Limited Modular Approval Request Letter

FCC ID: QYLK120R

Cover Letter(s)

Download: PDF
FCCID_4054740

Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City 11568 Taiwan Date: October 18, 2018 Request for Limited Modular Approval for FCC ID: QYLK120R Item Requirements EUT 1 The modular transmitter must have its own The module has been installed in the host device RF shielding. (equipment: Tablet, brand: Getac , model: K120), and does not have its own shielding case for Limited Modular Approval, please see exhibition external photos. 2 The modular transmitter must have buffered The EUT has buffer modulation / data inputs. modulation / data inputs. 3 The modular transmitter must have its own The EUT has its own power supply regulation. power supply regulation. 4 The modular transmitter must comply with The EUT meets the FCC antenna requirements. The the antenna requirements of the Section spurious emission, unique antenna connector and 15.203 and 15.204(c). photo of antennas are shown in the External and Internal photos. 5 The modular transmitter must be tested in a The module was tested in the host device stand-alone configuration. (equipment: Tablet, brand: Getac , model: K120) because this is limited modular approval with the mentioned equipment. 6 The modular transmitter must be labeled The module FCC ID will be put on the host device with its own FCC ID number. label because this is limited modular approval with this equipment. 7 The modular transmitter must comply with This module will be integrated with the host any specific rule or operating requirements device which is complying with FCC Part 15.225. applicable to the transmitter and the (equipment: Tablet, brand: Getac , model: K120) before shipping to the users. The end users have manufacturer must provide adequate no chance to install this module. instructions along with the module to explain any such requirements. 8 The modular transmitter must comply with The modular transmitter complies with RF exposure any applicable RF exposure requirement. on the host device. Kevin Chiang Getac Technology Corporation Tel: +886-2-27857888 Fax: +886-2-26525865 E-mail: kevin.chiang@getac.com.tw


Document Created: 2018-10-24 23:41:11
Document Modified: 2018-10-24 23:41:11
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC