Test Report DCD

FCC ID: QYLEMR116RC

Test Report

Download: PDF
FCCID_3753130

FCC Test Report Report No. : FR391803-37AS FCC Test Report Equipment : Digitizer module Brand Name : Getac Model No. : EMR116-UA00 FCC ID : QYLEMR116RC Standard : 47 CFR FCC Part 15.209 Operating Band : 9 – 90 kHz FCC Classification : DCD Applicant : Getac Technology Corporation. 5F., Building A, No. 209, Sec.1, Nangang Rd.,Nangang Dist., Taipei City 11568, Taiwan, R.O.C. The product sample received on Jun. 14, 2017 and completely tested on Jun. 28, 2017. We, SPORTON, would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.10-2013 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Phoenix Chen / Assistant Manager SPORTON INTERNATIONAL INC. Page No. : 1 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 5 1.1 Information.............................................................................................................................................. 5 1.2 Testing Applied Standards ..................................................................................................................... 6 1.3 Testing Location Information .................................................................................................................. 6 1.4 Measurement Uncertainty ...................................................................................................................... 7 2 TEST CONFIGURATION OF EUT......................................................................................................... 8 2.1 The Worst Case Modulation Configuration ............................................................................................ 8 2.2 Test Channel Frequencies Configuration ............................................................................................... 8 2.3 The Worst Case Measurement Configuration ........................................................................................ 8 2.4 Accessory and Support Equipment ........................................................................................................ 9 2.5 Test Setup Diagram .............................................................................................................................10 3 TRANSMITTER TEST RESULT ..........................................................................................................11 3.1 AC Power-line Conducted Emissions ..................................................................................................11 3.2 Transmitter Radiated Emissions ..........................................................................................................15 3.3 Emission Bandwidth .............................................................................................................................23 4 TEST EQUIPMENT AND CALIBRATION DATA ................................................................................25 Appendix A. Test Photos Photographs of EUT v01 SPORTON INTERNATIONAL INC. Page No. : 2 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS Summary of Test Result Conformance Test Specifications Report Ref. Std. Description Measured Limit Result Clause Clause 1.1.2 15.203 Antenna Requirement Antenna connector FCC 15.203 Complied mechanism complied 3.1 15.207 AC Power-line [dBuV]: 13.56MHz FCC 15.207 Complied Conducted Emissions 43.75(Margin 16.25dB) - QP 38.27 (Margin 11.73dB) - AV 3.2 15.209 Transmitter Radiated [dBuV/m at 3m]: 532.460MHz FCC 15.209 Complied Unwanted Emissions 39.74 (Margin 6.26dB) - PK 3.3 15.215(c) Emission Bandwidth 99% Bandwidth: 2.22 [kHz] N/A Complied 20dB Bandwidth:1.48 [kHz] SPORTON INTERNATIONAL INC. Page No. : 3 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS Revision History Report No. Version Description Issued Date FR391803-37AS Rev. 01 Initial issue of report Feb. 06, 2018 SPORTON INTERNATIONAL INC. Page No. : 4 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 1 General Description 1.1 Information 1.1.1 RF General Information RF General Information Frequency 9 – 90 kHz Field Strength Modulation Ch. Frequency (kHz) Channel Number (dBuV/m@3m) ASK 80.53kHz 1 56.44 1.1.2 Antenna Information Antenna Category Integral antenna (antenna permanently attached) Temporary RF connector provided No temporary RF connector provided Transmit chains bypass antenna and soldered temporary RF connector provided for connected measurement. In case of conducted measurements the transmitter shall be connected to the measuring equipment via a suitable attenuator and correct for all losses in the RF path. External antenna (dedicated antennas) Single power level with corresponding antenna(s). Multiple power level and corresponding antenna(s). No. Ant. Cat. Ant. Type 1 Integral Array Coil Pointing SPORTON INTERNATIONAL INC. Page No. : 5 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 1.1.3 Type of EUT Identify EUT Presentation of Equipment Production ; Pre-Production ; Prototype Type of EUT Stand-alone Combined (EUT where the radio part is fully integrated within another device) Combined Equipment - Brand Name / Model No.: … Plug-in radio (EUT intended for a variety of host systems) Host System - Equipment Name/Brand Name / Model No.: Tablet/Getac/RC11 Other: 1.1.4 Test Signal Duty Cycle Operated Mode for Worst Duty Cycle Operated normal mode for worst duty cycle Operated test mode for worst duty cycle Test Signal Duty Cycle (x) 100.00% 1.1.5 EUT Operational Condition Supply Voltage AC mains DC Type of DC Source External AC adapter From Host System From Battery 1.2 Testing Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  47 CFR FCC Part 15  ANSI C63.10-2013 1.3 Testing Location Information Testing Location HWA YA ADD : No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 FAX : 886-3-327-0973 Test Condition Test Site No. Test Engineer Test Environment Test Date AC Conduction CO04-HY Bear 21.3°C / 60% 28/Jun/2017 RF Conducted TH01-HY Wayne 21.5°C / 63.5% 22/Jun/2017 Radiated Emission 03CH03-HY Thor 23.4°C / 53% 22/Jun/2017 Test site registered number [TW1190] with FCC. SPORTON INTERNATIONAL INC. Page No. : 6 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 1.4 Measurement Uncertainty ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2) Measurement Uncertainty Test Item Uncertainty AC power-line conducted emissions ±2.3 dB Emission bandwidth, 6dB bandwidth ±0.6 % RF output power, conducted ±0.1 dB Power density, conducted ±0.6 dB Unwanted emissions, conducted 9 – 150 kHz ±0.4 dB 0.15 – 30 MHz ±0.4 dB 30 – 1000 MHz ±0.6 dB 1 – 18 GHz ±0.5 dB 18 – 40 GHz ±0.5 dB 40 – 200 GHz N/A All emissions, radiated 9 – 150 kHz ±2.5 dB 0.15 – 30 MHz ±2.3 dB 30 – 1000 MHz ±2.6 dB 1 – 18 GHz ±3.6 dB 18 – 40 GHz ±3.8 dB 40 – 200 GHz N/A Temperature ±0.8 °C Humidity ±5 % DC and low frequency voltages ±0.9 % Time ±1.4 % Duty Cycle ±0.6 % SPORTON INTERNATIONAL INC. Page No. : 7 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 2 Test Configuration of EUT 2.1 The Worst Case Modulation Configuration Transmitter Mode Field Strength (dBuV/m@3m) Touch Panel 56.44 2.2 Test Channel Frequencies Configuration Modulation Test Channel Frequencies (kHz) ASK 80.53 2.3 The Worst Case Measurement Configuration The Worst Case Mode for Following Conformance Tests Tests Item AC power-line conducted emissions Condition AC power-line conducted measurement for line and neutral Test Voltage: 120Vac / 60Hz Operating Mode Operating Mode Description 1 Adapter Mode The Worst Case Mode for Following Conformance Tests Tests Item Emission Bandwidth, Field Strength of Fundamental Emissions Transmitter Radiated Unwanted Emissions Test Condition Radiated measurement EUT will be placed in fixed position. EUT will be placed in mobile position and operating multiple positions. User Position EUT shall be performed three orthogonal planes. EUT will be a hand-held or body-worn battery-powered devices and operating multiple positions. Operating Mode Operating Mode Description 1 Adapter Mode Transmitter Mode Touch Panel X Plane Y Plane Z Plane Orthogonal Planes of EUT Worst Planes of EUT V SPORTON INTERNATIONAL INC. Page No. : 8 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 2.4 Accessory and Support Equipment Accessories Information Brand Name Chicony Model Name A12-065N2A AC Adapter Power Rating I/P: 100 - 240 Vac, 1.7 A, O/P: 19 Vdc, 3.42 A, 65W Power Cord 1.7 meter, non-shielded cable, with ferrite core Brand Name Getac Model Name NA Power Cable Signal Line 1.7 meter, non-shielded cable, w/o ferrite core Brand Name Getac Model Name BP3S1P2160-S Battery Power Rating 11.4 Vdc,2160mAh Type Li-ion Note: Regarding to more detail and other information, please refer to user manual. Support Equipment - AC Conduction No. Equipment Brand Name Model Name - - - - Support Equipment - Radiated No. Equipment Brand Name Model Name - - - - Support Equipment- RF Conducted No Equipment Brand Name Model Name . - - - - SPORTON INTERNATIONAL INC. Page No. : 9 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 2.5 Test Setup Diagram Test Setup Diagram – AC Line Conducted Emission Test Item Connection Shielded Length(m) Remark 1 AC Power line No 1.8m - 2 DC Power line No 1.7m - Test Setup Diagram - Radiated Test Item Connection Shielded Length(m) Remark 1 AC Power line No 1.8m - 2 DC Power line No 1.7m - SPORTON INTERNATIONAL INC. Page No. : 10 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3 Transmitter Test Result 3.1 AC Power-line Conducted Emissions 3.1.1 AC Power-line Conducted Emissions Limit AC Power-line Conducted Emissions Limit Frequency Emission (MHz) Quasi-Peak Average 0.15-0.5 66 - 56 * 56 - 46 * 0.5-5 56 46 5-30 60 50 Note 1: * Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.1.3 Test Procedures Test Method Refer as ANSI C63.10-2013, clause 6.2 for AC power-line conducted emissions. If AC conducted emissions fall in operating band, then following below test method confirm final result. Accept measurements done with a suitable dummy load replacing the antenna under the following conditions: (1) Perform the AC line conducted tests with the antenna connected to determine compliance with FCC 15.207 limits outside the transmitter's fundamental emission band; (2) Retest with a dummy load to determine compliance with FCC 15.207 limits within the transmitter's fundamental emission band. For a device with a permanent antenna operating at or below 30 MHz, accept measurements done with a suitable dummy load, in lieu of the permanent antenna under the following conditions: (1) Perform the AC line conducted tests with the permanent antenna to determine compliance with the FCC 15.207 limits outside the transmitter's fundamental emission band; (2) Retest with a dummy load in lieu of the permanent antenna to determine compliance with the FCC 15.207 limits within the transmitter's fundamental emission band. SPORTON INTERNATIONAL INC. Page No. : 11 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.1.4 Test Setup AC Power-line Conducted Emissions SPORTON INTERNATIONAL INC. Page No. : 12 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.1.5 Test Result of AC Power-line Conducted Emissions AC Power-line Conducted Emissions Result Operating Mode 1 Power Phase Neutral Ch. Frequency (kHz) 80.53 Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) Note 3: When emissions are in operating band over limits, retest with a dummy load for final in-band results. SPORTON INTERNATIONAL INC. Page No. : 13 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS AC Power-line Conducted Emissions Result Operating Mode 1 Power Phase Line Ch. Frequency (kHz) 80.53 Note 1: “>20dB” means emission levels that exceed the level of 20 dB below the applicable limit. Note 2: “N/F” means Nothing Found emissions (No emissions were detected.) Note 3: When emissions are in operating band over limits, retest with a dummy load for final in-band results. SPORTON INTERNATIONAL INC. Page No. : 14 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.2 Transmitter Radiated Emissions 3.2.1 Transmitter Radiated Emissions Limit Transmitter Radiated Emissions Limit Frequency Range (MHz) Field Strength (uV/m) Field Strength (dBuV/m) Measure Distance (m) 0.009~0.490 2400/F(kHz) 48.5 - 13.8 300 0.490~1.705 24000/F(kHz) 33.8 - 23 30 1.705~30.0 30 29 30 30~88 100 40 3 88~216 150 43.5 3 216~960 200 46 3 Above 960 500 54 3 Note 1: Test distance for frequencies at or above 30 MHz, measurements may be performed at a distance other than the limit distance provided they are not performed in the near field and the emissions to be measured can be detected by the measurement equipment. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse of linear distance for field-strength measurements, inverse of linear distance-squared for power-density measurements). Note 2: Test distance for frequencies at below 30 MHz, measurements may be performed at a distance closer than the EUT limit distance; however, an attempt should be made to avoid making measurements in the near field. When performing measurements below 30 MHz at a closer distance than the limit distance, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two or more distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB/decade). The test report shall specify the extrapolation method used to determine compliance of the EUT. Note 3: the frequency bands 9-90 kHz, 110-490 kHz measurements employing an average detector and other below 1GHz measurements employing a CISPR quasi-peak detector. 3.2.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. SPORTON INTERNATIONAL INC. Page No. : 15 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.2.3 Test Procedures Test Method Refer as ANSI C63.10, clause 6.5 for radiated emissions from 30 MHz to 1 GHz and test distance is 3m. Note : The test distance of radiated emissions from 662kHz to 672kHz is 1m. Refer as ANSI C63.10, clause 6.4 for radiated emissions from below 30 MHz. The frequency bands 9-90 kHz, 110-490 kHz measurements employing an average detector and other below 30MHz measurements employing a CISPR quasi-peak detector. Test distance is 3m. At frequencies below 30 MHz, measurements may be performed at a distance closer than that specified in the requirements; however, an attempt should be made to avoid making measurements in the near field. Pending the development of an appropriate measurement procedure for measurements performed below 30 MHz, when performing measurements at a closer distance than specified, the results shall be following below methods. Note: If fundamental emission level is smaller than noise at 3m , we will change distance to 1m. The results shall be extrapolated to the specified distance by making measurements at a minimum of two distances on at least one radial to determine the proper extrapolation factor. The results shall be by using the square of an inverse linear distance extrapolation factor (40 dB/decade). For radiated measurement. Loop antenna was rotated about the horizontal and vertical axis and the equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted field strength level. The any unwanted emissions level shall not exceed the fundamental emission level. All amplitude of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 16 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.2.4 Test Setup Transmitter Radiated Emissions Magnetic field tests shall be performed in the frequency range of 9 kHz to 30 MHz using a calibrated loop antenna. The center of the loop shall be 1 m above the ground. Electric field tests shall be performed in the frequency range of 30 MHz to 1000 MHz using a calibrated bi-log antenna. the antenna height shall be varied from 1 m to 4 m. SPORTON INTERNATIONAL INC. Page No. : 17 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.2.5 Transmitter Radiated Emissions (Below 30MHz) Transmitter Radiated Emissions (80.53 kHz) Mode Touch Panel Test Freq.(kHz) 80.53 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement worst emissions of receive antenna polarization: H (Horizontal). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Test fundamental emission at 3m. Note 6: Below 30MHz of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 18 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS Transmitter Radiated Emissions (9kHz~150kHz) Mode Touch Panel Test Freq.(kHz) 80.53 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement worst emissions of receive antenna polarization: H (Horizontal). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. Note 6 : Below 30MHz of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 19 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS Transmitter Radiated Emissions (150kHz~30MHz) Mode Touch Panel Test Freq.(kHz) 80.53 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement worst emissions of receive antenna polarization: H (Horizontal). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. Note 6 : Below 30MHz of spurious emissions that are attenuated by more than 20 dB below the permissible value has no need to be reported. SPORTON INTERNATIONAL INC. Page No. : 20 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.2.6 Transmitter Radiated Emissions (Above 30MHz) Transmitter Radiated Emissions (Above 30MHz) Mode Touch Panel Test Freq.(kHz) 80.53 Operating Mode 1 Polarization V Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. SPORTON INTERNATIONAL INC. Page No. : 21 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS Transmitter Radiated Emissions (Above 30MHz) Mode Touch Panel Test Freq.(kHz) 80.53 Operating Mode 1 Polarization H Note 1: “>20dB” means spurious emission levels that exceed the level of 6 dB below the applicable limit. Note 2: “N/F” means Nothing Found spurious emissions (No spurious emissions were detected.) Note 3: Measurement receive antenna polarization: H (Horizontal), V (Vertical). Note 4: No level of unwanted emissions exceeds the level of the fundamental emission. Note 5: Except fundamental emission, other emissions from digital circuitry used to control additional panel functions or display capabilities other than the touch panel radio transmission. While disable touch panel radio transmission, other emissions have the same levels. Therefore other emissions level could be exceed the fundamental emission level. SPORTON INTERNATIONAL INC. Page No. : 22 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.3 Emission Bandwidth 3.3.1 Emission Bandwidth Limit Emission Bandwidth Limit N/A 3.3.2 Measuring Instruments Refer a test equipment and calibration data table in this test report. 3.3.3 Test Procedures Test Method For the emission bandwidth refer ANSI C63.10, clause 6.9.3 for occupied bandwidth testing. For radiated measurement. Loop antenna was rotated about the horizontal and vertical axis and the equipment to be measured and the test antenna shall be oriented to obtain the maximum emitted field strength level. 3.3.4 Test Setup Emission Bandwidth SPORTON INTERNATIONAL INC. Page No. : 23 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 3.3.5 Test Result of Emission Bandwidth Occupied Channel Bandwidth Result Transmitter Mode Frequency (kHz) 99% Bandwidth (kHz) 20dB Bandwidth (kHz) Touch Panel 80.53 2.22 1.48 Limit N/A Result Complied Emission Bandwidth Plot - 99% Bandwidth Emission Bandwidth Plot - 20dB Bandwidth SPORTON INTERNATIONAL INC. Page No. : 24 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973

FCC Test Report Report No. : FR391803-37AS 4 Test Equipment and Calibration Data Instrument for AC Conduction Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date EMC Receiver R&S ESR3 102052 9KHz ~ 3.6GHz 29/Apr/2017 28/Apr/2018 LISN R&S ENV216 101295 9kHz ~ 30MHz 15/Nov/2016 14/Nov/2017 RF Cable-CON HUBER+SUHNER RG213/U 07611832020001 9kHz ~ 30MHz 24/Oct/2016 23/Oct/2017 47Hz~63Hz AC POWER APC AFC-11005G F310050055 NCR NCR 5~300V Impuls Begrenzer Pulse R&S ESH3-Z2 100921 10 kHz ~ 30 MHz 20/Oct/2016 19/Oct/2017 Limiter NCR: No Calibration Require. Instrument for Conducted Test Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date Spectrum R&S FSV 40 101013 9kHz~40GHz 30/Dec/2016 29/Dec/2017 Analyzer Loop Antenna TESEQ HLA 6120 31244 9 kHz~30 MHz 02/Mar/2017 01/Mar/2018 Instrument for Radiated Test Calibration Calibration Instrument Manufacturer Model No. Serial No. Characteristics Date Due Date 3m Semi 30MHz ~ 1GHz Anechoic SIDT FRANKONIA SAC-3M 03CH03-HY 27/Nov/2016 26/Nov/2017 3m Chamber Amplifier HP 8447D 2944A08033 10kHz ~ 1.3GHz 19/Apr/2017 18/Apr/2018 Spectrum R&S FSV40 101515 9kHz ~ 40GHz 28/Nov/ 2016 27/Nov/2017 RF Cable-R03m Jye Bao RG142 CB021 9kHz ~ 1GHz 26/Jan/2017 25/Jan/2018 Bilog Antenna SCHAFFNER CBL 6112B 2723 30MHz ~ 1GHz 01/Oct/2016 30/Sep/2017 Loop Antenna TESEQ HLA 6120 31244 9 kHz~30 MHz 02/Mar/2017 01/Mar/2018 Receiver R&S ESU-26 100422/026 20Hz ~ 26.5GHz 21/Sep/2016 20/Sep/2017 SPORTON INTERNATIONAL INC. Page No. : 25 of 25 TEL : 886-3-327-3456 Report Version : Rev. 01 FAX : 886-3-327-0973


Document Created: 2018-02-09 15:35:58
Document Modified: 2018-02-09 15:35:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC