Test Report

FCC ID: QYLPN7462A

Test Report

Download: PDF
FCCID_4404304

FCC Test Report Report No. : FR6D2154-31AR FCC Test Report FCC ID : QYLPN7462A Equipment : RFID module Brand Name : infoThink Model Name : PN7462 Applicant : Getac Technology Corporation. 5F., Building A, No. 209, Sec.1, Nangang Rd.,Nangang Dist., Taipei City 11568, Taiwan, R.O.C. Standard : 47 CFR FCC Part 15.225 The product was received on Jul. 03, 2019, and testing was started from Jul. 03, 2019 and completed on Jul. 04, 2019. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2013 and shown compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of United States government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. ___________________________________________ __________________________________________ Approved by: Allen Lin SDoC by: XXXXX SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 1 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR Table of Contents HISTORY OF THIS TEST REPORT .................................................................................................................. 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 7 1.3 Testing Location Information .................................................................................................................. 7 1.4 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION OF EUT......................................................................................................... 8 2.1 Test Condition ........................................................................................................................................ 8 2.2 The Worst Case Modulation Configuration ............................................................................................ 8 2.3 Test Channel Frequencies Configuration ............................................................................................... 8 2.4 The Worst Case Measurement Configuration ........................................................................................ 9 2.5 Support Equipment ...............................................................................................................................10 2.6 Test Setup Diagram .............................................................................................................................11 3 TRANSMITTER TEST RESULT ..........................................................................................................12 3.1 AC Power-line Conducted Emissions ..................................................................................................12 3.2 Emission Bandwidth .............................................................................................................................16 3.3 Field Strength of Fundamental Emissions and Spectrum Mask ..........................................................18 3.4 Transmitter Radiated Unwanted Emissions .........................................................................................20 3.5 Frequency Stability ...............................................................................................................................31 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................33 Appendix A. Test Photos Photographs of EUT V01 TEL : 886-3-327-3456 Page Number : 2 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR History of this test report Report No. Version Description Issued Date FR6D2154-31AR 01 Initial issue of report Aug. 16, 2019 TEL : 886-3-327-3456 Page Number : 3 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR Summary of Test Result Report Ref. Std. Result Test Items Remark Clause Clause (PASS/FAIL) 1.1.2 15.203 Antenna Requirement FCC 15.203 PASS 3.1 15.207 AC Power-line Conducted Emissions PASS FCC 15.207 3.2 15.215(c) Emission Bandwidth Fall in band PASS FL ≥ 13.553 MHz FH ≤ 13.567 MHz 3.3 15.225(a)~(d) Field Strength of Fundamental Emissions 124 dBuV/m at 3m PASS and Spectrum Mask 3.4 15.225(d) Transmitter Radiated Unwanted Emissions PASS FCC 15.209 3.5 15.225(e) Frequency Stability PASS ± 0.01% (100ppm) Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and explanations: None Reviewed by: Jackson Tsai Report Producer: Jenny Yang TEL : 886-3-327-3456 Page Number : 4 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 1 General Description 1.1 Information 1.1.1 RF General Information RF General Information Ch. Frequency Field Strength Frequency Range Modulation Mode Channel Number (MHz) (dBuV/m) 13.553 – 13.567 MHz ISO 14443-3B (ASK) 13.56 1 62.20 Note 1: Field strength performed peak level at 3m. 1.1.2 Antenna Information Antenna Category Equipment placed on the market without antennas Integral antenna (antenna permanently attached) Temporary RF connector provided No temporary RF connector provided Transmit chains bypass antenna and soldered temporary RF connector provided for connected measurement. In case of conducted measurements the transmitter shall be connected to the measuring equipment via a suitable attenuator and correct for all losses in the RF path. External antenna (dedicated antennas) Antenna General Information No. Ant. Cat. Ant. Type 1 Integral Loop TEL : 886-3-327-3456 Page Number : 5 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 1.1.3 EUT Information Operational Condition EUT Power Type From Host System Type of EUT Stand-alone Combined (EUT where the radio part is fully integrated within another device) Combined Equipment - Brand Name / Model No.: Plug-in radio (EUT intended for a variety of host systems) Host System - Brand Name / Model No.: Tablet - Getac / A140, A140G2 Other: 1.1.4 Test Signal Duty Cycle Duty Cycle Operation Restriction The transmitter is used for The transmitter is operated Inductive applications Automatically triggered Duty cycle fixed mode Duty cycle random mode Duty cycle mode - NFC-A (ISO 14443-3A) Declare transmitter duty cycle / 1 hour = 100% Duty cycle mode - NFC-B (ISO 14443-3B) Declare transmitter duty cycle / 1 hour = 100% Duty cycle mode - NFC-F ( ISO 18092) Declare transmitter duty cycle / 1 hour = 100% Duty cycle mode - NFC-V (ISO 15693) Declare transmitter duty cycle / 1 hour = 100% TEL : 886-3-327-3456 Page Number : 6 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR FCC Part 15  ANSI C63.10-2013  KDB 174176 D01 v01r01 1.3 Testing Location Information Testing Location HWA YA ADD : No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 FAX : 886-3-327-0973 Test site Designation No. TW1190 with FCC. Test Condition Test Site No. Test Engineer Test Environment Test Date AC Conduction CO01-HY Edward 25.3~26.0°C / 58.2~62.7% 04/Jul/2019 RF Conducted TH06-HY Gary 23.2~24.8°C / 62~65% 03/Jul/2019 Radiated Emission 03CH02-HY Patrick 23.5~25.9°C / 53.2~55.7% 04/Jul/2019 1.4 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Test Items Uncertainty Remark Conducted Emission (150kHz ~ 30MHz) 3.54 dB Confidence levels of 95% Radiated Emission (9kHz ~ 30MHz) 1.6 dB Confidence levels of 95% Radiated Emission (30MHz ~ 1,000MHz) 4.3 dB Confidence levels of 95% Conducted Emission 1.3 dB Confidence levels of 95% Temperature 0.7 °C Confidence levels of 95% Humidity 4% Confidence levels of 95% TEL : 886-3-327-3456 Page Number : 7 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 2 Test Configuration of EUT 2.1 Test Condition Condition Item Abbreviation/Remark Remark Frequency Stability Tnom 20°C - Tmin -20°C - Tmax 50°C - Vnom 120V - Vmin 102V - Vmax 138V 2.2 The Worst Case Modulation Configuration Modulation Used for Conformance Testing Modulation Mode Field Strength (dBuV/m at 3 m) NFC 62.20 2.3 Test Channel Frequencies Configuration Modulation Mode Test Channel Frequencies (MHz) NFC 13.56 TEL : 886-3-327-3456 Page Number : 8 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 2.4 The Worst Case Measurement Configuration The Worst Case Mode for Following Conformance Tests Tests Item AC power-line conducted emissions Condition AC power-line conducted measurement for line and neutral Operating Mode 1. Adapter Mode The Worst Case Mode for Following Conformance Tests Tests Item Emission Bandwidth, Frequency Stability Test Condition Conducted measurement The Worst Case Mode for Following Conformance Tests Field Strength of Fundamental Emissions Tests Item Spectrum Mask, Transmitter Radiated Unwanted Emissions Test Condition Radiated measurement 1. NFC-A (ISO 14443-3A) 2. NFC-B (ISO 14443-3B) Pretest Mode 3. NFC-F ( ISO 18092) 4. NFC-V (ISO 15693) Mode 2 configuration was pretested and found to be the worst case and measured during the test. Operating Mode 1. Adapter Mode X Plane Y Plane Z Plane Orthogonal Planes of EUT Worst Planes of EUT V TEL : 886-3-327-3456 Page Number : 9 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 2.5 Support Equipment Support Equipment - AC Conduction No. Equipment Brand Name Model Name 1 Mouse DELL MS111-L 2 Earphone APPLE MD827FE/A 3 Host Getac A140 4 NFC Card - - 5 AC Adapter FSP FSP065-RBBN3 Support Equipment - RF Conducted No. Equipment Brand Name Model Name 1 DC Power Supply GW GPR-3510HD 2 Host Getac A140 Support Equipment - Radiated No. Equipment Brand Name Model Name 1 Mouse DELL MS111-L 2 Earphone APPLE MD827FE/A 3 Host Getac A140 4 NFC Card - - 5 AC Adapter FSP FSP065-RBBN3 TEL : 886-3-327-3456 Page Number : 10 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 2.6 Test Setup Diagram Test Setup Diagram – AC Line Conducted Emission Test Item Connection Shielded Length(m) Remark 1 AC Power line No 1.5 - 2 DC Power line No 1.45 - Test Setup Diagram - Radiated Test Item Connection Shielded Length(m) Remark 1 AC Power line No 1.5 - 2 DC Power line No 1.45 - TEL : 886-3-327-3456 Page Number : 11 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3 Transmitter Test Result 3.1 AC Power-line Conducted Emissions 3.1.1 AC Power-line Conducted Emissions Limit AC Power-line Conducted Emissions Limit Frequency Emission (MHz) Quasi-Peak Average 0.15-0.5 66 - 56 * 56 - 46 * 0.5-5 56 46 5-30 60 50 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.1.3 Test Procedures Test Method Refer as ANSI C63.10-2013, clause 6.2 for AC power-line conducted emissions. If AC conducted emissions fall in operating band, then following below test method confirm final result. Accept measurements done with a suitable dummy load replacing the antenna under the following conditions: (1) Perform the AC line conducted tests with the antenna connected to determine compliance with FCC 15.207 limits outside the transmitter's fundamental emission band; (2) Retest with a dummy load to determine compliance with FCC 15.207 limits within the transmitter's fundamental emission band. For a device with a permanent antenna operating at or below 30 MHz, accept measurements done with a suitable dummy load, in lieu of the permanent antenna under the following conditions: (1) Perform the AC line conducted tests with the permanent antenna to determine compliance with the FCC 15.207 limits outside the transmitter's fundamental emission band; (2) Retest with a dummy load in lieu of the permanent antenna to determine compliance with the FCC 15.207 limits within the transmitter's fundamental emission band. TEL : 886-3-327-3456 Page Number : 12 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.1.4 Test Setup AC Power-line Conducted Emissions TEL : 886-3-327-3456 Page Number : 13 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.1.5 Test Result of AC Power-line Conducted Emissions AC Power-line Conducted Emissions Result Operating Mode 1 Power Phase Neutral Operating Function Adapter Mode TEL : 886-3-327-3456 Page Number : 14 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR AC Power-line Conducted Emissions Result Operating Mode 1 Power Phase Line Operating Function Adapter Mode TEL : 886-3-327-3456 Page Number : 15 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.2 Emission Bandwidth 3.2.1 Emission Bandwidth Limit 20dB Bandwidth Limit Intentional radiators must be designed to ensure that the 20 dB bandwidth of the emissions in the specific band (13.553 – 13.567 MHz). 3.2.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.2.3 Test Procedures Test Method For the emission bandwidth refer ANSI C63.10, clause 6.9.1 for occupied bandwidth testing. For radiated measurement. Loop antenna was rotated about the horizontal and vertical axis and the equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted field strength level. 3.2.4 Test Setup Emission Bandwidth TEL : 886-3-327-3456 Page Number : 16 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.2.5 Test Result of Emission Bandwidth Occupied Channel Bandwidth Result Modulation Frequency 20dB 99% Bandwidth FL at 20dB BW FH at 20dB BW Mode (MHz) Bandwidth (kHz) (MHz) (MHz) (kHz) NFC 13.56 2.46000 2.09841 13.55933 13.56180 Limit N/A N/A 13.553 13.567 Result Complied Emission Bandwidth Plot - 20dB Bandwidth Emission Bandwidth Plot - 99% Bandwidth TEL : 886-3-327-3456 Page Number : 17 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.3 Field Strength of Fundamental Emissions and Spectrum Mask 3.3.1 Field Strength of Fundamental Emissions and Spectrum Mask Limit Field Strength of Fundamental Emissions For FCC Emissions (uV/m)@30m (dBuV/m)@30m (dBuV/m)@10m (dBuV/m)@3m (dBuV/m)@1m fundamental 15848 84.0 103.1 124.0 143.1 Quasi peak measurement of the fundamental. Spectrum Mask For FCC Freq. of (uV/m)@30m (dBuV/m)@30m (dBuV/m)@10m (dBuV/m)@3m (dBuV/m)@1m Emission (MHz) 1.705~13.110 30 29.5 48.6 69.5 88.6 13.110~13.410 106 40.5 59.6 80.5 99.6 13.410~13.553 334 50.5 69.6 90.5 109.6 13.553~13.567 15848 84.0 103.1 124.0 143.1 13.567~13.710 334 50.5 69.6 90.5 109.6 13.710~14.010 106 40.5 59.6 80.5 99.6 14.010~30.000 30 29.5 48.6 69.5 88.6 3.3.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.3.3 Test Procedures Test Method Refer as ANSI C63.10, clause 6.4 for radiated emissions from below 30 MHz and test distance is 3m. At frequencies below 30 MHz, measurements may be performed at a distance closer than that specified in the requirements; however, an attempt should be made to avoid making measurements in the near field. Pending the development of an appropriate measurement procedure for measurements performed below 30 MHz, when performing measurements at a closer distance than specified, the results shall be following below methods. The results shall be extrapolated to the specified distance by making measurements at a minimum of two distances on at least one radial to determine the proper extrapolation factor. The results shall be by using the square of an inverse linear distance extrapolation factor (40 dB/decade). For radiated measurement. Loop antenna was rotated about the horizontal and vertical axis and the equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted field strength level. TEL : 886-3-327-3456 Page Number : 18 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.3.4 Test Setup Field Strength of Fundamental Emissions and Spectrum Mask 3.3.5 Test Result of Field Strength of Fundamental Emissions and Spectrum Mask Field Strength of Fundamental Emissions Result Modulation Frequency Fundamental Limit Polarization Margin (dB) Mode (MHz) (dBuV/m)@3m (dBuV/m)@3m NFC 13.56 62.20 H -61.80 124.00 Result Complied Note 1: Measurement worst emissions of receive antenna polarization: H(Horizontal). Spectrum Mask Plot TEL : 886-3-327-3456 Page Number : 19 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.4 Transmitter Radiated Unwanted Emissions 3.4.1 Transmitter Radiated Unwanted Emissions Limit Transmitter Radiated Unwanted Emissions Limit Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 - 13.8 300 0.490~1.705 24000/F(kHz) 33.8 - 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below 30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB/decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. 3.4.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. TEL : 886-3-327-3456 Page Number : 20 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.4.3 Test Procedures Test Method Refer as ANSI C63.10, clause 6.5 for radiated emissions from 30 MHz to 1 GHz and test distance is 3m. Refer as ANSI C63.10, clause 6.4 for radiated emissions from below 30 MHz and test distance is 3m. At frequencies below 30 MHz, measurements may be performed at a distance closer than that specified in the requirements; however, an attempt should be made to avoid making measurements in the near field. Pending the development of an appropriate measurement procedure for measurements performed below 30 MHz, when performing measurements at a closer distance than specified, the results shall be following below methods. The results shall be extrapolated to the specified distance by making measurements at a minimum of two distances on at least one radial to determine the proper extrapolation factor. The results shall be by using the square of an inverse linear distance extrapolation factor (40 dB/decade). For radiated measurement. Loop antenna was rotated about the horizontal and vertical axis and the equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted field strength level. The any unwanted emissions level shall not exceed the fundamental emission level. All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. TEL : 886-3-327-3456 Page Number : 21 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.4.4 Test Setup Transmitter Radiated Unwanted Emissions Magnetic field tests shall be performed in the frequency range of 9 kHz to 30 MHz using a calibrated loop antenna. The center of the loop shall be 1 m above the ground. Transmitter Radiated Bandedge Emissions Electric field tests shall be performed in the frequency range of 30 MHz to 1000 MHz using a calibrated bi-log antenna. the antenna height shall be varied from 1 m to 4 m. TEL : 886-3-327-3456 Page Number : 22 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.4.5 Transmitter Radiated Unwanted Emissions (Below 30MHz) Summary Mode Result Type Freq Level Limit Margin Factor Dist Azimuth Height Comments (Hz) (dBuV/m) (dBuV/m) (dB) (dB) (m) (°) (m) 13.553-13.567MHz - - - - - - - - - - - NFC Pass PK 2.001M 53.14 69.50 -16.36 17.19 3 360 1.00 - TEL : 886-3-327-3456 Page Number : 23 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR Result Mode Result Type Freq Level Limit Margin Factor Dist Azimuth Height Comments (Hz) (dBuV/m) (dBuV/m) (dB) (dB) (m) (°) (m) NFC - - - - - - - - - - - 13.56MHz_Mode 1 Pass PK 9.846k 51.28 127.72 -76.44 10.89 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 20.562k 43.96 121.32 -77.36 12.28 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 37.482k 44.35 116.11 -71.76 13.36 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 209.7k 44.73 101.16 -56.43 14.62 3 360 1.00 - 13.56MHz_Mode 1 Pass PK 388.8k 52.09 95.80 -43.71 15.55 3 360 1.00 - 13.56MHz_Mode 1 Pass PK 2.001M 53.14 69.50 -16.36 17.19 3 360 1.00 - TEL : 886-3-327-3456 Page Number : 24 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR TEL : 886-3-327-3456 Page Number : 25 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR TEL : 886-3-327-3456 Page Number : 26 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.4.6 Transmitter Radiated Unwanted Emissions (Above 30MHz) Summary Mode Result Type Freq Level Limit Margin Factor Dist Azimuth Height Comments (Hz) (dBuV/m) (dBuV/m) (dB) (dB) (m) (°) (m) 13.553-13.567MHz - - - - - - - - - - - NFC Pass PK 39.7M 29.64 40.00 -10.36 -9.61 3 0 1.00 - TEL : 886-3-327-3456 Page Number : 27 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR Result Mode Result Type Freq Level Limit Margin Factor Dist Azimuth Height Comments (Hz) (dBuV/m) (dBuV/m) (dB) (dB) (m) (°) (m) NFC - - - - - - - - - - - 13.56MHz_Mode 1 Pass PK 39.7M 29.64 40.00 -10.36 -9.61 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 66.86M 25.68 40.00 -14.32 -15.49 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 309.36M 25.94 46.00 -20.06 -5.69 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 491.72M 25.94 46.00 -20.06 -2.37 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 623.64M 29.05 46.00 -16.95 -0.45 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 672.14M 31.60 46.00 -14.40 -0.28 3 0 1.00 - 13.56MHz_Mode 1 Pass PK 39.7M 29.11 40.00 -10.89 -9.61 3 360 1.00 - 13.56MHz_Mode 1 Pass PK 66.86M 23.55 40.00 -16.45 -15.49 3 360 1.00 - 13.56MHz_Mode 1 Pass PK 227.88M 25.73 46.00 -20.27 -9.63 3 360 1.00 - 13.56MHz_Mode 1 Pass PK 577.08M 28.49 46.00 -17.51 -1.37 3 360 1.00 - 13.56MHz_Mode 1 Pass PK 672.14M 32.10 46.00 -13.90 -0.28 3 360 1.00 - 13.56MHz_Mode 1 Pass PK 747.8M 32.73 46.00 -13.27 0.87 3 360 1.00 - TEL : 886-3-327-3456 Page Number : 28 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR TEL : 886-3-327-3456 Page Number : 29 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR TEL : 886-3-327-3456 Page Number : 30 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.5 Frequency Stability 3.5.1 Frequency Stability Limit Frequency Stability Limit Carrier frequency stability shall be maintained to ±0.01% (±100 ppm). 3.5.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.5.3 Test Procedures Test Method Refer as ANSI C63.10, clause 6.8 for frequency stability tests Frequency stability with respect to ambient temperature Frequency stability when varying supply voltage For conducted measurement. For radiated measurement. The equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted power level. 3.5.4 Test Setup Frequency Stability TEL : 886-3-327-3456 Page Number : 31 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 3.5.5 Test Result of Frequency Stability Frequency Stability Result Condition Ch. Freq. Frequency Stability (ppm) (MHz) Test Frequency (MHz) Frequency Stability (ppm) 0 min 2 min 5 min 10 min 0 min 2 min 5 min 10 min T20°CVmax 13.56 13.56058 13.56055 13.56055 13.56052 42.48 40.27 40.71 38.50 T20°CVmin 13.56 13.56053 13.56114 13.56053 13.56054 39.09 84.14 38.86 39.97 T50°CVnom 13.56 13.56052 13.56049 13.56051 13.56051 38.50 35.99 37.39 37.61 T40°CVnom 13.56 13.56053 13.56054 13.56051 13.56053 39.23 39.82 37.24 38.79 T30°CVnom 13.56 13.56054 13.56053 13.56053 13.56055 40.04 39.16 38.79 40.56 T20°CVnom 13.56 13.56050 13.56050 13.56050 13.56051 36.73 36.95 36.50 37.61 T10°CVnom 13.56 13.56056 13.56053 13.56055 13.56057 40.93 38.94 40.34 42.33 T0°CVnom 13.56 13.56056 13.56054 13.56054 13.56054 41.00 39.60 40.12 40.04 T-10°CVnom 13.56 13.56054 13.56052 13.56053 13.56055 40.04 38.35 39.01 40.63 T-20°CVnom 13.56 13.55936 13.56055 13.56052 13.56052 -47.12 40.41 38.42 38.50 Limit (ppm) - 100 Result Complied Note 1: Measure at 85 % [Vmin] and 115 % [Vmax] of the nominal voltage [Vnom]. The nominal voltage refer test report clause 2.1 for EUT operational condition. Note 2: Measure maximum deviation frequency at operating frequency at startup and two, five, and ten min. TEL : 886-3-327-3456 Page Number : 32 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A

FCC Test Report Report No. : FR6D2154-31AR 4 Test Equipment and Calibration Data Instrument for AC Conduction Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date EMC Receiver R&S ESR3 102052 9kHz ~ 3.6GHz 09/Apr/2019 08/Apr/2020 LISN R&S ENV 216 101274 9kHz ~ 30MHz 03/Jun/2019 02/Jun/2020 RF Cable-CON MTJ RG142 CB001-CO 9kHz ~ 30MHz 17/Sep/2018 16/Sep/2019 47Hz~63Hz AC POWER APC AFC-11003G F308010045 NCR NCR 5~300V Impuls Begrenzer SCHWARZBECK VTSD 9561F 9495 9kHz ~ 30MHz 11/Oct/2018 10/Oct/2019 Pulse Limiter NCR : Non-Calibration Require Instrument for Conducted Test Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date Spectrum Analyzer R&S FSV 40 101013 9kHz~40GHz 13/Mar/2019 12/Mar/2020 Loop Antenna TESEQ HLA 6120 31244 9kHz ~ 30MHz 15/Mar/2019 14/Mar/2020 TEMP & hmuidity -40~100℃ Giant Force GTH-225-40-CP-AR MAA1611-005 04/Dec/2018 03/Dec/2019 Chamber 10~98%RH Instrument for Radiated Test Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date 3m Semi Anechoic 30MHz ~ 1GHz SIDT FRANKONIA SAC-3M 03CH02-HY 19/Oct/2018 18/Oct/2019 Chamber 3m Amplifier COM -POWER PA-103 161046 1-1000MHz 13/Dec/2018 12/Dec/2019 Signal Analyzer R&S FSV40 101500 10Hz ~ 40GHz 18/Jul/2018 17/Jul/2019 RF Cable-R03m Jye Bao RG142 CB017 9kHz ~ 1GHz 18/Jan/2019 17/Jan/2020 Bilog Antenna & 5dB CBL 6112B / SCHAFFNER / MTJ 2723 / 2 30MHz ~ 1GHz 08/Sep/2018 07/Sep/2019 Attenuator MTJ6102-05 EMI Test Receiver R&S ESR 102052 9kHz ~ 3.6GHz 09/Apr/2019 08/Apr/2020 Loop Antenna TESEQ HLA 6120 31244 9k-30MHz 15/Mar/2019 14/Mar/2020 TEL : 886-3-327-3456 Page Number : 33 of 33 FAX : 886-3-327-0973 Issued Date : Aug. 16, 2019 Report Template No.: HE1-C6 Ver2.3 Report Version : 01 FCC ID: QYLPN7462A


Document Created: 2019-08-16 16:15:13
Document Modified: 2019-08-16 16:15:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC