rf exposure report

FCC ID: QWY-V1140-104-1

RF Exposure Info

Download: PDF
FCCID_3011252

TEST REPORT No.: TR-15-1-0006302-03a According to FCC Regulations: Part 1.1310, Part 2.1091 for peiker acustic GmbH & Co. KG GSM/E-GPRS/W-CDMA/LTE Wireless Module V1140-104-1 FCC-ID: QWY-V1140-104-1 Laboratory Accreditation and Listings Voluntary Controls for Industry Canada Electromagnetic Emissions Reg. No.: 3462D-1 Reg. No.: Reg. No.: 3462D-2 R-2666 C-2914, MRA US-EU 0003 Reg. No.: 3462D-3 T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 27 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report TR-15-1-0006302-03a, Page 2 of 27 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 4 1.1. TX mode, tests overview FCC Part 2.1091 ..................................................................................................... 4 2. ADMINISTRATIVE DATA ............................................................................................................................... 5 2.1. Identification of the testing laboratory ............................................................................................................. 5 2.2. Test location .................................................................................................................................................... 5 2.2.1. Test laboratory “CTC” 5 2.3. Organizational items ........................................................................................................................................ 5 2.4. Applicant’s details ........................................................................................................................................... 5 2.5. Manufacturer’s details ..................................................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 6 3.1. TECHNICAL DATA GSM/W-CDMA OF MAIN EUT DECLARED BY APPLICANT ............................. 6 3.2. LTE TECHNICAL DATA OF MAIN EUT DECLARED BY APPLICANT ................................................ 8 3.3. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 9 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 9 3.5. EUT set-ups ..................................................................................................................................................... 10 3.6. EUT operating modes ...................................................................................................................................... 11 3.7. LTE EUT operating modes .............................................................................................................................. 12 3.8. Configuration of cables used for testing .......................................................................................................... 12 4. MEASUREMENTS ............................................................................................................................................. 13 4.1. Radio Frequency Exposure Evaluation §2.1091 .............................................................................................. 13 4.1.1. Test location and equipment (for reference numbers please see chapter 'List of test equipment') 13 4.1.2. Requirements 13 4.1.3. General Limits: 14 4.1.4. Evaluation Method 14 4.2. Results for fixed and mobile operations .......................................................................................................... 15 4.2.1. Results for operational band: GSM850, FDD band 5 and LTE FDD band 5 15 4.2.2. Results for operational band: GSM850, FDD band 5 and LTE FDD band 5 – Set-up 3 (Roof-Version , External antenna) 16 4.2.3. Results for operational band: GSM850, FDD band 5 and LTE FDD band 5 – Set-up 4 (Roof-Version , Internal antenna) 16 4.2.4. Results for operational band: GSM850, FDD5 and LTE band 5 – Set-up 5 (Trunk-Version) 17 4.2.5. Results for upper operational band: GSM1900 18 4.2.6. Results for operational band: GSM1900 – Set-up 2 (Roof-Version , External antenna) 19 4.2.7. Results for operational band: GSM1900 – Set-up 3 (Roof-Version , internal antenna) 19 4.2.8. Results for operational band: GSM1900 – Set-up 4 (Trunk-Version) 19 4.2.9. Results for upper operational band: LTE Band 7 20 4.2.10. Results for operational band: LTE Band 7 – Set-up 2 (Roof-Version , External antenna) 21 4.2.11. Results for operational band: LTE Band 7 – Set-up 3 (Roof-Version , Internal antenna) 21 4.2.12. Results for operational band: LTE Band 7 – Set-up 4 (Trunk-Version) 21 4.3. Measurement uncertainties .............................................................................................................................. 22 5. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 23 6. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 23 7. INSTRUMENTS AND ANCILLARY ................................................................................................................ 24 7.0.1. Test software and firmware of equipment 24 7.0.2. Single instruments and test systems 25 7.0.3. Legend 27 8. VERSIONS OF TEST REPORTS (CHANGE HISTORY) ............................................................................. 27 CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 3 of 27 Table of annex Total pages Annex 2: External photographs - separate document 1-0438_15-01-01_AnnexA 7 Annex 3: Internal photos: to be supplied by applicant -- Annex 4: Test set-up photographs – separate document 1-0438_15-01-01_AnnexC 5 Annex 5: Separate document applicant’s document “Tune-Up Information for Peiker 2G/3G LTE-NAD module type V1140-104-1, Rev. 1.1” 6 The listed attachments are an integral part of this report. CETECOM_TR_15_1_0006302_03a

cErecom" Test Report TR—15—1—0006302—03a, Page 4 of27 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. Also we refer on special conditions which the applicant should fulfill according §2.927 to §2.948, special focus regarding modification of the equipment and availability of sample equipment for market surveilance tests. The Equipment Under Test (in this report, hereinafter referred as EUT) supports radiofrequency technologies. This test report shows results for W—CDMA technologies only. Other implemented wireless technologies were not considered within this test report. The presented EUT is a variant ofallready approved wireless module of type V1140—104 with FCC ID: QWY—V1140—104 and IC no. 6588A—V1140104. Pis. compare also official documents showing main differences. Delta tests apply in order to verify the compliance, however a new certification is intended. Following tests have been performed to show compliance with applicable FCC Part 2.1091 and FCC Part 1.1310 of the FCC CFR 47 Rules.. 1.1. TX mode, tests overview FCC Part 2.1091 Dli\;og.rzfm Test Pat References & Limits EUT |EUT op— n Cases FCC Standard Test limits set—up mode group Antenna RF Power 5 5 passed ~ (conducted) terminal §2.1046 N/A 1 1407 Remark 1 (conducted) §2.1046 o ¢ 7 Watt ERP §22.913(@)(2) passed RF Power : pedigeg, Cubinet §24.232(c) <2war (Emp)| _‘ 1Aoi+ Remark 2 « <2 Watt §27.50(b)(2) (ERP) frc}}?ilx?c FCC: §1.1310 mz Exposure. Catiner §1.1310 Table 1, Limits , 11,7 Passed post §2.1091 for General Remark 3 Evaluation Pooulstion (MPE) P Remarks: 1.) See separate test reports 1—0438_15—01—02, 1—0438_15—01—04 and 1—0438_15—01—05 and corresponding annexes 1— 0438_15—01—01 A and C 2.) Calculated only (with known antenna gain) 3.) Based on info delivered by applicant, see annex 5 Dipl.—Ing. Rachid Acharkaoui [fi)l.-lng. Christian Lorenz Responsible for test section Responsible for test report CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 5 of 27 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. R. Acharkaoui Deputy: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report and project leader: Dipl.-Ing. Christian Lorenz Receipt of EUT: 2015-02-27 Date(s) of test: 2015-09-03 to 2015-09-15 Date of report: 2016-01-29 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 2.4. Applicant’s details Applicant’s name: peiker acustic GmbH & Co. KG Address: Max-Planck-Straße 32, 61381 Friedrichsdorf Germany Contact person: Mr. Martin Fleckenstein 2.5. Manufacturer’s details Manufacturer’s name: please see Applicant's details Address: please see Applicant's details CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 6 of 27 3. Equipment under test (EUT) 3.1. TECHNICAL DATA GSM/W-CDMA OF MAIN EUT DECLARED BY APPLICANT Main function LTE-NAD Wireless-Module Type V1140-104-1 TX-frequency range  GSM / GPRS / EGPRS Band 850: 824.2 – 848.8 MHz (Uplink), 869.2-1893.8 MHz (Downlink)  GSM / GPRS / EGPRS Band 1900: 1850.2 – 1909.8 MHz (Uplink), 1930.2-1989.8 MHz (Downlink)  UMTS Band II: 1852.4 – 1907.6 MHz (Uplink), 1932.4-1987.6 MHz (Downlink)  UMTS Band V: 826.4 – 846.6 MHz (Uplink), 871.4-891.6 MHz (Downlink) Type of modulation  GSM / GPRS / EGPRS Band 850: GMSK/8PSK  GSM / GPRS / EGPRS Band 1900: GMSK/8PSK  UMTS Band II: QPSK  UMTS Band V: QPSK Number of channels  GSM / GPRS / EGPRS Band 850: 128 – 192 – 251  GSM / GPRS / EGPRS Band 1900: 512 – 661 – 810  UMTS Band II: UARFCN range 9262 – 9400 – 9538  UMTS Band V: UARFCN range 4132 – 4183 – 4233 UMTS-HSPA connectivity  Uplink speed: 5.76 Mb/s (category 6) Emission designator(s) Values taken from certified module (FCC ID :) GSM / GPRS Band 850: 246KGXW E-GPRS Band 850: 241KG7W GSM / GPRS Band 1900: 246KGXW E-GPRS Band 1900: 242KG7W UMTS Band V: 4M15F9W Antenna Type  Integrated (enclosure)  External - dedicated, no RF- connector  External, separate RF-connector Value: (Data sheet for Fender antenna Fender Type 920325-102): max. 1dBi (-1.15dBd) Value: (Data sheet for External Antenna Model no. 64159, ECE-4G): GSM850/FDD/LTE Band 5: max. 3.7dBi (1.55dBd) Antenna Gain TX (main) GSM1900: max. 3.4 dBi LTE Band 7: max. 4.2 dBi Pls. see separate documents Value: (Data sheet for Internal Antenna Roof-Version): GSM850/FDD/LTE Band 5: max. 1.3dBi (-0.85dBd) GSM1900: max. 2.0 dBi LTE Band 7: max. 4.3 dBi  Not applicable Antenna Gain Dx (diversity) Value: (Data sheet) lower then TX (main)  No information from customer CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 7 of 27 MAX PEAK Output Power: PK-Values taken from FCC Part 22/24 reports: Radiated GSM / GPRS Band 850 32.63 dBm (PK) + 1.55dBd = 34.18 dBm ERP (PK) E-GPRS Band 850 26.04 dBm (PK) + 1.55 dBd = 27.59 dBm ERP (PK) GSM / GPRS Band 1900 29.41 dBm (PK) + 3.4 dBi = 32.81 dBm EIRP (PK) E-GPRS Band 1900 28.19 dBm (PK) + 3.4 dBi = 31.59 dBm EIRP (PK) UMTS_FDD Band V 27.16 dBm (PK) + 1.55 dBd = 28.71 dBm ERP (PK) MAX PEAK Output Power: PK-Values taken from FCC Part 22/24 reports: Conducted GSM / GPRS Band 850 1.832 W (PK) E-GPRS Band 850 0.401 W (PK) GSM / GPRS Band 1900 0.872 W (PK) E-GPRS Band 1900 0.659 W (PK) UMTS_FDD Band V 0.519 W (PK) Power supply  DC power only: 3.5 Volt to 4.0 V DC by external power supply Special EMI components -- Does EUT contain devices  yes susceptible to magnetic fields, e.g.  no Hall elements, electrodynamics microphones, etc.? EUT sample type  Production  Pre-Production  Engineering FCC label attached  yes  no CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 8 of 27 3.2. LTE TECHNICAL DATA OF MAIN EUT DECLARED BY APPLICANT TX-frequency range LTE Band 5: 824 - 849 MHz (Uplink), 869-894 MHz (Downlink) (E-UTRA operating bands) LTE Band 7: 2500 to 2570 MHz (Uplink), 2620 to 2690MHz (Downlink) Type of modulation QPSK, 16-QAM Data rates Cat3, Downlink: max. 100Mbps, Uplink: max. 50Mbps Number of channels LTE Band 5: UARFCN range 20400 – 20649 See Note about channels – Table 5.4.4-1 accord. 3GPP LTE Band 7: UARFCN range 20750 – 21449 not to be used TS36.521-1 depending on channel bandwidths Emission designator(s) Channel QPSK Modulation: 16-QAM Modulation (Max. Value across all operating bands) bandwidth 1.4 MHz 1M32G7W (LTE Bd. 5) 1M32W7D (LTE Bd. 5) 3 MHz 3M14G7D (LTE Bd. 5) 3M14W7D (LTE Bd. 5) 5 MHz 5M13G7D (LTE Bd. 7) 5M13W7D (LTE Bd.5) 10 MHz 10M1G7D (LTE Bd. 5) 10M2W7D (LTE Bd. 7) 15 MHz 15M1G7D (LTE Bd. 7) 15M1W7D (LTE Bd. 7) 20 MHz 20M0G7D (LTE Bd. 7) 20M0W7D (LTE Bd. 7) Antenna Gain  Values: LTE-Band 5: (Data sheet for External Antenna Model no. 64159, ECE-4G): GSM850/FDD/LTE Band 5: max. 3.7dBi (1.55dBd) LTE Band 7: max. 4.2 dBi External Antenna, max. 4.3dBi Internal Antenna MAX Output Power: Radiated LTE-Band 5 22.69 dBm (AV) + 1.55dBd = 24.24 dBm ERP (AV) LTE-Band 7 22.57 dBm (AV) + 4.3 dBi = 26.87 dBm EIRP (AV) MAX. Output Power: Conducted LTE-Band 5 0.186 W (AV) LTE Band 7 0.181 W (AV) Power supply  DC power only: 3.5 Volt to 4.0 V DC by external power supply Special EMI components -- Does EUT contain devices  yes susceptible to magnetic fields, e.g.  no Hall elements, electrodynamics microphones, etc.? EUT sample type  Production  Pre-Production  Engineering FCC label attached  yes  no CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 9 of 27 3.3. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware status software status tion*) M9615A- V1140-104- EUT A NAD Module V1140-104-1 -- CETWTDZM- 1_Ver. 1 6.3.100105 Automotive Antenna 64154 EUT B -- -- -- 4G Roof-Pod ECE-4G Version EUT C Fender Antenna 920 325-102 -- LTE worldwide -- *) EUT short description is used to simplify the identification of the EUT in this test report. 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) LTE-NAD Evaluation AE 1 Testboard LP1307-1 -- -- Board AE 2 Microphone KL1/B 9263744 -- -- AE 3 Loudspeaker KL1/B #1 4Ω/6Watt -- For EUT B AE 4 Small Ground-Plane -- -- -- 30cm diameter AE 5 DC power cable For AE 1 -- 1m long -- AE 6 Notebook Dell Lattitude D2120 #Test PC6 -- Windows 7 AE 7 USB cable Mini-USB -- 1m long -- *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 10 of 27 3.5. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) set. 1 EUT A + AE1 + AE 5 + AE 6 + AE 7 Set-up for conductedRF-tests. Roof antenna set-up: external antenna set. 2 Based on document for Antenna Model no. 64159 EUT A + EUT B (ECE-4G) Set-up to be defined with ATM-01 R2-[xxx]-[yy] Roof antenna set-up: internal antenna Product ID: 2609-07x-xxx-51 Based on document Advanced Telecommunication set. 3 module (ATM) Roof-Version, Rev. 3.0, 09.12.2015 EUT A + EUT C ATM Trunk Version set-up Set-up to be defined with Based on document “Advanced set. 4 ATM-01 T2-[xxx]-[yy] Telecommunication Module (ATM) Trunk Product ID: 2609-07x-xxx-51 Version, Rev. 2.0, from 09.12.2015 *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 11 of 27 3.6. EUT operating modes EUT Description of Additional information operating operating modes mode no.*) GPRS 850 A communication link is established between the mobile station and the test op. 1 Data simulator. The transmitter is operated at its maximum rated output Traffic channels power: 33 dBm (power class 4; power control level 5). USF_Duty CYCLE set to = 100%, coding scheme CS-1 for GMSK modulation, slot 3 active, uplink gamma: 3 128/192/251 (33 dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link. E-GPRS 850 A communication link is established between the mobile station and the test op. 2 Data simulator. The transmitter is operated at its maximum rated output Traffic channels power: 33 dBm (power class 4; power control level 5). USF_Duty CYCLE set to = 100%, coding scheme MCS-5 for 8PSK modulation, slot 3 active, uplink gamma: 6 128/192/251 (27dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link. GPRS 1900 A communication link is established between the mobile station and the test op. 3 Data simulator. The transmitter is operated at its maximum rated output Traffic channels power: 30 dBm (power class 1; power control level 0). USF_Duty CYCLE set to = 100%, coding scheme CS-1 for GMSK modulation, slot 3 active, uplink gamma: 3 512/661/810 (30 dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link E-GPRS 1900 A communication link is established between the mobile station and the test op. 4 Data simulator. The transmitter is operated at its maximum rated output traffic channels power: 30 dBm (power class 1; power control level 0). USF_Duty CYCLE set to = 100%, coding scheme MCS-5 for 8-PSK modulation, slot 3 active, uplink gamma: 5 512/661/810 (26 dBm). The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link. A communication link is established between the mobile station (UE) and the test op. 5 simulator. The transmitter is operated on its maximum rated output UMTS FDD- power class: 21 dBm or 24dBm nominal. Band V The input signal to the receiver is modulated with normal test modulation. The wanted RF input signal level to the receiver of the mobile station is set to a 12.2 kbps RMC level to provide a stable communication link according Table E5.1/Table E5.1A as described in 3GPP TS34.121, Annex E. The description of the settings performed can be found in chapter 3.5 *) EUT operating mode no. is used to simplify the test report. CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 12 of 27 3.7. LTE EUT operating modes EUT Description of Additional information operating operating modes mode no.*) A communication link is established between the mobile station (UE) and the test op. 6 simulator. The transmitter is operated on its maximum rated output power class: 23dBm nominal for QPSK Modulation scheme and 22dBm nominal LTE-Band 5 for 16-QAM modulation scheme. The input signal to the receiver is modulated with normal test modulation: QPSK or RMC Mode 16-QAM Modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link. A communication link is established between the mobile station (UE) and the test op. 7 simulator. The transmitter is operated on its maximum rated output power class: 23dBm nominal for QPSK Modulation scheme and 22dBm nominal LTE-Band 7 for 16-QAM modulation scheme. The input signal to the receiver is modulated with normal test modulation: QPSK or RMC Mode 16-QAM Modulation. The wanted RF input signal level to the receiver of the mobile station is set to a level to provide a stable communication link. *) EUT operating mode no. is used to simplify the test report. 3.8. Configuration of cables used for testing Cable S/N HW Cable length number Item Type serial number hardware status Cable 1 TRX-Antenna cable -- -- -- 1m Cable 2 DRX antenna cable -- -- -- 1m Cable 3 GPS Antenna -- -- -- 1m Cable 4 DC power cable -- -- -- 1m Cable 5 Loudspeaker cable -- -- -- 2m long CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 13 of 27 4. Measurements 4.1. Radio Frequency Exposure Evaluation §2.1091 4.1.1. Test location and equipment (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  Please see Chapter. 2.2.2  Please see Chapter. 2.2.3 For Evaluation instruments are not needed. Results are determined by calculation based on applicants delivered Tune-Up procedure. 4.1.2. Requirements The criteria used for the evaluation of human exposure to radio frequency radiation is table 1 according FCC §1.1310. FCC: §1.1310 As the mobile equipment is authorized under Part 22 (Subpart H) and Part 24 of the FCC Rules, it is subject for evaluation of the RF exposure prior to equipment authorization. Further information on evaluating compliance with these limits can be found in the FCC’s OST/OET Bulletin Number 65, ‘‘Evaluating Compliance with FCC-Specified Guidelines for Human Exposure to Radiofrequency Radiation.’’ For purposes of these requirements mobile devices are defined by the FCC as transmitters designed to be used FCC § 2.1091 in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between radiating structures and the body of the user or nearby persons. These devices are normally evaluated for exposure potential with relation to the MPE limits given in Table 1 of Appendix A. 4.1.2.1. Valid for FCC Table 1: LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time [MHz) [V/m] [A/m] [mW/cm²] [minutes] 30 - 300 61.4 0.163 1.0 6 300 - 1500 - f/300 6 1500 - 100,000 - 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3 – 1.34 614 1.63 *(100) 30 1.34 – 30 824/f 2.19/f *(180/f²) 30 30 - 300 27.5 0.073 0.2 30 300 - 1500 - - f/1500 30 1500 – 100,0 - - 1.0 30 For given Power density limit at a single frequency (accord. Table 1 Limits) the maximum antenna gain can be calculated. The used equation to predict the power density in the far-field of one single radiating antenna can be made by following equation: EIRP P  G S  4R 2 4R 2 S  4R 2 GNUMERIC  P CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 14 of 27 4.1.3. General Limits: Cellular Radiotelephone Service (subpart H of part 22) FCC: §1.1307 Non-building-mounted antennas: height above ground level to lowest point of antenna < 10 m and total power of all channels > 1000 W ERP (1640 W EIRP) Personal Communications Services (part 24) FCC §1.1307 Broadband PCS (subpart E): non-building-mounted antennas: height above ground level to lowest point of antenna < 10 m and total power of all channels > 2000 W ERP (3280 W EIRP) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Table 1(B) Limits for General Population/Uncontrolled Exposure FCC §1.1310 300–1500 MHz: f/1500 mW/cm² 1500–100,000 MHz: 1.0 mW/cm² Subject to routine evaluation is required when the device operate at frequencies of 1.5 GHz or below and FCC §2.1091 their effective radiated power (ERP) is 1.5 watts or more, or if they operate at frequencies above 1.5 GHz and their ERP is 3 watts or more. (a) Base stations are limited to 1640 watts peak equivalent isotropically radiated power (e.i.r.p.) with an FCC §24.232 antenna height up to 300 meters HAAT. b) Mobile/portable stations are limited to 2 watts e.i.r.p. peak power, … (a) Maximum ERP. The effective radiated power (ERP) of base transmitters and cellular repeaters must not FCC §22.913 exceed 500 Watts. The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts. (h) The following power limits shall apply in the BRS and EBS: FCC §27.50 ((2) Mobile and other user stations. Mobile stations are limited to 2.0 watts EIRP. All user stations are (h )(2) limited to 2.0 watts transmitter output power. KDBs No. 447498 D01 v05r02 4.1.4. Evaluation Method Valid for GSM/GPRS/EDGE mode: • Average burst power (slot power) and peak were measured (see separate report for GSM/GPRS/E-GPRS technology) • Only one uplink slot (1 TX) was measured. 4 TX slots are maximum possible for this device and calculated as worst- case • A duty-cycle correction factor of 10*log10 (max. number of possible active slots / 8 slots) were applied Please find in the following tables the calculations based on applicants tune-up information for the power values. Also the maximum admissible allowed antenna gain is calculated which is not exceeding the MPE limit for fixed and mobile operations. Valid for W-CDMA/LTE operating modes: • The power was checked on 3 frequencies (lowest/middle/highest) within each operable FDD-band (see separate report for W-CDMA technology) and the results compared to applicant’s declared power values (tune-up info). A RMS detector was used. • No duty-cycle correction factor is applicable The calculations are based on applicants tune-up information, pls. see Annex 5. CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 15 of 27 4.2. Results for fixed and mobile operations 4.2.1. Results for operational band: GSM850, FDD band 5 and LTE FDD band 5 4.2.1.1. Max. Antenna Gain consideration, set-up 2 Distance 20 cm Operating Frequency on Declared Max. positive Antenna Calculated Duty Declared Equivalent EIRP MPE Lim it MPE-Value Margin to Mode channel m axim um tolerance Gain m axim um cycle Maxim um (m axim um EIRP accord. lim it: Max. conducted according EIRP EIRP x duty cycle) Table 1 Fraction for Fraction- output m anufacturer (declared+ pow er Tune-up+ Co-Location Value within antenna (m W) calculations Frequency- Gain) Band (MHz) (dBm ) (dB) (dBd) (dBm ) % (W) (m W/cm ^2) (m W/cm ^2) (m W/cm ^2) 824,2 32,5 1,5 0 34,0 2,512 1256 0,5495 0,4098 0,1397 0,7458 GSM/GPRS (PK) 837 32,5 1,5 0 34,0 50% 2,512 1256 0,5580 0,4098 0,1482 0,7344 0,7458 848,8 32,5 1,5 0 34,0 2,512 1256 0,5659 0,4098 0,1561 0,7242 824,2 26,5 2,5 0 29,0 0,794 397 0,5495 0,1296 0,4199 0,2358 EDGE (PK) 837 26,5 2,5 0 29,0 50% 0,794 397 0,5580 0,1296 0,4284 0,2322 0,2358 848,8 26,5 2,5 0 29,0 0,794 397 0,5659 0,1296 0,4363 0,2290 WCDMA 826,4 23,0 2,0 0 25,0 0,316 316 0,5509 0,1032 0,4478 0,1873 FDD Band 5 836,4 23,0 2,0 0 25,0 100% 0,316 316 0,5576 0,1032 0,4544 0,1850 0,1873 (RMS-Value) 846,6 23,0 2,0 0 25,0 0,316 316 0,5644 0,1032 0,4612 0,1828 LTE Band 5 824,7 23,0 2,0 0 25,0 0,316 316 0,5498 0,1032 0,4466 0,1877 (QPSK, #RB=1, RMS- 836,5 23,0 2,0 0 25,0 100% 0,316 316 0,5577 0,1032 0,4545 0,1850 0,1877 Value) 848,3 23,0 2,0 0 25,0 0,316 316 0,5655 0,1032 0,4624 0,1824 LTE Band 5 824,7 23,0 2,0 0 25,0 0,316 316 0,5498 0,1032 0,4466 0,1877 (16QAM, #RB=1, RMS- 836,5 23,0 2,0 0 25,0 100% 0,316 316 0,5577 0,1032 0,4545 0,1850 0,1877 Value) 848,3 23,0 2,0 0 25,0 0,316 316 0,5655 0,1032 0,4624 0,1824 Maxim um calculated MPE value: Low est MPE-Lim it in 0,5495 [m W/cm ^2] Frequency-Band: Highest MPE value in 0,4098 [m W/cm ^2] frequency-band: Low est m argin to lim it 0,1397 [m W/cm ^2] in frequency band: Maximum antenna gain considerations for fixed/mobile operations for complying with limits: Maximum pow er input to the antenna incl. Duty cycle [mW]: P 1256 (Avg. Burst Pow er or RMS) R Distance [cm]: 20 MPE limit acc. §1.1310 for uncontrolled exposure [mW/cm²]: S 0,55 (FCC use mW/cm²) G1 Maximum Antenna gain to comply w ith MPE limit [dBi]: 3,42 (For G1 the low est measured channel to reach minimum ant. Gain selected) ERP pow er limit according to §2.1091 [W]: 1,50 (Avg. Burst Pow er or RMS) G2 Max. Antenna gain to comply w ith limit incl. Duty cycle [dBi]: 2,92 (For G2 select the max. Avg. Burst Pow er or RMS value incl. Duty cycle) ERP pow er limit according to §22.913 [W ERP]: 7,00 G3 Max. Antenna gain to comply w ith limit [dBi]: 6,60 (For G3 select the max. Average burst pow er value excluding Duty cycle) G850 MHz band Min (G1, G2, G3) [dBi] 2,92 Sum m arized The max. ant. gain for mobile operation at 700/850MHz band to comply with MPE and EIRP limits incl. path loss results: shall not exceed (dBi): 2,92 CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 16 of 27 4.2.2. Results for operational band: GSM850, FDD band 5 and LTE FDD band 5 – Set-up 3 (Roof-Version , External antenna) Distance 20 cm Operating Frequency on Declared Max. positive External Path Loss Uncertainty of Calculated Duty Declared Equivalent EIRP MPE Lim it MPE-Value Margin to Mode channel m axim um tolerance Antenna Module to Path-Loss m axim um cycle Maxim um (m axim um EIRP accord. lim it: Max. conducted according Gain Ext. EIRP EIRP x duty cycle) Table 1 Fraction for Fraction- output m anufacturer Antenna (declared+ pow er (MIMO1) Tune-up+ Co-Location Value within antenna (m W) calculations Frequency- (dB) (dB) Gain) Band (MHz) (dBm ) (dB) (dBd) (dBm ) % (W) (m W/cm ^2) (m W/cm ^2) (m W/cm ^2) 824,2 32,5 1,5 1,55 2,8 0,25 33,0 1,995 998 0,5495 0,3255 0,2240 0,5924 GSM/GPRS (PK) 837 32,5 1,5 1,55 2,8 0,25 33,0 50% 1,995 998 0,5580 0,3255 0,2325 0,5833 0,5924 848,8 32,5 1,5 1,55 2,8 0,25 33,0 1,995 998 0,5659 0,3255 0,2404 0,5752 824,2 26,5 2,5 1,55 2,8 0,25 28,0 0,631 315 0,5495 0,1029 0,4465 0,1873 EDGE (PK) 837 26,5 2,5 1,55 2,8 0,25 28,0 50% 0,631 315 0,5580 0,1029 0,4551 0,1845 0,1873 848,8 26,5 2,5 1,55 2,8 0,25 28,0 0,631 315 0,5659 0,1029 0,4629 0,1819 WCDMA 826,4 23,0 2,0 1,55 2,8 0,25 24,0 0,251 251 0,5509 0,0820 0,4690 0,1488 FDD Band 5 836,4 23,0 2,0 1,55 2,8 0,25 24,0 100% 0,251 251 0,5576 0,0820 0,4756 0,1470 0,1488 (RMS-Value) 846,6 23,0 2,0 1,55 2,8 0,25 24,0 0,251 251 0,5644 0,0820 0,4824 0,1452 LTE Band 5 824,7 23,0 2,0 1,55 2,8 0,25 24,0 0,251 251 0,5498 0,0820 0,4678 0,1491 (QPSK, #RB=1, RMS- 836,5 23,0 2,0 1,55 2,8 0,25 24,0 100% 0,251 251 0,5577 0,0820 0,4757 0,1470 0,1491 Value) 848,3 23,0 2,0 1,55 2,8 0,25 24,0 0,251 251 0,5655 0,0820 0,4836 0,1449 LTE Band 5 824,7 23,0 2,0 1,55 2,8 0,25 24,0 0,251 251 0,5498 0,0820 0,4678 0,1491 (16QAM, #RB=1, RMS- 836,5 23,0 2,0 1,55 2,8 0,25 24,0 100% 0,251 251 0,5577 0,0820 0,4757 0,1470 0,1491 Value) 848,3 23,0 2,0 1,55 2,8 0,25 24,0 0,251 251 0,5655 0,0820 0,4836 0,1449 Maxim um calculated MPE value: Low est MPE-Lim it in 0,5495 [m W/cm ^2] Frequency-Band: Highest MPE value in 0,3255 [m W/cm ^2] frequency-band: Low est m argin to lim it 0,2240 [m W/cm ^2] in frequency band: 4.2.3. Results for operational band: GSM850, FDD band 5 and LTE FDD band 5 – Set-up 4 (Roof-Version , Internal antenna) Distance 20 cm Operating Frequency on Declared Max. positive Internal Path Loss Uncertainty of Calculated Duty Declared Equivalent EIRP MPE Lim it MPE-Value Margin to Mode channel m axim um tolerance Antenna Module to Path-Loss m axim um cycle Maxim um (m axim um EIRP accord. lim it: Max. conducted according Gain Ext. EIRP EIRP x duty cycle) Table 1 Fraction for Fraction- output m anufacturer Antenna (declared+ pow er (MIMO1) Tune-up+ Co-Location Value within antenna (m W) calculations Frequency- (dB) (dB) Gain) Band (MHz) (dBm ) (dB) (dBd) (dBm ) % (W) (m W/cm ^2) (m W/cm ^2) (m W/cm ^2) 824,2 32,5 1,5 -0,85 0,7 0,25 32,7 1,862 931 0,5495 0,3038 0,2457 0,5528 GSM/GPRS (PK) 837 32,5 1,5 -0,85 0,7 0,25 32,7 50% 1,862 931 0,5580 0,3038 0,2542 0,5444 0,5528 848,8 32,5 1,5 -0,85 0,7 0,25 32,7 1,862 931 0,5659 0,3038 0,2621 0,5368 824,2 26,5 2,5 -0,85 0,7 0,25 27,7 0,589 294 0,5495 0,0961 0,4534 0,1748 EDGE (PK) 837 26,5 2,5 -0,85 0,7 0,25 27,7 50% 0,589 294 0,5580 0,0961 0,4619 0,1722 0,1748 848,8 26,5 2,5 -0,85 0,7 0,25 27,7 0,589 294 0,5659 0,0961 0,4698 0,1698 WCDMA 826,4 23,0 2,0 -0,85 0,7 0,25 23,7 0,234 234 0,5509 0,0765 0,4744 0,1388 FDD Band 5 836,4 23,0 2,0 -0,85 0,7 0,25 23,7 100% 0,234 234 0,5576 0,0765 0,4811 0,1372 0,1388 (RMS-Value) 846,6 23,0 2,0 -0,85 0,7 0,25 23,7 0,234 234 0,5644 0,0765 0,4879 0,1355 LTE Band 5 824,7 23,0 2,0 -0,85 0,7 0,25 23,7 0,234 234 0,5498 0,0765 0,4733 0,1391 (QPSK, #RB=1, RMS- 836,5 23,0 2,0 -0,85 0,7 0,25 23,7 100% 0,234 234 0,5577 0,0765 0,4812 0,1372 0,1391 Value) 848,3 23,0 2,0 -0,85 0,7 0,25 23,7 0,234 234 0,5655 0,0765 0,4890 0,1352 LTE Band 5 824,7 23,0 2,0 -0,85 0,7 0,25 23,7 0,234 234 0,5498 0,0765 0,4733 0,1391 (16QAM, #RB=1, RMS- 836,5 23,0 2,0 -0,85 0,7 0,25 23,7 100% 0,234 234 0,5577 0,0765 0,4812 0,1372 0,1391 Value) 848,3 23,0 2,0 -0,85 0,7 0,25 23,7 0,234 234 0,5655 0,0765 0,4890 0,1352 Maxim um calculated MPE value: Low est MPE-Lim it in 0,5495 [m W/cm ^2] Frequency-Band: Highest MPE value in 0,3038 [m W/cm ^2] frequency-band: Low est m argin to lim it 0,2457 [m W/cm ^2] in frequency band: CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 17 of 27 4.2.4. Results for operational band: GSM850, FDD5 and LTE band 5 – Set-up 5 (Trunk-Version) Distance 20 cm Operating Frequency on Declared Max. positive External Path Loss Uncertainty of Path Loss Calculated Duty Declared Equivalent EIRP MPE Lim it MPE-Value Margin to Mode channel m axim um tolerance Antenna Module to Path-Loss due cable m axim um cycle Maxim um (m axim um EIRP accord. lim it: Max. conducted according Gain Ext. loss to EIRP EIRP x duty cycle) Table 1 Fraction for Fraction- output m anufacturer Antenna external (declared+ pow er (MIMO1) antenna Tune-up+ Co-Location Value within antenna (m W) calculations Frequency- (dB) (dB) Gain) Band (MHz) (dBm ) (dB) (dBd) (dB) (dBm ) % (W) (m W/cm ^2) (m W/cm ^2) (m W/cm ^2) 824,2 32,5 1,5 -1,15 0,65 0,25 1,2 31,3 1,334 667 0,5495 0,2175 0,3319 0,3959 GSM/GPRS (PK) 837 32,5 1,5 -1,15 0,65 0,25 1,2 31,3 50% 1,334 667 0,5580 0,2175 0,3405 0,3899 0,3959 848,8 32,5 1,5 -1,15 0,65 0,25 1,2 31,3 1,334 667 0,5659 0,2175 0,3483 0,3844 824,2 26,5 2,5 -1,15 0,65 0,25 1,2 26,3 0,422 211 0,5495 0,0688 0,4807 0,1252 EDGE (PK) 837 26,5 2,5 -1,15 0,65 0,25 1,2 26,3 50% 0,422 211 0,5580 0,0688 0,4892 0,1233 0,1252 848,8 26,5 2,5 -1,15 0,65 0,25 1,2 26,3 0,422 211 0,5659 0,0688 0,4971 0,1216 WCDMA 826,4 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 0,168 168 0,5509 0,0548 0,4962 0,0994 FDD Band 5 836,4 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 100% 0,168 168 0,5576 0,0548 0,5028 0,0982 0,0994 (RMS-Value) 846,6 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 0,168 168 0,5644 0,0548 0,5096 0,0970 LTE Band 5 824,7 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 0,168 168 0,5498 0,0548 0,4950 0,0996 (QPSK, #RB=1, RMS- 836,5 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 100% 0,168 168 0,5577 0,0548 0,5029 0,0982 0,0996 Value) 848,3 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 0,168 168 0,5655 0,0548 0,5108 0,0969 LTE Band 5 824,7 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 0,168 168 0,5498 0,0548 0,4950 0,0996 (16QAM, #RB=1, RMS- 836,5 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 100% 0,168 168 0,5577 0,0548 0,5029 0,0982 0,0996 Value) 848,3 23,0 2,0 -1,15 0,65 0,25 1,2 22,3 0,168 168 0,5655 0,0548 0,5108 0,0969 Maxim um calculated MPE value: Low est MPE-Lim it in 0,5495 [m W/cm ^2] Frequency-Band: Highest MPE value in 0,2175 [m W/cm ^2] frequency-band: Low est m argin to lim it 0,3319 [m W/cm ^2] in frequency band: CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 18 of 27 4.2.5. Results for upper operational band: GSM1900 4.2.5.1. Max. Antenna Gain considerations for set-up 1 Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according (Measured+ EIRP x duty cycle) Fraction- Fraction for output pow er m anfacturer Tune-up+ Value Antenna Gain) Co-Location within calculations (dBm ) Frequency- (MHz) (dB) (dBi) (dBm ) % (W) (m W) (m W/cm ^2) (m W/cm ^2) (W/m ^2) Band 1850,2 29,5 0,0 31,0 1,259 629 1,0000 0,1252 0,8748 0,125228 GSM/GPRS (PK-Burst value) 1880,0 29,5 1,5 0,0 31,0 50% 1,259 629 1,0000 0,1252 0,8748 0,125228 0,1252276 1909,8 29,5 0,0 31,0 1,259 629 1,0000 0,1252 0,8748 0,125228 1850,2 25,5 0,0 28,0 0,631 315 1,0000 0,0628 0,9372 0,062762 EDGE 1880,0 25,5 2,5 0,0 28,0 50% 0,631 315 1,0000 0,0628 0,9372 0,062762 0,0627625 (PK-Burst value) 1909,8 25,5 0,0 28,0 0,631 315 1,0000 0,0628 0,9372 0,062762 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,1252 [m W/cm ^2] frequency-band: Margin to lim it in 0,8748 [m W/cm ^2] frequency-band: Maxim um antenna gain considerations for fixed/m obile operations for com plying w ith lim its: Maximum pow er input to the antenna incl. Duty cycle (mW): P 629 (Avg. Burst Pow er or RMS) R Distance (cm): 20 MPE limit acc. §1.1310 for uncontrolled exposure (mW/cm²): S 1,00 (FCC use mW/cm²) G1 Maximum Antenna gain to comply w ith MPE limit (dBi): 9,02 (For G1 the low est measured channel to reach minimum ant. Gain selected) ERP pow er limit according to §2.1091 [W]: (Avg. Burst Pow er or RMS) 3,00 G2 Max. Antenna gain to comply w ith this limit incl. Duty cycle (dBi): 8,93 (For G2 select the max. Avg. Burst Pow er or RMS value incl. Duty cycle) EIRP pow er limit according to §24.232 [W]: 2,00 G3 Max. Antenna gain to comply w ith this limit (dBi): 2,01 (For G3 select the max. Average burst pow er value excluding Duty cycle) Min (G1, G2, G3) (dBi) 2,01 Sum m arized The max. ant. gain for mobile operation at 1900 MHz band to comply with MPE and EIRP limits incl. path loss shall not exceed 2,01 results: (dBi): CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 19 of 27 4.2.6. Results for operational band: GSM1900 – Set-up 2 (Roof-Version , External antenna) Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Path Loss Uncertainty of Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance Module to Ext. Path-Loss m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according Antenna (Measured+ EIRP x duty cycle) Fraction- Fraction for output m anufacturer (MIMO1) Tune-up+ Value pow er Antenna Gain) Co-Location within (m W) calculations (MHz) (dB) (dBi) (m W/cm ^2) (W/m ^2) Frequency- (dBm ) (dB) (dB) (dBm ) % (W) (m W/cm ^2) Band 1850,2 29,5 3,40 5,00 0,25 29,65 0,923 461 1,0000 0,0918 0,9082 0,091770 GSM/GPRS (PK-Burst value) 1880,0 29,5 1,50 3,40 5,00 0,25 29,65 50% 0,923 461 1,0000 0,0918 0,9082 0,091770 0,0917699 1909,8 29,5 3,40 5,00 0,25 29,65 0,923 461 1,0000 0,0918 0,9082 0,091770 1850,2 25,5 3,40 5,00 0,25 26,65 0,462 231 1,0000 0,0460 0,9540 0,045994 EDGE (PK-Burst value) 1880,0 25,5 2,50 3,40 5,00 0,25 26,65 50% 0,462 231 1,0000 0,0460 0,9540 0,045994 0,0459939 1909,8 25,5 3,40 5,00 0,25 26,65 0,462 231 1,0000 0,0460 0,9540 0,045994 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,0918 [m W/cm ^2] frequency-band: Margin to lim it in 0,9082 [m W/cm ^2] frequency-band: 4.2.7. Results for operational band: GSM1900 – Set-up 3 (Roof-Version , internal antenna) Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Path Loss Uncertainty of Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance Module to Ext. Path-Loss m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according Antenna (Measured+ EIRP x duty cycle) Fraction- Fraction for output m anufacturer (MIMO1) Tune-up+ Value pow er Antenna Gain) Co-Location within (m W) calculations (MHz) (dB) (dBi) (m W/cm ^2) (W/m ^2) Frequency- (dBm ) (dB) (dB) (dBm ) % (W) (m W/cm ^2) Band 1850,2 29,5 2,0 1,1 0,25 32,15 1,641 820 1,0000 0,1632 0,8368 0,163192 GSM/GPRS (PK-Burst value) 1880,0 29,5 1,50 2,0 1,1 0,25 32,15 50% 1,641 820 1,0000 0,1632 0,8368 0,163192 0,1631925 1909,8 29,5 2,0 1,1 0,25 32,15 1,641 820 1,0000 0,1632 0,8368 0,163192 1850,2 25,5 2,0 1,1 0,25 29,15 0,822 411 1,0000 0,0818 0,9182 0,081790 EDGE (PK-Burst value) 1880,0 25,5 2,50 2,0 1,1 0,25 29,15 50% 0,822 411 1,0000 0,0818 0,9182 0,081790 0,0817900 1909,8 25,5 2,0 1,1 0,25 29,15 0,822 411 1,0000 0,0818 0,9182 0,081790 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,1632 [m W/cm ^2] frequency-band: Margin to lim it in 0,8368 [m W/cm ^2] frequency-band: 4.2.8. Results for operational band: GSM1900 – Set-up 4 (Trunk-Version) Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Path Loss Uncertainty of Path Loss due Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance Module to Ext. Path-Loss cable loss to m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according Antenna external (Measured+ EIRP x duty cycle) Fraction- Fraction for output m anufacturer (MIMO1) antenna Tune-up+ Value pow er Antenna Gain) Co-Location within (m W) calculations (MHz) (dB) (dBi) (dB) (m W/cm ^2) (W/m ^2) Frequency- (dBm ) (dB) (dB) (dBm ) % (W) (m W/cm ^2) Band 1850,2 29,5 1,00 0,90 0,25 2,16 29,19 0,830 415 1,0000 0,0825 0,9175 0,082547 GSM/GPRS (PK-Burst value) 1880,0 29,5 1,50 1,00 0,90 0,25 2,16 29,19 50% 0,830 415 1,0000 0,0825 0,9175 0,082547 0,0825468 1909,8 29,5 1,00 0,90 0,25 2,16 29,19 0,830 415 1,0000 0,0825 0,9175 0,082547 1850,2 25,5 1,00 0,90 0,25 2,16 26,19 0,416 208 1,0000 0,0414 0,9586 0,041371 EDGE (PK-Burst value) 1880,0 25,5 2,50 1,00 0,90 0,25 2,16 26,19 50% 0,416 208 1,0000 0,0414 0,9586 0,041371 0,0413714 1909,8 25,5 1,00 0,90 0,25 2,16 26,19 0,416 208 1,0000 0,0414 0,9586 0,041371 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,0825 [m W/cm ^2] frequency-band: Margin to lim it in 0,9175 [m W/cm ^2] frequency-band: CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 20 of 27 4.2.9. Results for upper operational band: LTE Band 7 4.2.9.1. Max. Antenna Gain considerations for set-up 1 Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according (Measured+ EIRP x duty cycle) Fraction- Fraction for output pow er m anfacturer Tune-up+ Value Antenna Gain) Co-Location within calculations (dBm ) Frequency- (MHz) (dB) (dBi) (dBm ) % (W) (m W) (m W/cm ^2) (m W/cm ^2) (W/m ^2) Band LTE Band 7 2500,7 23,0 0,0 25,0 0,316 316 1,0000 0,0629 0,9371 0,062912 (QPSK, #1RB, RMS- 2535,0 23,0 2,0 0,0 25,0 100% 0,316 316 1,0000 0,0629 0,9371 0,062912 0,0629115 Value) 2569,3 0,316 316 1,0000 0,0629 0,9371 23,0 0,0 25,0 0,062912 LTE Band 7 2500,7 23,0 0,0 25,0 0,316 316 1,0000 0,0629 0,9371 0,062912 (16QAM, #1RB, RMS- 2535,0 23,0 2,0 0,0 25,0 100% 0,316 316 1,0000 0,0629 0,9371 0,062912 0,0629115 Value) 2569,3 0,316 316 1,0000 0,0629 0,9371 23,0 0,0 25,0 0,062912 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,0629 [m W/cm ^2] frequency-band: Margin to lim it in 0,9371 [m W/cm ^2] frequency-band: Maxim um antenna gain considerations for fixed/m obile operations for com plying w ith lim its: Maximum pow er input to the antenna incl. Duty cycle (mW): P 316 (Avg. Burst Pow er or RMS) R Distance (cm): 20 MPE limit acc. §1.1310 for uncontrolled exposure (mW/cm²): S 1,00 (FCC use mW/cm²) G1 Maximum Antenna gain to comply w ith MPE limit (dBi): 12,01 (For G1 the low est measured channel to reach minimum ant. Gain selected) ERP pow er limit according to §2.1091 [W]: (Avg. Burst Pow er or RMS) 3,00 G2 Max. Antenna gain to comply w ith this limit incl. Duty cycle (dBi): 11,92 (For G2 select the max. Avg. Burst Pow er or RMS value incl. Duty cycle) EIRP pow er limit according to §27.50(h)(2) [W]: 2,00 G3 Max. Antenna gain to comply w ith this limit (dBi): 8,01 (For G3 select the max. Average burst pow er value excluding Duty cycle) Min (G1, G2, G3) (dBi) 8,01 Sum m arized The max. ant. gain for mobile operation at 1900 MHz band to comply with MPE and EIRP limits incl. path loss shall not exceed 8,01 results: (dBi): CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 21 of 27 4.2.10. Results for operational band: LTE Band 7 – Set-up 2 (Roof-Version , External antenna) Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Path Loss Uncertainty of Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance Module to Ext. Path-Loss m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according Antenna (Measured+ EIRP x duty cycle) Fraction- Fraction for output pow er m anufacturer (MIMO1) Tune-up+ Value Antenna Gain) Co-Location within (dBm ) (m W) calculations (MHz) (dBm ) (dB) (dBi) (m W/cm ^2) (W/m ^2) Frequency- (dB) (dB) % (W) (m W/cm ^2) Band LTE Band 7 2500,7 23,0 4,20 5,20 0,25 24,25 0,266 266 1,0000 0,0529 0,9471 0,052933 (QPSK, #1RB, RMS- 2535,0 23,0 2,00 4,20 5,20 0,25 24,25 100% 0,266 266 1,0000 0,0529 0,9471 0,052933 0,0529334 Value) 2569,3 0,266 266 1,0000 0,0529 0,9471 23,0 4,20 5,20 0,25 24,25 0,052933 LTE Band 7 2500,7 23,0 4,20 5,20 0,25 24,25 0,266 266 1,0000 0,0529 0,9471 0,052933 (16QAM, #1RB, RMS- 2535,0 23,0 2,00 4,20 5,20 0,25 24,25 100% 0,266 266 1,0000 0,0529 0,9471 0,052933 0,0529700 Value) 2569,3 0,266 266 1,0000 0,0530 0,9470 23,0 4,20 5,20 0,25 24,25 0,052970 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,0530 [m W/cm ^2] frequency-band: Margin to lim it in 0,9470 [m W/cm ^2] frequency-band: 4.2.11. Results for operational band: LTE Band 7 – Set-up 3 (Roof-Version , Internal antenna) Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Path Loss Uncertainty of Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance Module to Ext. Path-Loss m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according Antenna (Measured+ EIRP x duty cycle) Fraction- Fraction for output pow er m anufacturer (MIMO1) Tune-up+ Value Antenna Gain) Co-Location within (dBm ) (m W) calculations (MHz) (dBm ) (dB) (dBi) (m W/cm ^2) (W/m ^2) Frequency- (dB) (dB) % (W) (m W/cm ^2) Band LTE Band 7 2500,7 23,0 4,30 1,60 0,25 27,95 0,624 624 1,0000 0,1241 0,8759 0,124088 (QPSK, #1RB, RMS- 2535,0 23,0 2,00 4,30 1,60 0,25 27,95 100% 0,624 624 1,0000 0,1241 0,8759 0,124088 0,1240881 Value) 2569,3 0,624 624 1,0000 0,1241 0,8759 23,0 4,30 1,60 0,25 27,95 0,124088 LTE Band 7 2500,7 23,0 4,30 1,60 0,25 27,95 0,624 624 1,0000 0,1241 0,8759 0,124088 (16QAM, #1RB, RMS- 2535,0 23,0 2,00 4,30 1,60 0,25 27,95 100% 0,624 624 1,0000 0,1241 0,8759 0,124088 0,1241738 Value) 2569,3 0,624 624 1,0000 0,1242 0,8758 23,0 4,30 1,60 0,25 27,95 0,124174 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,1242 [m W/cm ^2] frequency-band: Margin to lim it in 0,8758 [m W/cm ^2] frequency-band: 4.2.12. Results for operational band: LTE Band 7 – Set-up 4 (Trunk-Version) Safety-Distance 20 cm Operation Mode Frequency Declared Max. positive Antenna Gain Path Loss Uncertainty of Path Loss due Declared Duty cycle Declared Equivalent EIRP MPE Lim it MPE-Value Margin to lim it: Max. on channel m axim um tolerance Module to Ext. Path-Loss cable loss to m axim um EIRP Maxim um (m axim um EIRP accord. Table 1 conducted according Antenna external (Measured+ EIRP x duty cycle) Fraction- Fraction for output pow er m anufacturer (MIMO1) antenna Tune-up+ Value Antenna Gain) Co-Location within (dBm ) (m W) calculations (MHz) (dBm ) (dB) (dBi) (dB) (m W/cm ^2) (W/m ^2) Frequency- (dB) (dB) % (W) (m W/cm ^2) Band LTE Band 7 2500,7 23,0 1,0 1,1 0,25 2,16 22,99 0,199 199 1,0000 0,0396 0,9604 0,039603 (QPSK, #1RB, RMS- 2535,0 23,0 2,00 1,0 1,1 0,25 2,16 22,99 100% 0,199 199 1,0000 0,0396 0,9604 0,039603 0,0396032 Value) 2569,3 0,199 199 1,0000 0,0396 0,9604 23,0 1,0 1,1 0,25 2,16 22,99 0,039603 LTE Band 7 2500,7 23,0 1,0 1,1 0,25 2,16 22,99 0,199 199 1,0000 0,0396 0,9604 0,039603 (16QAM, #1RB, RMS- 2535,0 23,0 2,00 1,0 1,1 0,25 2,16 22,99 100% 0,199 199 1,0000 0,0396 0,9604 0,039603 0,0396306 Value) 2569,3 0,199 199 1,0000 0,0396 0,9604 23,0 1,0 1,1 0,25 2,16 22,99 0,039631 Maxim um calculated MPE value: Low est MPE-Lim it in 1,0000 [m W/cm ^2] frequency-band: Highest MPE value in 0,0396 [m W/cm ^2] frequency-band: Margin to lim it in 0,9604 [m W/cm ^2] frequency-band: CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 22 of 27 4.3. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based on a RF-Measurement Reference Frequency range Remarks confidence level of 95% Conducted emissions 9 kHz - 150 kHz 4.0 dB CISPR 16-2-1 - (U CISPR) 150 kHz - 30 MHz 3.6 dB Radiated emissions 30 MHz - 1 GHz 4.2 dB CISPR 16-2-3 E-Field Enclosure 1 GHz - 18 GHz 5.1 dB Disturbance power CISPR 16-2-2 30 MHz - 300 MHz - - Substitution Power Output radiated - 30 MHz - 4 GHz 3.17 dB method Cel- Cel- Set-up No. BT1 W1 W2 C1 C2 Power Output conducted - 9 kHz - 12.75 GHz N/A 0.60 -- -- -- - 12.75 - 26.5GHz N/A 0.82 -- -- -- Conducted emissions - 9 kHz - 2.8 GHz 0.70 N/A -- -- -- N/A - not on RF-port 2.8 GHz - 12.75GHz 1.48 N/A -- -- -- applicable 12.75 GHz - 18GHz 1.81 N/A -- -- -- 18 GHz - 26.5GHz 1.83 N/A -- -- -- 0.1272 ppm (Delta Marker) Frequency Occupied bandwidth - 9 kHz - 4 GHz error 1.0 dB Power - 0.1272 ppm (Delta Marker) Frequency Emission bandwidth 9 kHz - 4 GHz error - See above: 0.70 dB Power Frequency stability - 9 kHz - 20 GHz 0.0636 ppm - 150 kHz - 30 MHz 5.0 dB Magnetic Radiated emissions 30 MHz - 1 GHz 4.2 dB field - Enclosure 1 GHz - 20 GHz 3.17 dB E-field Substitution Table: measurement uncertainties, valid for conducted/radiated measurements CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 23 of 27 5. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropically radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Dokuments from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power 6. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) FCC, Federal Communications (MRA US-EU 558 Radiated Measurements above 1 GHz, 3 m (FAR) Commission 0003) 348 Mains Ports Conducted Interference Measurements Laboratory Division, USA 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) IC, Industry Canada Certification 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) and Engineering Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 24 of 27 7. Instruments and Ancillary The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 7.0.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 053 Audio Analyzer UPA3 860612/022 Firm. V 4.3 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 140 Signal Generator SMHU 831314/006 Firm.= 3.21 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 264 Spectrum Analyzer FSEK 30 826939/005 Bios=2.1, Analyzer= 3.20 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 TSI 1.53 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 355 Power Meter URV 5 891310/027 Firm.= 1.31 365 10V Insertion Unit 50 Ohm URV5-Z2 100880 Eprom Data = 31.03.08 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - EMC 32 Ver. 9.15.00 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 9.15.00 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Firmware Bios 3.40 , Analyzer 3.40 Sp 2 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 25 of 27 7.0.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 30.04.2016 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 30.04.2016 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 30.04.2016 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 30.04.2017 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 31.03.2016 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO 36/12 M - 31.03.2017 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 30.04.2018 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 30.04.2018 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 30.04.2017 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 Helmholtz coil: 2x10 coils 090 Helmholtz coil: 2x10 coils in series - RWTÜV 24 M 4 31.03.2016 in 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 30.04.2018 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 30.04.2018 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 31.03.2016 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 30.04.2018 140 Signal Generator SMHU 831314/006 Rohde & Schwarz 24 M - 31.03.2016 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 31.03.2016 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 31.03.2016 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 31.03.2016 264 Spectrum Analyzer FSEK 30 826939/005 Rohde & Schwarz 12 M - 30.04.2016 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 31.03.2016 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 31.03.2016 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 30.04.2016 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 31.03.2017 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 31.03.2017 331 Climatic Test Chamber -40/+80 Grad HC 4055 43146 Heraeus Vötsch 24 M - 30.12.2016 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 31.03.2016 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 30.04.2017 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 355 Power Meter URV 5 891310/027 Rohde & Schwarz 24 M - 31.03.2016 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 30.04.2017 371 Bluetooth Tester CBT32 100153 R&S 24 M - 31.03.2016 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 24 M - 30.04.2017 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 30.04.2016 389 Digital Multimeter Keithley 2000 0583926 Keithley 24 M - 30.04.2017 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 30.04.2016 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 30.04.2016 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 31.03.2017 System EMI field (SAR) 441 CTC-SAR-EMI Cable Loss - CETECOM 12 M 5 30.01.2016 Cable 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 26 of 27 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 30.04.2016 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 31.03.2016 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 30.04.2018 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 30.04.2018 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 30.04.2017 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 31.07.2017 NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 30.04.2016 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 30.04.2017 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 30.04.2016 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 30.04.2016 548 Digital-Barometer GBP 2300 without Greisinger GmbH - - 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36 M - 31.07.2018 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2016 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 594 Wideband Radio Communication Tester CMW 500 101757 Rohde & Schwarz 12 M - 30.04.2016 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz 36 M - 31.03.2016 598 Spectrum Analyzer FSEM 30 (Reserve) 831259/013 Rohde & Schwarz 24 M - 30.04.2017 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 30.04.2017 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 30.04.2017 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 31.03.2016 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 24 M - 30.04.2017 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 642 Wideband Radio Communication Tester CMW 500 126089 Rohde&Schwarz 12 M - 30.04.2016 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 24 M - 31.03.2016 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 30.04.2016 Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 30.04.2017 Solutions 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 30.04.2016 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 24 M - 31.03.2016 697 Power Splitter ZN4PD-642W-S+ 165001445 Mini-Circuits - 2 CETECOM_TR_15_1_0006302_03a

Test Report TR-15-1-0006302-03a, Page 27 of 27 7.0.3. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring equipment result or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 8. Versions of test reports (change history) Version Applied changes Date of release -- Initial release 2016-01-29 -- -- -- CETECOM_TR_15_1_0006302_03a


Document Created: 2016-01-29 16:21:22
Document Modified: 2016-01-29 16:21:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC