RF Exposure

FCC ID: QYLS400

RF Exposure Info

Download: PDF
FCCID_1347662

RF Exposure Evaluation Report Report No. : FA081715-02B RF Exposure Evaluation Report APPLICANT : Getac Technology Corporation EQUIPMENT : Notebook PC BRAND NAME : Getac MODEL NAME : S400 FCC ID : QLYS400 FILING TYPE : Certification STANDARD : OET Bulletin 65 Supplement C (Edition 01-01) The product was integrated the WLAN Module (Brand Name: Intel / Model Name: 622ANHMW, FCC ID: PD9622ANH) during the test. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with FCC OET Bulletin 65 Supplement C (Edition 01-01). The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Roy Wu / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 1 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B Table of Contents REVISION HISTORY.......................................................................................................................................... 3 1. RF EXPOSURE INTRODUCTION ............................................................................................................... 4 2. ADMINISTRATION DATA ........................................................................................................................... 6 2.1 Testing Laboratory ............................................................................................................................. 6 2.2 Applicant ............................................................................................................................................ 6 2.3 Manufacturer ...................................................................................................................................... 6 3. GENERAL INFORMATION ......................................................................................................................... 7 3.1 Description of Device Under Test (DUT) ........................................................................................... 7 4. RF EXPOSURE EVALUATION ................................................................................................................... 8 4.1 Radio Frequency Radiation Exposure Evaluation ............................................................................. 8 SPORTON INTERNATIONAL INC. Page Number : 2 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA081715-02B Rev. 01 Initial issue of report Sep. 16, 2010 SPORTON INTERNATIONAL INC. Page Number : 3 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B 1. RF Exposure Introduction Requirements Three different categories of transmitters are defined by the FCC in OET Bulletin 65. These categories are fixed installation, mobile and portable and are defined as follows:  Fixed installation: Fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, distance to humans form the antenna is maintained to at least 2 meters.  Mobile Devices: A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitters’s radiating structures and the body of the user or nearby persons. Transmitters designed to be used by consumers or workers that can be easily re-located are considered mobile devices if they meet the 20 centimeter separation requirement. The FCC rules for evaluating mobile devices for RF compliance are found in 47 CFR 2.1091.  Portable Devices: A portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable device requirements are found in Section 2.1093 of the FCC’s Rules (47 CFR 2.1093) SPORTON INTERNATIONAL INC. Page Number : 4 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B The FCC also categorizes the use of the device as based upon the user’s awareness and ability to exercise control over his or her exposure. The two categories defined are Occupational/Controlled Exposure and General Population/Uncontrolled Exposure. These two categories are defined as follows:  Occupational/controlled Exposure: In general, occupational/controlled exposure limits are applicable to situation in which persons are exposed as a consequence of their employment, who have been made fully aware of the potential for exposure. Awareness of the potential for RF exposure in a workplace or similar environment can be provided through specific training as part of a RF safety program. If appropriate, warning signs and labels can also be used to establish such awareness by providing prominent information on the risk of potential exposure and instructions on methods to minimize such exposure risks.  General Population/Uncontrolled Exposure: The general population / uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Members of the general public would come under this category when exposure is not employment-related; for example, in the case of a wireless transmitter that exposes persons in its vicinity. Warning labels placed on low-power consumer devices such as cellular telephones are not considered sufficient to allow the device to be considered under the occupational/controlled category and the general population/uncontrolled exposure limits apply to these devices. SPORTON INTERNATIONAL INC. Page Number : 5 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B 2. Administration Data 2.1 Testing Laboratory Test Site SPORTON INTERNATIONAL INC. st No. 52, Hwa Ya 1 Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Test Site Location TEL: +886-3-327-3456 FAX: +886-3-328-4978 2.2 Applicant Company Name Getac Technology Corporation Address 5F., Building A, No. 209, Sec. 1, Nangang Rd., Nangang Dist., Taipei City 11568, Taiwan, R.O.C. 2.3 Manufacturer Company Name GeTAC Technology(Kunshan)Co., LTD. Address No. 269, 2nd Road, Export Processing Zone, Changjiang South Road, Kunshan, Jiangsu, P.R.C. SPORTON INTERNATIONAL INC. Page Number : 6 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B 3. General Information 3.1 Description of Device Under Test (DUT) Product Feature & Specification DUT Type Notebook PC Brand Name Getac Model Name S400 FCC ID QLYS400 802.11b/g/n : 2400 MHz ~ 2483.5 MHz Tx Frequency 802.11a/n : 5150 MHz ~ 5350 MHz; 5470 MHz ~ 5725 MHz; 5725 MHz ~ 5850 MHz 802.11b/g/n : 2400 MHz ~ 2483.5 MHz Rx Frequency 802.11a/n : 5150 MHz ~ 5350 MHz; 5470 MHz ~ 5725 MHz; 5725 MHz ~ 5850 MHz Antenna Type PIFA Antenna HW Version R0B SW Version R005J 802.11b : DSSS Type of Modulation 802.11a/g/n : OFDM DUT Stage Identical Prototype Remark: The above DUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. SPORTON INTERNATIONAL INC. Page Number : 7 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B 4. RF Exposure Evaluation 4.1 Radio Frequency Radiation Exposure Evaluation According to 1.1310 of the FCC rules, the power density limit for General Population/Uncontrolled 2 2 Exposure is f/1500 mW/cm for 300 MHz to 1500 MHz and 1.0 mW/cm for 1500 MHz to 100000 MHz. As this is a mobile application the MPE shall be calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna For this device, the calculation is as follows: Wireless LAN operated in IEEE 802.11b mode (Tx/Rx: 2400~2483.5MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 1 2412 -3.80 0.42 16.02 39.99 0.003 1.00 6 2437 -3.80 0.42 16.14 41.11 0.003 1.00 11 2462 -3.80 0.42 15.96 39.45 0.003 1.00 Wireless LAN operated in IEEE 802.11g mode (Tx/Rx: 2400~2483.5MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 1 2412 -3.80 0.42 14.69 29.44 0.002 1.00 6 2437 -3.80 0.42 16.11 40.83 0.003 1.00 11 2462 -3.80 0.42 13.97 24.95 0.002 1.00 SPORTON INTERNATIONAL INC. Page Number : 8 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B Wireless LAN operated in IEEE 802.11n (BW 20MHz) mode (Tx/Rx: 2400~2483.5MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 1 2412 -3.80 0.42 14.13 25.88 0.002 1.00 6 2437 -3.80 0.42 16.12 40.93 0.003 1.00 11 2462 -3.80 0.42 14.12 25.82 0.002 1.00 Wireless LAN operated in IEEE 802.11n (BW 40MHz) mode (Tx/Rx: 2400~2483.5MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 3 2422 -3.80 0.42 11.74 14.93 0.001 1.00 6 2437 -3.80 0.42 15.97 39.54 0.003 1.00 9 2452 -3.80 0.42 11.67 14.69 0.001 1.00 Wireless LAN operated in IEEE 802.11a mode (Tx/Rx: 5150~5250MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 36 5180 -4.00 0.40 15.84 38.37 0.003 1.00 48 5240 -4.00 0.40 15.60 36.31 0.003 1.00 Wireless LAN operated in IEEE 802.11n (BW 20MHz) mode (Tx/Rx: 5150~5250MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 36 5180 -4.00 0.40 16.06 40.36 0.003 1.00 48 5240 -4.00 0.40 16.05 40.27 0.003 1.00 SPORTON INTERNATIONAL INC. Page Number : 9 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B Wireless LAN operated in IEEE 802.11n (BW 40MHz) mode (Tx/Rx: 5150~5250MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 38 5190 -4.00 0.40 16.11 40.83 0.003 1.00 46 5230 -4.00 0.40 15.89 38.82 0.003 1.00 Wireless LAN operated in IEEE 802.11a mode (Tx/Rx: 5250~5350MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 52 5260 -4.00 0.40 15.82 38.19 0.003 1.00 64 5320 -4.00 0.40 15.93 39.17 0.003 1.00 Wireless LAN operated in IEEE 802.11n (BW 20MHz) mode (Tx/Rx: 5250~5350MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 52 5260 -4.00 0.40 15.72 37.33 0.003 1.00 64 5320 -4.00 0.40 15.92 39.08 0.003 1.00 Wireless LAN operated in IEEE 802.11n (BW 40MHz) mode (Tx/Rx: 5250~5350MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 54 5270 -4.00 0.40 15.72 37.33 0.003 1.00 62 5310 -4.00 0.40 15.95 39.36 0.003 1.00 SPORTON INTERNATIONAL INC. Page Number : 10 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B Wireless LAN operated in IEEE 802.11a mode (Tx/Rx: 5470~5725MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 100 5500 -4.00 0.40 16.08 40.55 0.003 1.00 120 5600 -4.00 0.40 15.96 39.45 0.003 1.00 140 5700 -4.00 0.40 15.61 36.39 0.003 1.00 Wireless LAN operated in IEEE 802.11n (BW 20MHz) mode (Tx/Rx: 5470~5725MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 100 5500 -4.00 0.40 16.02 39.99 0.003 1.00 120 5600 -4.00 0.40 15.70 37.15 0.003 1.00 140 5700 -4.00 0.40 16.09 40.64 0.003 1.00 Wireless LAN operated in IEEE 802.11n (BW 40MHz) mode (Tx/Rx: 5470~5725MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 102 5510 -4.00 0.40 16.17 41.40 0.003 1.00 118 5590 -4.00 0.40 16.01 39.90 0.003 1.00 134 5670 -4.00 0.40 16.02 39.99 0.003 1.00 Wireless LAN operated in IEEE 802.11a mode (Tx/Rx: 5745~5850MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 149 5745 -4.00 0.40 15.28 33.73 0.003 1.00 157 5785 -4.00 0.40 16.08 40.55 0.003 1.00 165 5825 -4.00 0.40 16.28 42.46 0.003 1.00 SPORTON INTERNATIONAL INC. Page Number : 11 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400

RF Exposure Evaluation Report Report No. : FA081715-02B Wireless LAN operated in IEEE 802.11n (BW 20MHz) mode (Tx/Rx: 5745~5850MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 149 5745 -4.00 0.40 15.72 37.33 0.003 1.00 157 5785 -4.00 0.40 15.77 37.76 0.003 1.00 165 5825 -4.00 0.40 15.90 38.90 0.003 1.00 Wireless LAN operated in IEEE 802.11n (BW 40MHz) mode (Tx/Rx: 5745~5850MHz): Peak Peak Calculated Channel Frequency Antenna Antenna Output Output RF Limit Gain Gain 2 Number (MHz) Power Power Exposure (mW/cm ) (dBi) (numeric) 2 (dBm) (mW) (mW/cm ) 151 5755 -4.00 0.40 15.79 37.93 0.003 1.00 159 5795 -4.00 0.40 16.01 39.90 0.003 1.00 Based on the above calculation at 20 cm the Notebook PC is below the Power Density limit. SPORTON INTERNATIONAL INC. Page Number : 12 of 12 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : QLYS400


Document Created: 2010-09-16 20:10:24
Document Modified: 2010-09-16 20:10:24
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC