Test Report NFC

FCC ID: QZ9-KA3

Test Report

Download: PDF

FCCID_4189911

Test report no.: 1-5652/17-01-05-A

1 Table of contents

1 Table of contents ............................................................................................................................................2
2 General information .......................................................................................................................................3
2.1 Notes and disclaimer ..........................................................................................................................3
2.2 Application details ...............................................................................................................................3
2.3 Test laboratories sub-contracted ......................................................................................................3
3 Test standard/s and references ....................................................................................................................3
4 Test environment............................................................................................................................................4
5 Test item ..........................................................................................................................................................4
5.1 General description .............................................................................................................................4
5.2 Additional information ........................................................................................................................4
6 Description of the test setup .........................................................................................................................5
6.1 Shielded semi anechoic chamber ......................................................................................................6
6.2 Shielded fully anechoic chamber ......................................................................................................7
6.3 RF measurements normal and extreme conditions .........................................................................8
7 Sequence of testing .......................................................................................................................................9
7.1 Sequence of testing radiated spurious 9 kHz to 30 MHz.................................................................9
7.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ..............................................................10
8 Measurement uncertainty ............................................................................................................................11
9 Summary of measurement results .............................................................................................................12
10 Additional comments ...............................................................................................................................12
11 Measurement results ................................................................................................................................13
11.1 Occupied bandwidth......................................................................................................................13
11.2 Field strength of the fundamental ................................................................................................14
11.3 Field strength of the harmonics and spurious ...........................................................................15
11.4 Conducted limits ............................................................................................................................18
11.5 Frequency error .............................................................................................................................21
12 Observations .............................................................................................................................................30
Annex A Glossary ..........................................................................................................................................31
Annex B Document history ..........................................................................................................................32
Annex C Accreditation Certificate ...............................................................................................................32

© CTC advanced GmbH Page 2 of 32

Test report no.: 1-5652/17-01-05-A

4 Test environment
Tnom +22 °C during room temperature tests
Temperature : Tmax +85 °C during high temperature tests
Tmin -40 °C during low temperature tests
Relative humidity content : 36 %
Barometric pressure : 1002 hpa
Vnom 12 V DC by car battery
Power supply : Vmax 16 V
Vmin 6 V

5 Test item

5.1 General description

Kind of test item : Coupling antenna with NFC & wireless charging
Type identification : Koppelantenne Gen. 3
HMN : -/-
PMN : Koppelantenne Gen. 3
HVIN : Koppelantenne Gen. 3
FVIN : -/-
S/N serial number : 3180000000001761598
HW hardware status : H09
SW software status : 0050
13.110 MHz to 14.010 MHz
Frequency band :
13.56 MHz
Type of radio transmission :
Modulated carrier
Use of frequency spectrum :
Type of modulation : ASK
Number of channels : 1
Antenna : Integrated PCB loop antenna
Power supply : 12 V DC by car battery
Temperature range : -40°C to +85°C

5.2 Additional information
The content of the following annexes is defined in the QA. It may be that not all of the listed annexes are
necessary for this report, thus some values in between may be missing.

Test setup and EUT photos are included in test report: 1-5652/17-01-01_AnnexA
1-5652/17-01-01_AnnexB
1-5652/17-01-01_AnnexD

© CTC advanced GmbH Page 4 of 32

Test report no.: 1-5652/17-01-05-A

6 Description of the test setup
Typically, the calibrations of the test apparatus are commissioned to and performed by an accredited calibration
laboratory. The calibration intervals are determined in accordance with the DIN EN ISO/IEC 17025. In addition to
the external calibrations, the laboratory executes comparison measurements with other calibrated test systems
or effective verifications. Weekly chamber inspections and range calibrations are performed. Where possible, RF
generating and signaling equipment as well as measuring receivers and analyzers are connected to an external
high-precision 10 MHz reference (GPS-based or rubidium frequency standard).

In order to simplify the identification of the equipment used at some special tests, some items of test equipment
and ancillaries can be provided with an identifier or number in the equipment list below (Lab/Item).

Agenda: Kind of Calibration

k calibration / calibrated EK limited calibration
ne not required (k, ev, izw, zw not required) zw cyclical maintenance (external cyclical
maintenance)
ev periodic self verification izw internal cyclical maintenance
Ve long-term stability recognized g blocked for accredited testing
vlkI! Attention: extended calibration interval
NK! Attention: not calibrated *) next calibration ordered / currently in progress

© CTC advanced GmbH Page 5 of 32

Test report no.: 1-5652/17-01-05-A

7 Sequence of testing

7.1 Sequence of testing radiated spurious 9 kHz to 30 MHz
Setup
 The equipment is set up to simulate normal operation mode as described in the user manual or defined
by the manufacturer.
 If the EUT is a tabletop system, it is placed on a table with 0.8 m height.
 If the EUT is a floor standing device, it is placed directly on the turn table.
 Auxiliary equipment and cables are positioned to simulate normal operation conditions as described in
ANSI C 63.4.
 The AC power port of the EUT (if available) is connected to a power outlet below the turntable.
 Measurement distance is 3 m (see ANSI C 63.4) – see test details.
 EUT is set into operation.

Premeasurement*
 The turntable rotates from 0° to 315° using 45° steps.
 The antenna height is 1 m.
 At each turntable position the analyzer sweeps with positive-peak detector to find the maximum of all
emissions.

Final measurement
 Identified emissions during the pre-measurement are maximized by the software by rotating the turntable
from 0° to 360°.
 Loop antenna is rotated about its vertical axis for maximum response at each azimuth about the EUT.
(For certain applications, the loop antenna plane may also need to be positioned horizontally at the
specified distance from the EUT)
 The final measurement is done in the position (turntable and elevation) causing the highest emissions
with quasi-peak (as described in ANSI C 63.4).
 Final levels, frequency, measuring time, bandwidth, turntable position, correction factor, margin to the
limit and limit will be recorded. A plot with the graph of the premeasurement and the limit is stored.

*)Note: The sequence will be repeated three times with different EUT orientations.

© CTC advanced GmbH Page 9 of 32

Test report no.: 1-5652/17-01-05-A

7.2 Sequence of testing radiated spurious 30 MHz to 1 GHz
Setup
 The equipment is set up to simulate normal operation mode as described in the user manual or defined
by the manufacturer.
 If the EUT is a tabletop system, a table with 0.8 m height is used, which is placed on the ground plane.
 If the EUT is a floor standing device, it is placed on the ground plane with insulation between both.
 Auxiliary equipment and cables are positioned to simulate normal operation conditions as described in
ANSI C 63.4.
 The AC power port of the EUT (if available) is connected to a power outlet below the turntable.
 Measurement distance is 10 m or 3 m (see ANSI C 63.4) – see test details.
 EUT is set into operation.

Premeasurement
 The turntable rotates from 0° to 315° using 45° steps.
 The antenna is polarized vertical and horizontal.
 The antenna height changes from 1 m to 3 m.
 At each turntable position, antenna polarization and height the analyzer sweeps three times in peak to
find the maximum of all emissions.

Final measurement
 The final measurement is performed for at least six highest peaks according to the requirements of the
ANSI C63.4.
 Based on antenna and turntable positions at which the peak values are measured the software maximize
the peaks by changing turntable position ± 45° and antenna height between 1 and 4 m.
 The final measurement is done with quasi-peak detector (as described in ANSI C 63.4).
 Final levels, frequency, measuring time, bandwidth, antenna height, antenna polarization, turntable angle,
correction factor, margin to the limit and limit are recorded. A plot with the graph of the premeasurement
with marked maximum final results and the limit is stored.

© CTC advanced GmbH Page 10 of 32

Test report no.: 1-5652/17-01-05-A

8 Measurement uncertainty

Measurement uncertainty
Test case Uncertainty
Occupied bandwidth ± used RBW
Field strength of the fundamental ± 3 dB
Field strength of the harmonics and spurious ± 3 dB
Receiver spurious emissions and cabinet radiations ± 3 dB
Conducted limits ± 2.6 dB

© CTC advanced GmbH Page 11 of 32

Test report no.: 1-5652/17-01-05-A

11.2 Field strength of the fundamental
Measurement:

The maximum detected field strength for the carrier signal.

Measurement parameters
Detector: Quasi peak / peak (worst case)
Resolution bandwidth: 120 kHz
Video bandwidth: ≥ 3x RBW
Trace mode: Max hold
Used equipment: See chapter 6.2A
Measurement uncertainty: See chapter 8

Limit:

FCC & IC
Frequency Field strength Measurement distance
(MHz) (µV/m) (m)
13.553 to 13.567 15,848 (84 dBµV/m) 30

Recalculation:

According to ANSI C63.10
Frequency Formula Correction value
FSlimit = FSmax 40 log 20log
nearfield
)

FSlimit is the calculation of field strength at the limit distance,
13.56 MHz expressed in dBµV/m
-21.4 from 3m to 30m
FSmax is the measured field strength, expressed in dBµV/m
dnear field is the λ/2π distance
dmeasure is the distance of the measurement point from EUT
dlimit is the reference limit distance

Result:

Field strength of the fundamental
Frequency 13.56 MHz
Distance @3m @ 30 m
Measured / calculated value QP 66.8 dBµV/m 45.4 dBµV/m

© CTC advanced GmbH Page 14 of 32

Test report no.: 1-5652/17-01-05-A

11.3 Field strength of the harmonics and spurious
Measurement:

The maximum detected field strength for the harmonics and spurious.

Measurement parameters
Quasi peak / average or
Detector:
peak (worst case – pre-scan)
F < 150 kHz: 200 Hz
Resolution bandwidth: 150 kHz < F < 30 MHz: 9 kHz
30 MHz < F < 1 GHz: 120 kHz
F < 150 kHz: 1 kHz
Video bandwidth: 150 kHz < F < 30 MHz: 100 kHz
30 MHz < F < 1 GHz: 300 kHz
Trace mode: Max hold
Used equipment: See chapter 6.
Measurement uncertainty: See chapter 8

Limit:

FCC & IC
Frequency Field strength Measurement distance
(MHz) (dBµV/m) (m)
0.009 – 0.490 2400/F(kHz) 300
0.490 – 1.705 24000/F(kHz) 30
1.705 – 30 30 (29.5 dBµV/m) 30
30 – 88 100 (40 dBµV/m) 3
88 – 216 150 (43.5 dBµV/m) 3
216 – 960 200 (46 dBµV/m) 3

Note: For a reduced measurement distance, please take a look at the limit line and the ANSI C63.10-2013
sub clause 6.4 radiated emissions from unlicensed wireless devices below 30 MHz.

Result:

Detected emissions
Frequency Resolution bandwidth Detected value
Detector
(MHz) (kHz) (dBµV/m @ 3m)
All emissions were more than 10 dB below the limit. For emissions between 30 MHz and 1 GHz see result
table below the plots.

© CTC advanced GmbH Page 15 of 32

Test report no.: 1-5652/17-01-05-A

Plot 3: 30 MHz – 1 GHz, vertical and horizontal polarisation

80

70

60

50
Level in dBµV/m

FCC_10m_B

40

30

20

10

0
30M 50 60 80 100M 200 300 400 500 800 1,05G
Frequency in Hz

Final_Result

Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr.
(MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB)
(ms)
40.696 25.58 30.0 4.42 1000 120 98.0 V 180.0 13.3
68.221 24.29 30.0 5.71 1000 120 170.0 V 90.0 10.1
99.594 31.11 33.5 2.39 1000 120 98.0 V 180.0 12.0
122.028 22.73 33.5 10.77 1000 120 170.0 V 180.0 10.1
741.713 19.85 36.0 16.15 1000 120 101.0 V 270.0 22.5
897.615 21.48 36.0 14.52 1000 120 98.0 H 0.0 24.2

© CTC advanced GmbH Page 17 of 32

Test report no.: 1-5652/17-01-05-A

11.4 Conducted limits
Measurement:

Measurement of the conducted spurious emissions for an intentional radiator that is designed to be connected
to the public utility (AC) power line.

Measurement parameters
Quasi peak / average or
Detector:
peak (worst case – pre-scan)
F < 150 kHz: 200 Hz
Resolution bandwidth:
F > 150 kHz: 9 kHz
F < 150 kHz: 1 kHz
Video bandwidth:
F > 150 kHz: 100 kHz
Trace mode: Max hold
Used equipment: See chapter 6.
Measurement uncertainty: See chapter 8

Limit:

FCC & IC
Frequency Quasi-peak Average
(MHz) (dBµV/m) (dBµV/m)
0.15 – 0.5 66 to 56* 56 to 46*
0.5 – 5 56 46
5 – 30.0 60 50

Result:

See result table below the plots.

© CTC advanced GmbH Page 18 of 32

Test report no.: 1-5652/17-01-05-A

Plots:

Plot 1: 150 kHz to 30 MHz, phase line

Premeasurement
Measurement Average limit class B
Quasi peak limit class B
Average level

Phase line Quasi peak level

80.0

70.0

60.0

50.0
Amplitude in dBµV

40.0

30.0

20.0

10.0

0
150.0K 1.0M 10.0M 30.0M

Frequency in Hz

Project ID: 1-5652/17-01-05

Frequency Quasi peak Margin Limit QP Average Margin Limit AV
level quasi peak level average
MHz dBµV dB dBµV dBµV dB dBµV

0.150642 34.43 31.54 65.965 28.54 27.44 55.982
0.897760 23.02 32.98 56.000 13.59 32.41 46.000
2.179667 21.73 34.27 56.000 11.11 34.89 46.000
4.165858 21.40 34.60 56.000 10.22 35.78 46.000
29.620738 23.38 36.62 60.000 12.65 37.35 50.000

© CTC advanced GmbH Page 19 of 32

Test report no.: 1-5652/17-01-05-A

Plot 2: 150 kHz to 30 MHz, neutral line

Premeasurement
Measurement Average limit class B
Quasi peak limit class B
Average level

Neutral line Quasi peak level

80.0

70.0

60.0

50.0
Amplitude in dBµV

40.0

30.0

20.0

10.0

0
150.0K 1.0M 10.0M 30.0M

Frequency in Hz

Project ID: 1-5652/17-01-05

Frequency Quasi peak Margin Limit QP Average Margin Limit AV
level quasi peak level average
MHz dBµV dB dBµV dBµV dB dBµV

0.152920 34.20 31.64 65.840 28.53 27.38 55.917
1.440783 22.91 33.09 56.000 13.37 32.63 46.000
2.462299 21.88 34.12 56.000 10.88 35.12 46.000
2.955702 21.57 34.43 56.000 10.58 35.42 46.000
3.710078 21.57 34.43 56.000 10.31 35.69 46.000

© CTC advanced GmbH Page 20 of 32

Test report no.: 1-5652/17-01-05-A

11.5 Frequency error
Measurement:

The maximum detected field strength for the spurious.

Measurement parameters
Detector: Peak detector
Resolution bandwidth: 10 Hz / 100 Hz
Video bandwidth: > RBW
Trace mode: Max hold
Used equipment: See chapter 6.
Measurement uncertainty: See chapter 8

Limit:

FCC & IC
The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating
frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage,
and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a
temperature of 20 degrees C. (±1.356 kHz)

Carrier frequency stability shall be maintained to ±0.01% (±100 ppm)

Result: Temperature variation

Frequency tolerance
Measured frequency Frequency error
Conditions Result
(MHz) (kHz)
13.560338 -0.07 -40 °C & 100% voltage compliant
13.560398 -0.01 -30 °C & 100% voltage compliant
13.560452 +0.04 -20 °C & 100% voltage compliant
13.560480 +0.07 -10 °C & 100% voltage compliant
13.560485 +0.08 0 °C & 100% voltage compliant
13.560476 +0.07 +10 °C & 100% voltage compliant
13.560424 +0.02 +30 °C & 100% voltage compliant
13.560403 -0.01 +40 °C & 100% voltage compliant
13.560396 -0.01 +50 °C & 100% voltage compliant
13.560410 +0.01 +60 °C & 100% voltage compliant
13.560458 +0.05 +70 °C & 100% voltage compliant
13.560490 +0.08 +80 °C & 100% voltage compliant
13.560566 +0.15 +85 °C & 100% voltage compliant

Result: Voltage variation

Frequency tolerance
Measured frequency Frequency error
Conditions Result
(MHz) (kHz)
13.560408 0.0 +20 °C & 85% voltage compliant
13.560408 0.0 +20 °C & 100% voltage compliant
13.560408 0.0 +20 °C & 115% voltage compliant

© CTC advanced GmbH Page 21 of 32

Test report no.: 1-5652/17-01-05-A

Plots:

Plot 1: -40°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 65.54 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560338000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 10:04:16

Plot 2: -30°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 65.42 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560398000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 10:18:18

© CTC advanced GmbH Page 22 of 32

Test report no.: 1-5652/17-01-05-A

Plot 3: -20°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 65.27 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560452000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 10:31:42

Plot 4: -10°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 65.09 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560480000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 10:46:08

© CTC advanced GmbH Page 23 of 32

Test report no.: 1-5652/17-01-05-A

Plot 5: 0°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 58.33 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560485000 MHz
2Offset -27.8 dB
80.2

A
70

1 PK
VIEW 1
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 10:58:32

Plot 6: +10°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 64.76 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560476000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 11:07:41

© CTC advanced GmbH Page 24 of 32

Test report no.: 1-5652/17-01-05-A

Plot 7: +20°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 64.57 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560455000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 11:18:11

Plot 8: +20°C, 85%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 64.46 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560408000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 09:06:28

© CTC advanced GmbH Page 25 of 32

Test report no.: 1-5652/17-01-05-A

Plot 9: +20°C, 115%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 64.46 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560408000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
MAXH
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 09:06:52

Plot 10: +30°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 64.33 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560424000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 11:34:01

© CTC advanced GmbH Page 26 of 32

Test report no.: 1-5652/17-01-05-A

Plot 11: +40°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 64.09 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560403000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 11:50:36

Plot 12: +50°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 63.89 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560396000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 12:02:08

© CTC advanced GmbH Page 27 of 32

Test report no.: 1-5652/17-01-05-A

Plot 13: +60°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 63.62 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560410000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 12:20:25

Plot 14: +70°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 63.37 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560458000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 12:41:46

© CTC advanced GmbH Page 28 of 32

Test report no.: 1-5652/17-01-05-A

Plot 15: +80°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 63.23 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560490000 MHz
2Offset -27.8 dB
80.2

A
70
1
1 PK
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.56041 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 12:50:22

Plot 16: +85°C, 100%voltage

RBW 10 Hz Marker 1 [T1 ]
VBW 30 Hz 63.04 dBµV
Ref 80.2 dBµV Att 40 dB SWT 5 s 13.560566000 MHz
2Offset -27.8 dB
80.2

A
70

1 PK 1
VIEW
60
LVL

50

40

30

3DB
20

10

0

-10

Center 13.560555 MHz 50 Hz/ Span 500 Hz

Date: 4.JUL.2018 13:04:11

© CTC advanced GmbH Page 29 of 32

Test report no.: 1-5652/17-01-05-A

12 Observations
No observations except those reported with the single test cases have been made.

© CTC advanced GmbH Page 30 of 32

Test report no.: 1-5652/17-01-05-A

Annex A Glossary

EUT Equipment under test
DUT Device under test
UUT Unit under test
GUE GNSS User Equipment
ETSI European Telecommunications Standards Institute
EN European Standard
FCC Federal Communications Commission
FCC ID Company Identifier at FCC
IC Industry Canada
PMN Product marketing name
HMN Host marketing name
HVIN Hardware version identification number
FVIN Firmware version identification number
EMC Electromagnetic Compatibility
HW Hardware
SW Software
Inv. No. Inventory number
S/N or SN Serial number
C Compliant
NC Not compliant
NA Not applicable
NP Not performed
PP Positive peak
QP Quasi peak
AVG Average
OC Operating channel
OCW Operating channel bandwidth
OBW Occupied bandwidth
OOB Out of band
DFS Dynamic frequency selection
CAC Channel availability check
OP Occupancy period
NOP Non occupancy period
DC Duty cycle
PER Packet error rate
CW Clean wave
MC Modulated carrier
WLAN Wireless local area network
RLAN Radio local area network
DSSS Dynamic sequence spread spectrum
OFDM Orthogonal frequency division multiplexing
FHSS Frequency hopping spread spectrum
GNSS Global Navigation Satellite System
C/N0 Carrier to noise-density ratio, expressed in dB-Hz

© CTC advanced GmbH Page 31 of 32

Document Created: 2018-10-05 11:40:26
Document Modified: 2018-10-05 11:40:26

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC