WA2200-C QSG

FCC ID: R33WA2200

Users Manual

Download: PDF
FCCID_4320797

WA-2200-C, WA-2200-C-1 802.11ac 2x2 Wave 2 Access Point, In-Ceiling BakPak Lite QUICK START GUIDE

WA-2200-C features Mounting into the bracket • 802.11ac 2x2 Wave 2 Access Point, In-Ceiling 1 Place the included template against the ceiling or wall at the desired location, • Built-in 2×2 internal antennas then cut along the dotted line with a drywall saw. • Powered by PoE (or 12VDC 1A power adapter, not included) 2 To mount the access point into the bracket, review the visual guide that follows: • 1 Gigabit LAN port • BakPak Lite built in: Manage device from the standard BakPak interface • For more detailed instructions, refer to the WA-2200 User Guide (pkdge.co/wa2200-ug). System requirements • Windows or Mac PC with an Ethernet interface Default settings and credentials • Operation mode: Access Point • IP address: If no DHCP server is detected, the default IP address will be automatically set to 192.168.1.21. • Username/Password (default): admin/password • SSIDs (default): Pakedge-Main (5 GHz), Pakedge-Alt (2.4 GHz), security/ password: WPA2-PSK/pakedgewireless • Guest SSIDs (default): PakedgeGuest2.4 and PakedgeGuest5, security/password: WPA2/pakedgeguest • Transmit power: Default is 13 dBm for 2.4 GHz and 18 dBm for 5 GHz. 2 3

Powering up The access point can be powered only by either PoE or the optional AC power adapter (not included). To power up the access point: 1 Connect power using a POE injector or POE switch, or with the optional AC power adapter (not included). The access point should now be up and running with its default settings. It does not need to be configured to be functional. To make changes to the SSID and security settings, you need to access the AP’s interface using a web browser. 4 5

Logging in to the access point Registering your device with BakPak Lite To log in to the access point: You can connect your access point to your existing BakPak account or create a new account to manage all of your BakPak network management agents. 1 Connect the access point to your PoE switch with an Ethernet cable. 2 Log in to your router to find the IP address assigned to the access point under To register your device to your BakPak account: the DHCP Client Table, then enter into a web browser (or click) that IP address to 1 In the device’s Connections tab, to the right of the “This product is not managed open the access point interface. The Log In page opens. by BakPak” message, click Click here to enroll. Tip: If you do not have a router in your network that distributes IP addresses, you can try to access the access point through its default IP address of 192.168.1.21. 3 In the username box, type admin. In the password box, type password, then click Log in. The first time you log in, the Configure page opens. The BakPak Registration page opens. 2 Follow the on-screen instructions to complete your device registration. 4 Enter and verify a new password (required) before continuing, then click Apply to complete the setup. Caution: For international models, you must change the Country Code (a drop-down list defaulting to GB - United Kingdom), to the specific country of operation. 6 7

Adding more WA Series APs to the BakPak site Adding WA Series APs to the site To manage and set up more than one WA-2200, a BakPak site must be created to To add APs and provision them with the existing configuration: manage them as a group. 1 Make sure that the first AP is already configured, and that the additional APs are To create a BakPak site: turned on for at least five minutes and connected to your network. 1 Log in to your BakPak account, then click Add Site to create a site. 2 In BakPak, select the new WA-2200 site, then click Device Discovery. 2 In the Management Agent list, select the first WA-2200, complete the site information, then click OK. Any additional WA Series APs are discovered and appear as tiles that can be selected (already selected by default). The site is created, and the WA-2200 will act as the “master AP” for adding more 3 Click OK. The APs are added to the site. WA Series APs to the site. 4 To apply the first AP’s settings to the new APs, in the BakPak site select the first AP you set up (on the previous page), then complete the site information and click Save & Apply Multiple at the bottom. The settings are copied to the APs. 8 9

Technical Support For technical help: www.pakedge.com/portal support@pakedge.com (650) 385-8703 For regulatory information: www.pakedge.com/regulatory Latest version at pkdge.co/wa2200c-qsg 11734 S. Election Road Draper, UT 84020 Main: (650) 385-8700 Fax: (650) 685-5520 www.pakedge.com sales@pakedge.com ©2018 Control4. All rights reserved. 200-00577-B 2018-12-04 MS


Document Created: 2018-12-04 13:09:45
Document Modified: 2018-12-04 13:09:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC