RF Exposure WLAN Appendix A

FCC ID: QYLEA01

RF Exposure Info

Download: PDF
FCCID_1321901

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab   Date: 2010/5/20

System Check_Body_2450MHz_100520

DUT: Dipole 2450 MHz

Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: MSL_2450_100520 Medium parameters used: f = 2450 MHz; σ = 2.02 mho/m; εr = 53.8; ρ = 1000
kg/m3
Ambient Temperature:22.6 ℃; Liquid Temperature:21.6 ℃

DASY5 Configuration:
- Probe: ET3DV6 - SN1788; ConvF(4.19, 4.19, 4.19); Calibrated: 2009/9/23
- Sensor-Surface: 4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn778; Calibrated: 2009/9/18
- Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1029
- Measurement SW: DASY5, V5.0 Build 125; SEMCAD X Version 13.4 Build 125


Pin=100mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 5.5 mW/g

Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 53.1 V/m; Power Drift = 0.010 dB
Peak SAR (extrapolated) = 10.9 W/kg
SAR(1 g) = 4.81 mW/g; SAR(10 g) = 2.23 mW/g
Maximum value of SAR (measured) = 5.36 mW/g


0 dB = 5.36mW/g


Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab   Date: 2010/5/24

System Check_Body_5500MHz_100524

DUT: Dipole 5GHz

Communication System: CW; Frequency: 5500 MHz;Duty Cycle: 1:1
Medium: MSL_5G_100524 Medium parameters used: f = 5500 MHz; σ = 5.49 mho/m; εr = 47; ρ =
1000 kg/m3
Ambient Temperature:22.5 ℃; Liquid Temperature:21.4 ℃

DASY4 Configuration:
- Probe: EX3DV3 - SN3514; ConvF(3.86, 3.86, 3.86); Calibrated: 2010/1/26
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Electronics: DAE3 Sn577; Calibrated: 2009/8/24
- Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026
- Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186


Pin=100mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 13.7 mW/g

Pin=100mW/Zoom Scan (8x8x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm,
dz=3mm
Reference Value = 55.3 V/m; Power Drift = -0.009 dB
Peak SAR (extrapolated) = 29.5 W/kg
SAR(1 g) = 7.88 mW/g; SAR(10 g) = 2.21 mW/g
Maximum value of SAR (measured) = 13.2 mW/g




               0 dB = 13.2mW/g



Document Created: 2010-08-03 11:27:15
Document Modified: 2010-08-03 11:27:15

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC