QYLAX200NG

FCC ID

Equipment: Wireless module

Getac Technology Corporation AX200NG

5F.,Building A,No.209,Sec.1 Nangang.,Rd.,, Taipei City, N/A 11568 Taiwan

Application
Frequency Range
Final Action Date
Granted
4dzsjO2NR+LXeKn8bj7Z3g==
5180.0-5240.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5190.0-5230.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5210.0-5210.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5250.0-5250.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5260.0-5320.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5270.0-5310.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5290.0-5290.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5500.0-5700.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5530.0-5690.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5710.0-5710.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5720.0-5720.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5745.0-5825.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5755.0-5795.0
2020-02-07
APPROVED
4dzsjO2NR+LXeKn8bj7Z3g==
5775.0-5775.0
2020-02-07
APPROVED
KZnOvXehaUtyHPJDIommAg==
2402.0-2480.0
2020-02-07
APPROVED
jf2IzGrxVgOqQPEMIc4E+g==
2422.0-2462.0
2020-02-07
APPROVED
jf2IzGrxVgOqQPEMIc4E+g==
2402.0-2480.0
2020-02-07
APPROVED
jf2IzGrxVgOqQPEMIc4E+g==
2412.0-2472.0
2020-02-07
APPROVED
File NameDocument TypeDateDirect
Label infoID Label/Location Info 2020-02-07 00:00:00 pdf
Change ID request letterCover Letter(s) 2020-02-07 00:00:00 pdf
Confidential request letterCover Letter(s) 2020-02-07 00:00:00 pdf
POACover Letter(s) 2020-02-07 00:00:00 pdf
Original grantee authorizationCover Letter(s) 2020-02-07 00:00:00 pdf
External photoExternal Photos 2020-08-06 00:00:00 N/A

Application Details:

EquipmentWireless module
FRN0018268243
Grantee CodeQYL
Product CodeAX200NG
Applicant BusinessGetac Technology Corporation
Business Address5F.,Building A,No.209,Sec.1 Nangang.,Rd., , Taipei City,N/A Taiwan 11568
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantKevin Chiang –
Applicant Phone 1142
Applicant Fax+886-2-26525865
Applicant Email[email protected].com.tw
Applicant MailStop
Test FirmIntel Corporation S.A.S.
Test Firm ContactNawfal ASRIH
Test Firm Phone
Test Firm Fax0033493001401
Test Firm Email[email protected]
Certified ByKevin Chiang –
Comment [4dzsjO2NR+LXeKn8bj7Z3g==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [jf2IzGrxVgOqQPEMIc4E+g==]: Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [KZnOvXehaUtyHPJDIommAg==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC