Test Report

FCC ID: R38YL7560T

Test Report

Download: PDF
FCCID_2095334

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 1 of 15 FCC Part 15B TEST REPORT Product Name : Coolpad Flo Model Name : Coolpad 7560T Prepared for: Yulong Computer Telecommunication Scientific (Shenzhen) Co. LTD Hi-Tech Industry Park(North),Nanshan District, Shenzhen City, Guangdong Province, P.R.C. Prepared by: Unilab (Shanghai) Co., Ltd. FCC 2.948 register number is 714465 No. 1350, Lianxi Rd. Pudong New District, Shanghai, China TEL: +86-21-50275125 FAX: +86-21-50275126 Report Number : UL20130826001-2 Date of Report : 2013-09-03 Date of Test : 2013-08-26~2013-09-03 Notes： The test results only relate to these samples which have been tested. Partly using this report will not be admitted unless been allowed by Unilab. Unilab is only responsible for the complete report with the reported stamp of Unilab.

Unilab ® Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001—2 Page 2 of 15 Applicant: Yulong Computer Telecommunication Scientific (Shenzhen) Co. LTD Park(North),Nanshan District, Shenzhen City, Guangdong Province, P.R.C. Manufacturer: Yulong Computer Telecommunication Scientific (Shenzhen) Co. LTD Park(North),Nanshan District, Shenzhen City, Guangdong Province, P.R.C. Product Name: Coolpad Flo Brand Name: Coolpad Model Name: Coolpad 7560T FCC ID: R3SYL756OT IC ID: 10367A—YL7560T EUT Voltage: AC input: AC 100~240V 50/60Hz Battery: 3.6V~4.2V Date of Receipt: 2013—08—26 Test Standard: FCC CFR Tile 47 Part 15 Subpart B Test Result: Complied Date of Test 2013—08—26~2013—09—03 Prepared by : g /ME? (Technical Engineer: Flame Wang) Reviewed by : F@f@s& (ad (Senior Engineer: Forest Cao) z /A Wom } / O 7 aA Approved by : ) (Supervisor: Eva Wang)

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 3 of 15 TABLE OF CONTENTS 1. TECHNIACL SUMMARY ...................................................................................... 4 1.1 SUMMARY OF STANDARDS AND TEST RESULTS ............................... 4 1.2 TEST UNCERTAINTY................................................................................ 4 1.3 TEST EQUIPMENT LIST ........................................................................... 4 1.4 SUPPORT EQUIPMENT ............................................................................ 5 1.5 TEST FACILITY ......................................................................................... 5 1.6 TEST SETUP CONFIGURATION .............................................................. 5 2. CONDUCTED DISTURBANCE ............................................................................ 6 2.1 TEST SETUP ............................................................................................. 6 2.2 LIMITS........................................................................................................ 6 2.3 TEST PROCEDURE .................................................................................. 6 2.4 TEST RESULT ........................................................................................... 7 3. RADIATED DISTURBANCE (RE) ........................................................................ 9 3.1 TEST SETUP ............................................................................................. 9 3.2 LIMITS........................................................................................................ 9 3.3 TEST PROCEDURE ................................................................................ 10 3.4 TEST RESULT ......................................................................................... 11 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP.............................................. 15 APPENDIX 2 PHOTOGRAPHS OF EUT ............................................................ 15

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 4 of 15 1. TECHNIACL SUMMARY 1.1 SUMMARY OF STANDARDS AND TEST RESULTS The EUT have been tested according to the applicable standards as referenced below: Test Item FCC Result Conducted disturbance FCC 15.107 P Radiated disturbance FCC 15.109 P Note: P means pass, F means failure, N/A means not applicable 1.2 TEST UNCERTAINTY Where relevant, the following test uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Test item Value (dB) Conducted disturbance 3.4 Radiated disturbance 4.2 1.3 TEST EQUIPMENT LIST Shielding Room No. 3 - Conducted disturbance Test Equipment Manufacturer Model Serial No. Due Date Receiver Agilent N9038A MY51210142 2013/09/28 LISN R&S ENV216 100069 2014/06/23 3m Semi-anechoic Chamber - Radiated disturbance Test Equipment Manufacturer Model Serial No. Due Date 3m Chamber & ETS-LINDGREN FACT-3 CT-0000336 2013/11/27 Accessory Equipment Receiver Agilent N9038A MY51210142 2013/09/28 Biconilog Antenna SCHWARZBECK VULB 9160 3316 2013/09/20 Horn Antenna SCHWARZBECK BBHA9120D 00057407 2013/09/20 Microwave Preamplifier EM Electronics EM30180 3008A02425 2014/03/01 The measuring equipment utilized to perform the tests documented in this report has been calibrated once a year or in accordance with the manufacturer's recommendations, and has been calibrated by accredited calibration laboratories.

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 5 of 15 1.4 SUPPORT EQUIPMENT Equipment Manufacturer Model Serial No. Due Date PC DELL VOSTRO 260 7JXLB3X / Displayer DELL E1910Hc CN-0CD1MT-64180-OC7-06TS / Mouse DELL MS111-P CN-0MF3JY-71581-2C7-05GB / Keyboard DELL KB212-B CN-0Y88XT-65890-22L-01MG-A01 / Adapter JHC JHC-A01-1A0 / / 1.5 TEST FACILITY All test facilities used to collect the test data are located at No. 1350, Lianxi Rd. Pudong New District, Shanghai, China. The site and apparatus are constructed in conformance with the requirements of ANSI C63.4: 2009, CISPR 16-1-1 and other equivalent standards. The laboratory is compliance with the requirements of the ISO/IEC/E 17025. 1.6 TEST SETUP CONFIGURATION See test photographs attached in Appendix 1 for the actual connections between EUT and support equipment. Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 3. All the tests were carried out with the EUT in normal operation. Which was shown in this test report is the worst test mode.

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 6 of 15 2. CONDUCTED DISTURBANCE 2.1 TEST SETUP For mains port: 2.2 LIMITS Limits for Class B digital devices Limits Frequency range dB(μV) (MHz) Quasi-peak Average 0,15 to 0,50 66 to 56 56 to 46 0,50 to 5 56 46 5 to 30 60 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50 MHz. 2.3 TEST PROCEDURE For mains port: a. The EUT and support equipment were placed on a nonconductive table 0.8m above the horizontal ground reference plane, and 0.4 m from the vertical ground reference plane. The EUT connected to the main through Line Impedance Stability Network (L.I.S.N) to provide a 50 /50uH coupling impedance for the measuring equipment. The support equipment is also connected to the main power through a LISN that provides a 50 /50uH coupling impedance with 50  terminations. Both sides of AC line (Line & Neutral) were checked to find out the maximum conducted emission. b. The RBW of the receiver was set at 9 kHz. The frequency range from 150 kHz to 30 MHz was checked. Run the receiver’s pre-scan to record the maximum disturbance generated from EUT in all power lines in the full band. c. For each frequency whose maximum record was higher or close to limit, measure its QP and AVG values and record.

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 7 of 15 2.4 TEST RESULT For mains port: Test mode: Data exchange

Unilab(Shanghai) Co., Lid Unilab Report No. : UL20130826001—2 Page 8 of 15 Level @Bu) zo \—_IM& s { Fee prs class.Bav s 2 6 & s 3 3 A6 2 5 1 2 5 10 20 30 Frequency (Miz) Site : shielded room 3 Condition _: FCC P15 CLASS—B (QP) ENV216(N)—20120730 NEUTRAL Eut Coolpad Flo Model Name Coolpad 7560T Temp/Humi. 24 °C / 57% Power Rating: DC 3.7V Mode : data exchange Memo ReadAntenna Cable Preanp Limit Over Freq Level Factor Loss Factor Level Line Limit Remark Wiz dBn dB/m d8 dB dBn/m dBn/m dB 19 35.75 10.33 0.23 46.31. 64.02 —17.71 Peak 28 32.72 10.43 0.19 43.34 60.68 —17.34 Peak 56 32.92 10.38 .11 43.41. 56.00 —12.59 Peak .04 29.42 10.31. 0.14 39.8756.00 —16.13 Peak 40 31.88 10.32 0.15 42.3556.00 —13.65 Peak co 32.60 10.45 0.39 43.44 60.00 —16.56 Peak a uie w ie Pursee s 0999 0 ssssss

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 9 of 15 3. RADIATED DISTURBANCE (RE) 3.1 TEST SETUP 30MHz ~ 1GHz: Above 1GHz: 3.2 LIMITS Limits for Class B digital devices limits at 3m Frequency (MHz) dB(μV/m) 30-88 40.0 88-216 43.5 216-960 46.0 Above 960 54.0 NOTE: 1. The lower limit shall apply at the transition frequency. 2. The limits shown above are based on measuring equipment employing a CISPR quasi-peak detector function for frequencies below or equal to 1000MHz. 3. The limits shown above are based on measuring equipment employing an average detector function for frequencies above 1000MHz.

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 10 of 15 3.3 TEST PROCEDURE 30MHz ~ 1GHz: a. The EUT and support equipment were placed on the non-conductive turntable 0.8m above the horizontal metal ground plane at a chamber. The EUT was set 3 meters away from the receiving antenna, which was mounted on an antenna tower. Broadband antenna (Calibrated Bilog Antenna) was used as receiving antenna. b. The frequency range from 30MHz to 1GHz was checked. The RBW of the receiver was set at 120kHz. Set the receiver in Peak detector, Max Hold mode. Record the maximum field strength of all the pre-scan process in the full band when the antenna is varied between 1~4 m in both horizontal and vertical, and the turntable is rotated from 0 to 360 degrees. c. For each frequency whose maximum record was higher or close to limit, measure its QP value: vary the antenna’s height and rotate the turntable from 0 to 360 degrees to find the height and degree where EUT radiated the maximum emission, then set the test frequency receiver to QP Detector and record the maximum value. Above 1GHz: a. The EUT and support equipment were placed on the non-conductive turntable 0.8m above the ground at a chamber. The EUT was set 3 meters away from the receiving antenna, which was mounted on an antenna tower. Horn antenna was used as receiving antenna. b. The frequency range above 1GHz was checked. The RBW of the receiver was set at 1MHz. Set the receiver in Peak detector, Max Hold mode. Record the maximum field strength of all the pre-scan process in the full band when the antenna is 1m and varied in both horizontal and vertical, and the turntable is rotated from 0 to 360 degrees. c. For each frequency whose maximum record was higher or close to limit, measure its Average value: rotate the turntable from 0 to 360 degrees to find the degree where EUT radiated the maximum emission, then set the test frequency receiver to EMI Average Detector and record the maximum value.

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 11 of 15 3.4 TEST RESULT 30MHz ~ 1GHz: Test mode: Data exchange

Unilab(Ghanghai) Co.,Ltd Unilab Report No. : UL20130826001—2 Page 12 of 15 Level (@Bu¥im) 3 s ree class8 a8 s & s 3 200. 300. 400. 500. 600. 700. 800. 800. toco Frequency (MKz) Site #f chanber Condition .: FCC CLASS—B 3m VULB916@ HORTZONTAL EuT Coolpad Flo Model. Name : Coolpad 7560T Temp/Humi. 2s °C / se ® Power Ratin pe 3.7V Mode data exchange Memo ReadAntenna Cable Preanp Limit Over Level Factor Loss Factor Level Line Limit Remark dn dB/m d8 dBn/m dBn/m dB a & 96.93 21.74 9.91 .24 32.89 43.50 —10.61 Peak 240.49 21.25 11.71 42 35.08 46.00 —10.92 Peak 284.14 16.06 12.89 .23 31.18 46.00 —14.82 Peak 480.08 14.21 16.89 .00 34.10 46.00 —11.90 Peak pp 767.20 11.78 2139 .71 36.88 46.00 —9.12 Peak 890.39 9.73° 22.38 .02 36.13 46.00 —9.87 Peak a ie un ce > w wiy n sesses ssssss

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 13 of 15 Above 1GHz: Test mode: Data exchange

Level (@Bu¥im) Foc CLASs—8 PK 70 co FCC CLASS—8 AV 5o 40 30 20 10 “‘1000 4000 6000. 8000. 10000, 12000. 14000. 16000. 18000 Frequency (MKz) Site : chamber Condition : FCC CLASS—8 PK 3m BBHAO120D(942) VERTICAL gut : Coolpad Flo Model Name _: Coolpad 7560T Temp/Humi : 25 °C / 56 % Power Rating: DC 3.7V Mode : data exchange Memo ReadAntenna Cable Preanp Limit Over Freq Level Factor Loss Factor Level Line Limit Remark Wiz dom d8/m d8 dB dBn/m don/m d8 1 1595.00 56.98 24.98 5.71 38.46 49.21 74.00 —24.79 Peak 2 2462.00 5.27 27.49 7.39 38.32 46.83 74.00 —27.17 Peak 3 2089.00 48.40 28.47 8.06 38.11 46.82 74.00 —27.18 Peak 4 7205.00 37.61 36.47 12.73 37.01 49.80 74.00 —24.20 Peak 5 10826.00 31.54 40.03 15.68 38.98 48.27 74.00 —25.73 Peak 6 pp 14328.00 27.08 42.37 19.05 38.38 50.12 74.00 —23.88 Peak

Unilab(Shanghai) Co.,Ltd. Report No. : UL20130826001-2 Page 15 of 15 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP Please refer to the file named “R38YL7560T_Part15B Setup Photos”. APPENDIX 2 PHOTOGRAPHS OF EUT Please refer to the two files named “R38YL560T_External Photos” and “R38YL560T_INternal Photos”. ----End of the report----


Document Created: 2013-10-17 05:11:39
Document Modified: 2013-10-17 05:11:39
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC