television reception, which Singapore IMDA Standards can be determined by turning the equipment off and on, the user DB100582 Base station SDW 5 BS-US (SCDB3) is encouraged to try to correct the interference by one or more of the following measures: SDW 30 HS USA FCC ID: R3USCDB3 (SCDB3 | SCDB4) • Reorient or relocate the receiving antenna. R 202-LSG047 • Increase the separation between the equipment and receiver. IC: 2099D-SCDB3 (SCDB3 | SCDB4) Japan R 202-LSF089 Canada • Connect the equipment into an outlet on a circuit different from SDW 60 HS CAN ICES-3 (B)/NMB-3 (B) that to which the receiver is connected. R 202-LSG046 • Consult the dealer or an experienced radio/ TV technician for help. Base station SDW 5 BS-JP (SCDB7) Changes or modifications made to this equipment not expressly Bluetooth® dongle BTD 800 USB approved by Sennheiser Electronic Corp. may void the FCC R 202-LSF088 authorization to operate this equipment. Japan USA FCC ID: R3UBTD800 T D 17-0023 202 RF Radiation Exposure Information The device complies with FCC and Industry Canada RF radiation exposure limits set forth for an uncontrolled environment. The IC: 2099D-BTD800 base station should be installed and operated with minimum Canada distance of 20 cm between the radiator and your body. CAN ICES-3 (B)/NMB-3 (B) Use of other accessories not verified by the manufacturer may not ensure compliance with FCC/IC RF exposure guidelines. These Japanese Radio Law and Japanese transmitters must not be co-located or operated in conjunction Europe Telecommunications Business Law Compliance with any other antenna or transmitter. Australia/ JA New Zealand This device is granted pursuant to the Japanese Radio Law Complies with (電波法) and the Japanese Telecommunications Business Law Singapore IMDA Standards (電気通信事業法) DB100582 This device should not be modified (otherwise the granted designation number will become invalid). Japan R 201-125772 Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark, www.sennheiser.com, Printed in China, 09/19, 770-00122/A07


Document Created: 2019-09-17 10:18:41
Document Modified: 2019-09-17 10:18:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC