Cover Letter - Modular Approval Request

FCC ID: QYLPS336R

Cover Letter(s)

Download: PDF

FCCID_1845409

FCC ID: QYLPS336R

Modular Approval Request Letter

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

November 8, 2012

Dear Application Examiner,

We, Getac Technology Corporation,, claim that the EUT, FCC ID: QYLPS336R is a
RFID module and would like to have your authorization as a limited modular approval specific to
the tested host Getac PDA model:PS336.

The requirements of section 15.212 of FCC rules have been met and shown on the following
statements.
1. “The modular transmitter must have its own RF shielding.” The radio portion of this
module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has
buffered data input, it is integrated in chip TRF796x and MSP430.

3. “The modular transmitter must have its own power supply regulation.” The part number
of this regulator is MSP430.

4. “The modular transmitter must comply with the antenna requirements of section 15.203
and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission,
unique antenna connector and photo of antennas are shown in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration”. The EUT was
tested inside a specific platform. Please see section Photographs of Test Configuration
in the test report, the EUT is for limited modular approval for this specific platform.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please see
exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users
Manual, there are instructions give to the OEM on how to label the end product.

Document Created: 2019-10-11 18:32:46
Document Modified: 2019-10-11 18:32:46

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC