I19N00570-SAR_rev02_7

FCC ID: R38YLCP3705AS

RF Exposure Info

Download: PDF
FCCID_4286429

No.I19N00570-SAR Page 257 of 282 2550 MHz Dipole Calibration Certificate ©Copyright. All rights reserved by SAICT.

No.I19N00570-SAR Page 258 of 282 ©Copyright. All rights reserved by SAICT.

No.I19N00570-SAR Page 259 of 282 ©Copyright. All rights reserved by SAICT.

No.I19N00570-SAR Page 260 of 282 ©Copyright. All rights reserved by SAICT.

No.I19N00570-SAR Page 261 of 282 ©Copyright. All rights reserved by SAICT.

No.I19N00570-SAR Page 262 of 282 ©Copyright. All rights reserved by SAICT.

No.I19N00570-SAR Page 263 of 282 ©Copyright. All rights reserved by SAICT.

No.I19N00570-SAR Page 264 of 282 ©Copyright. All rights reserved by SAICT.

m wnvenn neronae na wi 2 urze snn n e e e e e e es I Shenzhen Academy of Information and Communications Technology s x i1940 cahb'_'aflon Laboratory of e\“\“\\;""/,, S Schweizerischer Kalibrierdienst Schmid & Partner ;i% Service suisse d‘étalonnage Engineering AG Tm C Servizio svizzero dtaratura Zeughausstrasse 43, 8004 Zurich, Switzerland ‘:/,,/I/fl\\/\\\f hahts S swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client TMC—SZ (Auden) Certificate No: D5GHzV2—1238_Sep16 CALIBRATION CERTIFICATE Object D5GHzV2 — SN:1238 Calibration procedure(s) QA CAL—22.v2 Calibration procedure for dipole validation kits between 3—6 GHz Calibration date: September 21, 2016 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probabilty are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facifty: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 06—Apr—16 (No. 217—02288/02289) Apr—17 Power sensor NRP—291 SN: 103244 06—Apr—16 (No. 217—02288) Apr—17 Power sensor NRP—Z291 SN: 103245 06—Apr—16 (No. 217—02289) Apr—17 Reference 20 dB Attenuator SN: 5058 (20k) 05—Apr—16 (No. 217—02292) Apr—17 Type—N mismatch combination SN: 5047.2 / 06327 05—Apr—16 (No. 217—02295) Apr—17 Reference Probe EX3DV4 SN: 3508 0—Jun—16 (No. EX3—3503_Jun16) Jun—17 DAE4 SN: 601 30—Dec—15 (No. DAE4—601_Dec15) Dec—16 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (No. 217—02222) in house check: Oct—16 Power sensor HP 8481A SN: USs7202783 07—Oct—15 (No. 217—02222) in house check: Oct—16 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (No. 217—02228) in house check: Oct—16 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Jun—15) in house check: Oct—16 Network Analyzer HP 8753E SN: US37300585 18—Oct—01 (in house check Oct—15) in house check: Oct—16 Name Function Signature Calibrated by: Claudio Leubler Laboratory Technician Approved by: Katia Pokovic Technical Manager /6;7 g: Issued: September 22, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D5GHzV2—1238_Sep16 Page 1 of 16

_ kvorniearcaas mmz urzu non snn e n ns n n se se n se en we n of Information T¥m andCommen and Communications Technology Calibration 2 Laboratory of g Schweizerischer Kalibrierdienst Schmid & Partner _ Service suisse d‘étalonnage Engineering AG Servizio svizzero dtaratura Zeughausstrasse43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilatera! Agreement for therecognition of callbration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1238_Sep16 Page 2 of 16

— snn meircnace n wz urze : ‘ I‘ I Shenzhen Academy of Information and Communications Technology vegs sc se E2 | Measurement Conditions | DASY system configuration, as far as not given on page 1. | DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5200 MHz & 1 MHz 5300 MHz £ 1 MHz Frequency 5500 MHz & 1 MHz 5600 MHz & 1 MHz 5800 MHz + 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.6 + 6 % 4.54 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.76 Wikg SAR for nominal Head TSL parameters normalized to 1W 76.9 Wikg # 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.22 Wikg SAR for nominal Head TSL parameters normalized to 1W 21.9 Wikg 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 3 of 16

en ncenoneee nowi 2z urze 22lk I h Shenzhen Academy of Information and Communications Technology toseg e e~+ > > Head TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.9 4.76 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.4 £ 6 % 4.63 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.38 W/kg SAR for nominal Head TSL parameters normalized to 1W 83.0 W / kg x 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.40 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.7 Wikg #19.5 % (k=2) Head TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.6 4.96 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.2 26 % 4.83 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5500 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.21 W/kg SAR for nominal Head TSL parameters normalized to 1W 81.3 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.34 Wikg SAR for nominal Head TSL parameters normalized to 1W 28.1 Wikg 2 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 4 of 16

anvemneeronaze na wi 2 urze 2A ICI Shenzhen Academy of Information and Communications Technology Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.0 £ 6 % 4.93 mho/m + 6 % Head TSL temperature change during test <0.5 °C «> «+ SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.38 Wikg SAR for nominal Head TSL parameters normalized to 1W 82.9 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.39 Wikg SAR for nominal Head TSL parameters normalized to 1W 28.6 Wikg 2 19.5 % (k=2) Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 38.7 2 6 % 5.14 mho/m + 6 % Head TSL temperature change during test <0.5 °C « +« SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.96 Wikg SAR for nominal Head TSL parameters normalized to 1W 78.8 Wikg 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.26 Wikg SAR for nominal Head TSL parameters normalized to 1W 22.3 Wikg £ 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 5 of 16

anvemneeronaze na wi 2 urze 2A ICI Shenzhen Academy of Information and Communications Technology togs s < <n —— Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 47.5 + 6 % 5.45 mho/m + 6 % Body TSL temperature change during test <0.5 °C x l SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.48 Wikg SAR for nominal Body TSL parameters normalized to 1W 74.4 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.10 Wkg SAR for nominal Body TSL parameters normalized to 1W 20.9 W/kg £ 19.5 % (k=2) Body TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.9 5.42 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 47.3 +6 % 5.59 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.69 Wikg SAR for nominal Body TSL parameters normalized to 1W 76.5 Wikg £ 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.17 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.5 Wikg 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 6 of 16

rinemneronaze o wi 2 uze 22A I Cl Shenzhen Academy of Information and Communications Technology ttg— — Body TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.6 5.65 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 47.0 * 6 % 5.86 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5500 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 8.03 Whkg SAR for nominal Body TSL parameters normalized to 1W 79.9 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.23 Wikg SAR for nominal Body TSL parameters normalized to 1W 22.1 Wikg a 19.5 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 46.8 + 6 % 6.00 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.95 Wikg SAR for nominal Body TSL parameters normalized to 1W 79.1 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.23 Wikg SAR for nominal Body TSL parameters normalized to 1W 22.1 Wikg # 19.5 % (k=2) Certificate No: DSGHzV2—1238_Sep16 Page 7 of 16

m anvemneeronaze na wi 2 urze I Shenzhen Academy of Information and Communications Technology thgi e n e en — Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Conductivity Nominal Body TSL parameters 22.0 °C 6.00 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.4 x 6 % 6.29 mho/m + 6 % Body TSL temperature change during test <0.5 °C ——— «> SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.66 Wikg SAR for nominal Body TSL parameters normalized to 1W 76.2 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 218 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.1 Wikg 2 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 8 of 16

m anvemneeronaze na wi 2 urze I Shenzhen Academy of Information and Communications Technology Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 47.1 9 —5.8 jQ Return Loss —23.6 dB Antenna Parameters with Head TSL at 5300 MHz Impedance, transformed to feed point 50.5 Q — 3.2 jQ Return Loss —29.8 dB Antenna Parameters with Head TSL at 5500 MHz Impedance, transformed to feed point 49.0 Q +2.5 jQ Return Loss —31.2 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 50.0 2 + 0.6 ja Return Loss —44.1 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 55.6 0 + 1.9 jQ Return Loss —25.1 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 48.6 Q — 3.4 jQ Return Loss —28.6 dB Antenna Parameters with Body TSL at 5300 MHz Impedance, transformed to feed point 49.6 Q — 2.4 jQ Return Loss — 32.3 dB Antenna Parameters with Body TSL at 5500 MHz Impedance, transformed to feed point 49.5 Q + 2.5 jQ Return Loss —31.7 dB Certificate No: D5GHzV2—1238_Sep16 Page 9 of 16

_ enc noranaze no wi 2 urze n en t n e tR mt = ‘ I Shenzhen Academy of Information n and Communications Technology tgs n n sc —~— Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 50.8 0 + 2.5 jQ Return Loss —31.7 dB Antenna Parameters with Body TSL at 5800 MHz Impedance,transformed to feed point 56.0 9 + 3.0 jQ Return Loss — 24.0 dB General Antenna Parameters and Design Electrical Delay (one direction) [ 1.191 ns After long term use with 100W radiated power, only a slight warming of the dipole nearthe feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antennais therefore short—circuited for DC—signals. On someof the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole lengthis still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on May 04, 2015 Certificate No: D5GHzV2—1238_Sep16 Page 10 of 16

— renorincenonace nawi 2 urve noon e e ne n en e r n se es :A I ‘ I Shenzhen Acadomy of Information and Communications Technology to sys n se se en e DASY5 Validation Report for Head TSL Date: 21.09.2016 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole D5SGHzV2; Type: DSGHzV2; Serial: DSGHzV2 — SN:1238 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 4.54 S/m; &, = 34.6; p = 1000 kg/m3 Medium parameters used: f = 5300 MHz; 0 = 4.63 S/m; &, = 34.4; p = 1000 kg/m3 Medium parameters used: f= 5500 MHz; 0 = 4.83 $/m; &, = 34.2; p = 1000 kg/m3 Medium parameters used: f = 5600 MHz; 0 = 4.93 S/m; &, = 34.0; p = 1000 kg/m3 Medium parameters used: £= 5800 MHz; 0 = 5.14 S/m; &, = 33.7; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: «_ Probe: EX3DV4 — SN3503; ConvF(5.59, 5.59, 5.59); Calibrated: 30.06.2016, ConvF(5.14, 5.14, 5.14); Calibrated: 30.06.2016, ConvF(5.02, 5.02, 5.02); Calibrated: 30.06.2016, ConvF(4.89, 4.89, 4.89); Calibrated: 30.06.2016, ConvF(4.85, 4.85, 4.85); Calibrated: 30.06.2016; «_ Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 30.12.2015 + Phantom: Flat Phantom 5.0 (front); Type: QDOOOPS0AA; Serial: 1001 «_ DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.35 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 27.9 W/kg SAR(I g) =7.76 W/kg; SAR(10 g) = 2.22 W/kg Maximum value of SAR (measured) = 17.9 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 72.80 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) =31.1 W/kg SAR(I g) = 8.38 W/kg; SAR(10 g) = 2.4 W/kg Maximum value of SAR (measured) = 19.5 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Mcasurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.90 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 31.9 W/kg SAR(I g) = 8.21 W/kg; SAR(10 g) = 2.34 W/kg Maximum value of SAR (measured) = 19.5 W/kg Certificate No: D5GHzV2—1238_Sep16 Page 11 of 16 n eg n n o en snn en n e e y e es

== wnvemn ncvronaze o wi 2 urze uen s en ie 2 es Shenzhen Academy of Information and Communications Technology Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value =71.51 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 32.8 W/kg SAR(I g) = 8.38 W/kg; SAR(10 g) = 2.39 W/kg Maximum value of SAR (measured) = 20.0 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 69.07 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 32.5 W/kg SAR(I g) = 7.96 W/kg; SAR(10 g) = 2.26 W/kg Maximum value of SAR (measured) = 19.4 W/kg dB 0 —6.00 —12.00 —18.00 —24.00 —30.00 0 dB = 17.9 W/kg = 12.53 dBWikg " Certificate No: D5GHzV2—1238_Sep16 Page 12 of 16

~ eenmen nemonaee no wi 2 urze mm en t n en S S n w n nn t = ‘ I‘ Shenzhen Academy of Information and Communications Technology Impedance Measurement Plot for Head TSL 13 Sep 2016 13:42i14 CBR sii i uors 41 47.074 a —5.2578 sR es 0t 5.9457 pF 5 200.000 000 MHz J CH1 Markers Oe 2 50.549 a A ~2.2129 a son [ « 530000 OHz | :A a49.995 a t t ——1% 29357 a i a 5.50000 GHz | s \ # 4 49.951 a 0.6172 o 2;9 5.50000 GHz 5 55 1328 2& 5.50000 GHiz H1d j onz gii Los & ,qg/a‘;r —20 7@ c 41—23.554 dB _5 200.000000 MHz , fw...cooficcc l| 1 ... 1. i . + {| +——+— '+ 1——+——+ == | == T‘ —— CH2 Markers c f——{— T — +7 + f *T — 2~29.781 d8 S + l + M |— & B_ol o 5.30000 GHz | [ $—94.194 dB 5.50000 GHz 10 444444 0B fvg S.co000 GHz 16 _ | 5:—25.086 dB — t— t 1 7 590000 GHz Hig \f——— L_ r — STaRt 5 000.000 000 Mz ~sTor s ©00.000 o00 Niz . Certificate No: DSGHzV2—1238_Sep16 Page 13 of 16

— kn neeronace n wi 2z urve aoene k e n en n e e s w : I I Shenghen Academy of Information A and Communications Technology DASY5 Validation Report for Body TSL Date: 20.09.2016 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole D5SGHzV2; Type: DSGHzV2; Serial: DSGHzV2 — SN:1238 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; a = 5.45 S/m; &, = 47.5; p= 1000 kg,/m3 Medium parameters used: f = 5300 MHz; a = 5.59 S/m; &, = 47.3; p= 1000 kg/m3 Medium parameters used: £= 5500 MHz; 0 = 5.86 S/m:; &, = 47.0; p= 1000 kg/m* Medium parameters used: £= 5600 MHz; 0 = 6.00 S/m; &, = 46.8; p= 1000 kg/m* Medium parameters used: £= 5800 MHz; 0 = 6.29 S/m; &, = 46.4; p= 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: «_ Probe: EX3DV4 — SN3503; ConvF(4.99, 4.99, 4.99); Calibrated: 30.06.2016, ConvF(4.75, 4.75, 4.75); Calibrated: 30.06.2016, ConvF(4.4, 4.4, 4.4); Calibrated: 30.06.2016, ConvF(4.35, 4.35, 4.35); Calibrated: 30.06.2016, ConvF(4.27, 4.27, 4.27); Calibrated: 30.06.2016; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 30.12.2015 * Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 «_ DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5200MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurementgrid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.67 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 27.8 W/kg SAR(I g) = 7.48 W/kg; SAR(10 g) = 2.1 W/kg Maximum value of SAR (measured) = 17.3 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.01 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 29.4 W/kg SAR(I g) = 7.69 W/kg; SAR(10 g) = 217 W/kg Maximum value of SAR (measured) = 18.0 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.20 V/m; Power Drift = —0.05 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(I g) = 8.03 W/kg; SAR(10 g) = 2.23 W/kg Maximum value of SAR (measured) = 19.2 W/kg Certificate No: D5GHzV2—1238_Sep16 Page 14 of 16

== wnvemn ncvronaze o wi 2 urze oo Shenzhen Academy of Information and Communications Technology Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.47 V/m; Power Drift = —0.07 dB Peak SAR (extrapolated) = 32.7 W/kg SAR(I g) =7.95 W/kg; SAR(10 g) = 2.23 W/kg Maximum value of SAR (measured) =19.1 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.40 V/m; Power Drift = —0.08 dB Peak SAR (extrapolated) = 33.2 W/kg SAR(I g) = 7.66 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 18.8 W/kg dB 0 —6.00 —12.00 —18.00 —24.00 ~30.00 0 dB = 17.3 W/kg = 12.38 dBW/kg Certificate No: D5GHzV2—1238_Sep16 Page 15 of 16


Document Created: 2019-05-31 07:48:48
Document Modified: 2019-05-31 07:48:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC