RF exposure Info

FCC ID: QZC-RMD-01

RF Exposure Info

Download: PDF
FCCID_3262375

FCC Part 1 Subpart I FCC Part 2 Subpart J RF EXPOSURE REPORT FOR WIRELESS TRANSMITTER MODEL NUMBER: RFMM FCC ID: QZC-RMD-01 REPORT NUMBER: 10583303C ISSUE DATE: December 20, 2016 Prepared for Elster American Meter Co LLC 2221 Industrial Rd Nebraska City NE, 68410-6886, USA Prepared by UL LLC 333 Pfingsten Rd. Northbrook, IL 60062 TEL: (847) 272-8800 NVLAP Lab code: 100414-0

REPORT NO: 10583303C DATE: December 20, 2016 FCC ID: QZC-RMD-01 Revision History Issue Rev. Date Revisions Revised By 2016- -- Initial Issue VS 04-26 2016- Corrected nominal output power and added worst Rev1 BM 12-20 case power Page 2 of 8 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: 10583303C DATE: December 20, 2016 FCC ID: QZC-RMD-01 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. REFERENCES ...................................................................................................................... 5 4. FACILITIES AND ACCREDITATION .................................................................................... 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ......................................................................... 6 5.1. FCC RULES ................................................................................................................... 6 5.2. EQUATIONS .................................................................................................................. 7 5.3. LIMITS AND IC EXEMPTION ......................................................................................... 8 6. RF EXPOSURE RESULTS ................................................................................................... 8 Page 3 of 8 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: 10583303C DATE: December 20, 2016 FCC ID: QZC-RMD-01 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Elster American Meter Co LLC 2221 Industrial Rd Nebraska City, NE, 68410-6886, USA EUT DESCRIPTION: Wireless Transmitter MODEL: RFMM SERIAL NUMBER: None DATE TESTED: September 10, 2015 to December 20, 2016 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL LLC By: Tested By: Vincent Sabalvaro Bart Mucha EMC Engineer Staff Engineer UL LLC UL LLC Page 4 of 8 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: 10583303C DATE: December 20, 2016 FCC ID: QZC-RMD-01 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01. 3. REFERENCES Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 333 Pfingsten Road, Northbrook, IL 60062 USA. UL NBK is accredited by NVLAP, Laboratory Code 100414-0. The full scope of accreditation can be viewed at http://ts.nist.gov Page 5 of 8 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: 10583303C DATE: December 20, 2016 FCC ID: QZC-RMD-01 5. MAXIMUM PERMISSIBLE RF EXPOSURE 5.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. Page 6 of 8 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: 10583303C DATE: December 20, 2016 FCC ID: QZC-RMD-01 5.2. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 7 of 8 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC.

REPORT NO: 10583303C DATE: December 20, 2016 FCC ID: QZC-RMD-01 5.3. LIMITS AND IC EXEMPTION FIXED LIMITS For operation in the 902MHz – 928MHz Band: From FCC §1.1310 Table 1 (B), the maximum value of S = f/1500 = 902/1500 = 0.6 mW/cm^2 6. RF EXPOSURE RESULTS In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. (Single chain transmitters, no colocation, 20 cm MPE distance) Single Chain and non-colocated transmitters Band Mode Separation Output Antenna EIRP FCC Power Distance Peak Gain Density Power (cm) (dBm) (dBi) (mW) (mW/cm^2) *902-928MHz FHSS 20 23.29 0.50 239.4 0.047649 **902-928MHz FHSS 20 23.69 0.50 262.5 0.052246 * Initial power measured during EMC testing where settings adjusted to put out maximum power. ** Accounting for additional +0.4dB based on power tolerance reported by the manufacurer. Above results show that device will comply with MPE limits even if output power varies per reported tolerance. END OF REPORT Page 8 of 8 UL LLC FORM NO: CCSUP4701I 333 Pfingsten Rd., Northbrook, IL 60062, USA TEL: (847) 272-8800 This report shall not be reproduced except in full, without the written approval of UL LLC.


Document Created: 2017-12-21 00:25:56
Document Modified: 2017-12-21 00:25:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC