User Manual

FCC ID: QZ3BAHA5SUP

Users Manual

Download: PDF

FCCID_2809924

1 2 12
7

2
9 4
8
4
8 1 2
1 2

1 3 13

1 2 3 4
6
5 3

3 14

4 5 6 7

1 2 3 4

15 16

8 9

1 2 3 4

17

1 2 1 2 1

10 11

2 3 4 5
1

18

1 2
2 3 1 2

English

Welcome
Congratulations on your choice of the Cochlear™ Baha® 5 SuperPower Sound Processor.
You are now ready to use Cochlear’s highly advanced bone conduction sound processor,
featuring sophisticated signal processing and wireless technology.
This manual is full of tips and advice on how to best use and care for your Baha sound
processor. By reading this manual and then keeping it handy for future reference, you
will ensure that you get the most benefit out of your Baha sound processor.

Key to device See figure 1 Introduction
1. Sound Processing unit To ensure optimal performance, your hearing
2. Actuator unit care professional will fit the processor to suit
3. Cable your needs. Be sure to discuss any questions
4. Microphones or concerns that you may have regarding your
5. Battery hearing or use of this system with your hearing
6. Ear hook care professional.
7. Plastic snap connector
8. Buttons
Warranty
9. Visual indicator The warranty does not cover defects or
damage arising from, associated with, or
Note on figures: The figures included on the related to the use of this product with any
cover correspond to information specific to this non-Cochlear processing unit and/or any
model of sound processor. Please reference the non-Cochlear implant. See the “Cochlear
appropriate figure when reading. The images Baha Global Limited Warranty card” for
shown are not to scale.
more details.

3

English

Key to symbols Contacting Customer Service Your sound processor is programmed to be used as
either a left or right-sided device. Your hearing care
The following symbols will be used throughout this document. We strive to provide you with the best possible
professional will have marked your processor(s)
Please refer to the list below for explanations: products and services. Your views and experiences
with a L or R indicator. If you are a bilateral user,
with our products and services are important to
changes you make to one device will automatically
us. If you have any comments you would like to
apply to the second device.
“Consult instructions for use” share, please contact us.
Bluetooth® Smart
or “Operating instructions” On/off See figure 2
Customer Service – Cochlear Americas
“Caution” or “Caution, consult 13059 E. Peakview Avenue, 1 2
Turn on your sound processor by
Manufacturer
accompanying documents” Centennial, CO 80111, USA connecting the battery module.
Toll free (North America) 1800 523 5798 3 T urn off your sound processor by disconnecting
Audible signal REF Catalogue number Tel: +1 303 790 9010, Fax: +1 303 792 9025 the battery.
E-mail: customer@cochlear.com
When your sound processor is turned off and then
CE-mark Date of manufacture Customer Service – Cochlear Europe back on again, it will return to the default setting
6 Dashwood Lang Road (program one).
Bourne Business Park, Addlestone,
Interference risk By prescription Audible and visual status indicators
Surrey KT15 2HJ, United Kingdom
See figure 3
Tel: +44 1932 26 3400, Fax: +44 1932 26 3426
Batch Code Temperature limitation Your sound processor is equipped with audible and
E-mail: info@cochlear.co.uk
visual indicators. For an overview of the audible
Customer Service – Cochlear Asia Pacific and visual indicators, refer to the table at the back
Serial Number Humidity limitation 1 University Avenue, Macquarie University of this section.
NSW 2109, Australia
Your hearing care professional can disable the
Toll free (Australia) 1800 620 929 audible and/or visual indicators if you prefer.
Refer to instructions/booklet. Toll free (New Zealand) 0800 444 819
Recyclable material
Note: Symbol is blue.
Tel: +61 2 9428 6555, Fax: +61 2 9428 6352 Changing the program See figure 4
or Toll free Fax 1800 005 215 Together with your hearing care professional you
ACMA (Australian E-mail: customerservice@cochlear.com.au will have selected up to four pre-set programs for
Separate disposal of electronic your sound processor:
Communications and Media
device
Authority) compliant Using your sound processor Program 1:
The buttons on your sound processor let you
adjust your volume level, choose from your Program 2:
Made for iPod, iPhone, iPad Do not re-use
pre-set programs, and enable/disable wireless Program 3:
streaming. You can choose to enable the audible
and visual indicators to alert you of changes to the Program 4:
settings and processor status.
Model: Baha® 5 SuperPower
FCC ID: QZ3BAHA5SUP, IC: 8039C-BAHA5SUP Product name, CE mark and ACMA symbol

4 5

English

These programs are suitable for different listening Made for iPhone (MFI) Batteries The rechargeable battery’s lifespan is at least 365
environments. Ask your hearing care professional Your sound processor is a Made for iPhone (MFi) There are two different batteries for the charge cycles. A completely empty rechargeable
to fill in your specific programs. hearing device. This allows you to control your Baha 5 SuperPower: the Standard Rechargeable battery will take approximately four hours to
sound processor and stream audio directly from Battery Module and the Compact Rechargeable recharge.
To switch programs, press and hold the upper
button on your sound processor. If enabled, iPhone, iPad or iPod touch. Ask your hearing care Battery Module. Ask your hearing care Rechargeable batteries may take longer to fully
audible and visual indicators will let you know professional or visit: professional for more information about the recharge with age. To get the longest life from the
which program you are using: www.cochlear.com for more information. choice of battery. rechargeable batteries, always recharge before use.
Program 1: 1 beep and 1 flash Wireless accessories Battery life When there is approximately one hour of battery
Program 2: 2 beeps and 2 flashes You can use Cochlear Wireless accessories to power remaining, you will hear an audio indicator
Batteries should be replaced as needed just as you
Program 3: 3 beeps and 3 flashes enhance your listening experience. Ask your comprising of two sets of four short beeps, and
would with any other electronic device. Battery
Program 4: 4 beeps and 4 flashes hearing care professional to learn more about the visual indicator will flash repeatedly. At this
life varies according to the programs used each
your options or visit www.cochlear.com. time you may experience low amplification. If
Changing volume settings day, the sound environment, and the size of
the battery runs down completely, the sound
battery.
See figure 5 To activate wireless audio streaming, press processor will beep and then stop working.
1 Press and release the upper button to increase and hold the lower button until you hear a
volume. melody. See figure 7
To end wireless audio streaming, press and
2
Press and release the lower button to decrease hold the upper button. The sound processor will
volume. return to the previous program.
You can also adjust the volume level with the Flight mode See figure 8
optional Cochlear Baha Remote Control, the Mains power light What it means
Cochlear Wireless Phone Clip or an iOS device When boarding a flight, wireless functionality
(see Made for iPhone section). must be deactivated because radio signals may
not be transmitted during flights. To disable Battery charger power is on.
Steady green
Using the telephone See figure 6 wireless operation:
For best results when talking on the telephone, 1 T urn off the sound processor by disconnecting Does not light up Power adaptor is not plugged in or mains power is not available
place the receiver near the microphone inlet of the battery. (or, if switched, is not turned on).
your sound processor instead of near your ear.
Make sure the receiver does not touch the sound 2 P ress and hold the lower button and connect
processor, as this may cause feedback. the battery at the same time. Battery socket light What it means
Your sound processor is a Made for iPhone® To deactivate flight mode, turn the sound
hearing device (MFi). This lets you connect your processor off and back on again by disconnecting Battery module is charging.
sound processor directly with a compatible and connecting the battery. Steady orange
iPhone. When connected, you can stream audio
directly from your iPhone to your sound processor. Battery module is fully charged.
To stream wirelessly from other mobile and Steady green
cordless phones you can use the optional Cochlear
Wireless Phone Clip. You will need to check the There is a problem with the battery module. Try a different socket.
compatibility of your phone with this product. Flashing orange Replace the rechargeable battery module.

Does not light up Battery module is not properly placed, is over-discharged or there is
no power. Check the battery charger is powered on and reconnect the
battery charger. If it still does not light up, replace the battery module.

6 7

English

Replace the battery Water, sand and dirt See figure 11 Wear a Snugfit Attach and remove processor covers
Remove the battery See figure 2 Your sound processor is resistant to water, sand The Snugfit holds your sound processor more See figure 15
Twist the battery module to remove it from the and dust. However, it is still a precision electronic securely in place than an earhook alone. It gives 1 To attach, slide the cover onto the processor.
processing unit. device so the following precautions should be carers easy access to controls and accessories and
taken. is available in large, medium and tamper resistant 2 To remove, pull the cover away from the
Attach the battery See figure 2 (small). processor.
Align the battery module to the processor socket 1 If your processor ever gets wet, dry it with a
to fit the parts together. Twist the battery module soft cloth, change the microphone protectors Attach a Snugfit See figure 13 Note: Snugfit, Mic Lock, and Processor covers are
as shown to attach the parts. The processor will and place it in the dry aid kit provided by 1 Press firmly on the top of the earhook with available as accessories. For more information,
turn on automatically. Cochlear for 8 hours. your thumb to click it off the sound processor. ask your hearing care professional or visit www.
cochlear.com
Lock/Unlock the battery See figure 9 2 If sand or dirt ever enter the processor, shake 2 Click your Snugfit into place
1 To increase tamper resistance, push the lock to the components carefully to remove it and Replace microphone protectors
change the microphone protectors.
3 Carefully bend the lower part into shape to suit See figure 16
the far left with your battery cover locking tool your ear.
to lock the battery module. Using Share the Experience Replace your microphone protectors every
Remove a Snugfit three months, whenever they look dirty or
2
Push the lock to the far right to unlock the See figure 12
4 Remove your Snugfit by clicking it off the whenever you notice any loss in sound
battery module. Family members and friends can “share the
processor. quality. Always replace both microphone
experience” of bone conduction hearing. The test
Charge battery modules See figure 10 rod can be used by others to hear with the sound Wear a Mic Lock See figure 14 protectors at the same time.
1 Angle and fit the rechargeable battery module processor. The Mic Lock helps hold the processor securely on
into a socket on the Cochlear Nucleus® Battery the ear. Remove microphone protectors
Charger. To use the test rod: 1
Remove the protective cap from the
1 Turn on your sound processor and snap the To attach the Mic Lock the first time: Microphone Protector Removal Tool.
2 Twist clockwise to connect. Actuator unit onto the test rod using the tilt 1 Push the Mic Lock band onto the processor
3 Connect the battery charger to the power technique. with the tubing facing forward. 2
Push the tip of the tool into the middle of the
adaptor and plug into mains power. microphone protector.
2
Place the Sound Processing unit on the ear. 2 Place the processor on your ear and bring the
Hold the rod against the skull bone behind an tubing up to the earhook. 3 Turn the tool 90° clockwise
General processor care ear. Plug both ears and listen.
Your Baha sound processor is a delicate electronic 3 Trim the tubing to a length that will hold the 4 Lift out the microphone protector and discard.
device. Follow these guidelines to keep it in proper Note: Your hearing care professional may have processor firmly in place without discomfort. Repeat steps 2 to 4 to remove the other micro-
working order: disabled some or all of the audible and/or visible Do not cut it too short. phone protector.
indicators.
• When not in use, turn off your sound processor 4 Soften the end of the tubing in warm water
and store it free from dust and dirt. and push it onto the tip of your earhook.

• If you will not be using your sound processor 5 Let the tubing cool before wearing
for a long period, remove the battery. Remove
your sound processor before applying hair
conditioners, mosquito repellent and or similar
products

8 9

English

Insert new microphone protectors Change the earhook See figure 18 • Contains small parts that may present a choking • For wireless functionality, only use Cochlear
See figure 17 hazard. Wireless accessories. For further guidance
Earhooks come in large, medium and small • This product is not suitable for use in flammable regarding e.g. pairing, please refer to the
1 the Microphone Protector Applicator out
Pull sizes. The smallest earhook can be made tamper and/or explosive environments. user guide of the relevant Cochlear Wireless
of its sleeve. resistant. • If you are to undergo an MRI (Magnetic accessory.
2
With the microphone protectors facing the 1 Press firmly on the top of the earhook with Resonance Imaging) procedure, refer to the MRI • No modification of this equipment is allowed.
processor, gently push the slotted end of the your thumb and click it off the sound processor Reference Card included in the document pack. • Parents and carers are advised that unsupervised
applicator under the coil cable plug. • Portable and mobile RF (radio frequency) use of long cables may present a risk of
2 Click the earhook into place communications equipment can affect the strangulation.
3 the applicator over the processor,
Lay performance of your sound processor. • Do not let your processor or parts entangle
Note: Remove your earhook only when necessary
aligning the microphone protectors with the • The sound processor is suitable for use in with any jewellery (e.g. earhook and earrings) or
– it may become loose if it is removed too often.
microphones. electromagnetic environments with mains machinery.
4
Press the microphone protectors all the way Warnings power of typical commercial or hospital quality, • Do not attach or wear a body-worn battery
into the microphone holes one at a time. and power frequency magnetic fields of typical configuration beneath layers of clothing in direct
General advice
commercial or hospital levels. It is intended contact with the skin (e.g. in pocket or under a
A sound processor will not restore normal
5
Remove the applicator carefully, peeling it for use in an electromagnetic child’s vest).
hearing and will not prevent or improve a hearing
upwards from the earhook end. environment in which radiated RF • Make sure all cables used by a child are securely
impairment resulting from organic conditions.
(radio frequency) disturbances are attached to their clothing.
• Infrequent use of a sound processor may not
Care for your battery charger enable a user to attain full benefit from it.
controlled. • Do not use a dry aid kit that has an Ultra Violet C
• Interference may occur in the vicinity of (UVC) lamp
Every day • The use of a sound processor is only part of hear-
equipment with the symbol to the right. • The microphone protector removal tool is a
Check that your battery charger is clean. If you ing rehabilitation and may need to be supple-
• Dispose of batteries and electronic items in sharp object. It is not recommended for use by
notice any dust or dirt: mented by auditory and lip reading training.
accordance with your local regulations. children.
• The patient is an intended operator of the device.
1
Unplug the power adaptor and remove any • Discard your device as electronic waste according • The tamper resistant earhook fitting tool and
• The Model reference is Baha 5 SuperPower
battery modules. to local regulations. fitting pin are sharp objects. They are not
Sound Processor.
• When the wireless function is activated, the recommended for use by children
2
Hold the battery charger upside down and tap
Warnings sound processor uses low-powered digitally • Only use rechargeable batteries and battery
it gently to remove any dirt from the battery
• The sound processor is a digital, electrical, coded transmissions in order to communicate chargers supplied or recommended by Cochlear.
charger sockets. Carefully blowing on the
medical instrument designed for specific use. As with other wireless devices. Although unlikely, Use of other batteries or battery chargers may
battery charger sockets may also help remove
such, due care and attention must be exercised nearby electronic devices may be affected. In result in harm or injury.
dirt.
by the user at all times. that case, move the sound processor away from • Charge rechargeable batteries before use.
3
Wipe the battery charger sockets with a soft • The sound processor is not waterproof! the affected electronic device. • Do not allow children to replace batteries
dry cloth. • Never wear it in heavy rain, in the bath or • When using wireless functionality and the without adult supervision.
shower! sound processor is affected by electromagnetic • Do not touch the battery charger contacts or
Cycle batteries in different sockets when
• Do not expose the sound processor interference, move away from the source of this allow children to use the battery charger without
recharging to wear the sockets evenly. +50 °C
to extreme temperatures. It (+122 °F) interference. adult supervision.
If it gets wet is designed to operate within • Be sure to deactivate wireless functionality when • Do not short-circuit batteries (e.g. do not let
If the battery charger ever gets splashed with the temperature ranges +5 °C boarding flights. terminals of batteries contact each other, do not
liquid, carefully shake out the liquid and dry the (+41 °F) to +40 °C (+104 °F). • Turn off your wireless functionality by using place batteries loose in pockets, etc.).
battery charger for 24 hours. Do not use the The processor should not the flight mode in areas where radio frequency • Store unused batteries in original packaging, in
battery charger until it is dry. be subjected, at any time, -10 °C
(14 °F)
emission is prohibited. a clean and dry place. When processor is not in
to temperatures below • Cochlear Baha wireless devices include an use, remove the batteries and store separately
-10 °C (14 °F) or above +50 °C (+122 °F). RF transmitter that operates in the range of in a clean and dry place. Wipe batteries with a
2.4 GHz–2.48 GHz. clean dry cloth if they become dirty.

10 11

English

• Battery life means the time a device will run • Use only Baha 5 SuperPower Actuator units. Do Sound processor type designations for models cochlea, which improves hearing performance.
before the rechargeable batteries must be not connect the sound processor to any other included in this User Manual are:
recharged. type of stimulating equipment such as Cochlear FCC ID: QZ3BAHA5SUP, IC: 8039C-BAHA5SUP, IC model:
• Battery charge cycle is a full charge and Implant coils. Baha®5 SUP. List of countries:
discharge of the rechargeable battery. Not all products are available in all markets. Product
Statement: availability is subject to regulatory approval in the
• Battery lifespan means the total number of This device complies with Part 15 of the FCC Rules. respective markets.
charge cycles a rechargeable battery will last Operation is subject to the following two conditions: The products are in compliance with the following
before the battery life degrades to 80% of its (1) this device may not cause harmful interference, and regulatory requirements:
original fullycharged capacity. (2) this device must accept any interference received, • In EU: the device conforms to the Essential
including interference that may cause undesired Requirements according to Annex I of Council Directive
operation. 93/42/EEC for medical devices (MDD) and essential
Functions and audible/visible indicators Note: This equipment has been tested and found to requirements and other relevant provisions of Directive
comply with the limits for a Class B digital device, 1999/5/EC (R&TTE). The declaration of conformity
Function On the device Audible indicator Visible indicator pursuant to part 15 of the FCC Rules. These limits are may be consulted at www.cochlear.com.
designed to provide reasonable protection against harmful • Other identified applicable international regulatory
Turn ON Connect battery 10 beeps 10 flashes requirements in countries outside the EU and US.
interference in a residential installation. This equipment
Turn OFF Disconnect battery None generates, uses and can radiate radio frequency energy Please refer to local country requirements for these
and, if not installed and used in accordance with the areas.
Change program Press and hold upper button 1 beep for program 1 1 flash for program 1 instructions, may cause harmful interference to radio • In Canada the sound processor is certified under the
2 beeps for program 2 etc 2 flashes for program 2 communications. However, there is no guarantee that following certification number: IC: 8039C-BAHA5SUP
etc interference will not occur in a particular installation. If and model no.: IC model: Baha®5 SUP.
Change Volume Press and release upper/ 1 beep indicates volume 1 flash indicates volume this equipment does cause harmful interference to radio • This device complies with Industry Canada licence-
lower button to increase/ increase/decrease increase/decrease or television reception, which can be determined by exempt RSS standard(s).
decrease volume turning the equipment off and on, the user is encouraged • This Class B digital apparatus complies with Canadian
Low battery warning 4 beeps 2 times Rapid flashes to try to correct the interference by one or more of the ICES-003. Cet appareil numérique de la classe B est
following measures: conforme à la norme NMB-003 du Canada.
When using Cochlear Wireless Accessory or MFi • Reorient or relocate the receiving antenna. • Operation is subject to the following two conditions:
• Increase the separation between the equipment and (1) this device may not cause interference, and (2)
Change volume With Cochlear Baha Remote 1 beep indicates volume 1 short flash indicates
receiver. this device must accept any interference, including
Control, Cochlear Wireless increase/decrease volume increase/decrease
• Connect the equipment into an outlet on a circuit interference that may cause undesired operation
Phone Clip or with an iPhone
different from the one in which the receiver is of the device. L’exploitation est autorisée aux deux
Volume limit reached 1 long beep 1 long flash conditions suivantes : (1) l’appareil ne doit pas produire
connected.
• Consult the dealer or an experienced radio/TV de brouillage, et (2) l’utilisateur de l’appareil doit
Enable wireless Press and hold lower button 5 beeps (melody in 1 long flash, followed by
audio streaming upward scale) 1, 2 or 3 short flashes technician for help. accepter tout brouillage radioélectrique subi, même
• Changes or modifications can void the user’s authority si le brouillage est susceptible d’en compromettre le
Disable wireless Press and hold upper button 1 beep for program 1 1,2 or 3 short flashes
to operate the equipment. fonctionnement.
audio streaming 2 beeps for program 2 etc
Pairing confirmation 5 beeps (melody in None Intended use Equipment includes RF transmitter
upward scale) The Cochlear™ Baha® 5 SuperPower Sound Processor
Toggle between Long press lower button 5 beeps (melody in Long flash, followed by (Baha 5 SUP) uses bone conduction to transmit sounds
wireless accessories upward scale) one short flash to the cochlea (inner ear). It works by combining a sound
Turn ON flight mode Insert battery and hold 10 beeps 2 times 4 double flashes processor and a small
lower button titanium implant that is placed in the skull behind the
Mute Mute button on Wireless 1 long beep 1 long flash ear. The skull bone integrates with the titanium implant
Accessory or with an iPhone through a process called osseointegration. This allows
sound to be conducted via the skull bone directly to the
Note: Your hearing care professional may have disabled some or all of the audible and/or visible indicators.

12 13

Document Created: 2015-09-14 13:55:35
Document Modified: 2015-09-14 13:55:35

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC