UM

FCC ID: QWHULG10

Users Manual

Download: PDF
FCCID_4350572

Behringer Airplay Guitar ULG10
High-Performance 2.4 GHz Guitar Wireless System with
Ultra-Low Latency and Rechargeable Battery

Quick Start Guide
Important Safety Instructions
             WARNING: To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be
             performed by qualified service personnel.
1.  Read these instructions.                                               12. Use of a power supply or charger not recommended or sold by             18.        WARNING! To prevent possible hearing damage, do not
2.  Keep these instructions.                                                   the manufacturer may result in a risk of fire or injury to persons.           listen at high volume levels for long periods
3.  Heed all warnings.                                                     13. Do not use this apparatus in excess of its output rating.                              19. Correct disposal of this product: This symbol
4.  Follow all instructions.                                                   Overload outputs above rating may result in a risk of fire or                          indicates that this product must not be disposed of
5.  Do not use this apparatus near water.                                      injury to persons.                                                                     with household waste, according to the WEEE
6.  Clean only with dry cloth.                                             14. Do not use this apparatus if it is damaged or modified.                                Directive (2012/19/EU) and your national law. This
7.  Do not expose a power pack to fire or excessive temperature.               Damaged or modified batteries may exhibit unpredictable                 product should be taken to a collection center licensed for the
    Exposure to the fire or temperature above 100°C (212°F)                    behavior resulting in fire, explosion or risk of injury.                recycling of waste electrical and electronic equipment (EEE). The
    may cause explosion.                                                   15. Have servicing performed by a qualified repair person using             mishandling of this type of waste could have a possible negative
8. Do not expose this product to bright sunshine for a long time.              only identical replacement parts. This will ensure that the             impact on the environment and human health due to potentially
9. Do not disassemble this apparatus. Take it to a qualified service           safety of the product is maintained.                                    hazardous substances that are generally associated with EEE. At
    person when service or repair is required. Incorrect reassembly        16. Switch off this apparatus when not in use.                              the same time, your cooperation in the correct disposal of this
    may result in a risk of fire or injury to persons.                     17.      WARNING! Choking and Swallowing Hazard. Keep the                   product will contribute to the efficient use of natural resources. For
10. Please store this product in a clean and dry environment.                  product safely out of reach of children and pets. The small size        more information about where you can take your waste equipment
11. Charge it once a month (minimum).                                          and the internal battery present a choking and swallowing               for recycling, please contact your local city office, or your
                                                                               hazard. Failure to follow instructions may lead to permanent            household waste collection service.
                                                                               injury or death.

Features
                                                                1
                                                                 ⁄4" TS




BATTERY CHARGE/                                      ON/OFF
  CHANNEL LEDS
                           CHANNEL SELECT


Charging the Battery                                                                                             Selecting the Channel
     100% Charged                Approx 75%                 Approx 50%               Low Battery                        Channel 1                    Channel 2                Channel 3                 Channel 4



1.   The Battery Level LEDs will flash twice when each unit is turned ON.                                        1. Channel 1 is automatically selected each time the units are turned on.
2.   Fully charge each unit before using them for the first time.                                                2. Note: Use channel 1 unless you are picking up interference. Each unit must be
3.   If the level is low, attach the supplied dual cords to a computer USB output.                                  on the same channel, or they will not operate.
4.   CAUTION: Do not leave the units unattended while they are charging.                                         3. If required, press SEL on each unit to change to a different channel. All 4 LEDs
                                                                                                                    will flash twice and show the channel LED.
                                                                                                                                                        SEL      ON




     Micro USB
                                                                    USB                                          4. If the units are on different channels, then the 4 LEDs on the receiver will start to flash repeatedly
                                                                                                                    after a few seconds, until you select the correct channel.
                                                                                                                 5. The transmitter signals can be received by several receivers set to the same channel.
                                                                                                                    For example, the signal can be fed to 2 amplifiers simultaneously to
                                                                                                                    generate a stereo sound image.
                                                                                                                 6. To switch off the transmitter and receiver, first turn off your
                                                                                                                    power amplifier, and then set both on/off switches to the
                                                                                                                    OFF position.
A54-00001-76775


       Typical Installation                                                                                  Clipping Units together

                                                                    Instrument input

                                             RECEIVER

                                 MAXIMUM 30 M


                                                                                                                                                                      Units can be clipped together
                                                                                                                                                                      for tranportation and storage
        E-Bass       TRANSMITTER                          BEHRINGER ULTRABASS BT108



       Specifications
         RF Connection                                                                                  Power Supply
            Frequency                                             2.4 GHz                                                                                                      Internal rechargeable
                                                                                                            Type
            RF output power                                       9 dBm maximum                                                                                                750 mAh Lithium Battery
            Number of channels                                    4                                         Operating time per battery charge                                  Up to 6 hours
            Channel selection                                     SEL button on each unit                                                                                      Duo-pin USB charging
                                                                                                            Charging method
                                                                                                                                                                               cable supplied
            Channel indicator                                     4 LEDs
                                                                                                            Charge status indicators                                           4 LEDs
            Range                                                 30 meters maximum
         Audio
                                                                                                            Power switch                                                       On/Off slide switch
                                                                                                        Environmental
            Frequency range                                       20 Hz to 16 kHz
                                                                                                                                                                               5°C – 40°C
            Latency                                               ~ 5ms                                     Operating temperature range
                                                                                                                                                                               (41°F – 104°F)
            Digital signal parameters                             24 bit/ 48 kHz                        Physical (set)
            Transmitter audio input                               1/4" TS                                                                                                      40 x 72 x 32 mm x2
            Receiver audio output                                 1/4" TS                                   Dimensions (H x W x D)
                                                                                                                                                                               (0.13 x 0.24 x 0.10") x2
                                                                                                            Weight                                                             0.045 kg (0.02 lbs) x2




       LEGAL DISCLAIMER                                           Other important information
       Music Tribe accepts no liability for any loss which        1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting tannoy.com. Registering your
       may be suffered by any person who relies either               purchase using our simple online form helps us to process your repair claims more quickly and effi ciently. Also, read the terms and
       wholly or in part upon any description, photograph,           conditions of our warranty, if applicable.
       or statement contained herein. Technical specifications,   2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized
       appearances and other information are subject to              Fulfiller for your country listed under “Support” at tannoy.com. Should your country not be listed, please check if your problem can be
       change without notice. All trademarks are the property        dealt with by our “Online Support” which may also be found under “Support” at tannoy.com. Alternatively, please submit an online
       of their respective owners. Midas, Klark Teknik,              warranty claim at tannoy.com BEFORE returning the product.
       Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
       TC Helicon, Behringer, Bugera, Auratone and Coolaudio                                                                              15 of the FCC Rules. These limits are designed to provide
       are trademarks or registered trademarks of Music Tribe     FEDERAL COMMUNICATIONS                                                  reasonable protection against harmful interference in a
       Global Brands Ltd. © Music Tribe Global Brands Ltd.        COMMISSION COMPLIANCE                                                   residential installation. This equipment generates, uses and
                                                                                                                                          can radiate radio frequency energy and, if not installed and
       2019 All rights reserved.                                  INFORMATION                                                             used in accordance with the instructions, may cause harmful
                                                                                                                                          interference to radio communications. However, there is
                                                                                                                                          no guarantee that interference will not occur in a particular
       LIMITED WARRANTY                                                                                                                   installation. If this equipment does cause harmful interference
       For the applicable warranty terms and conditions                                                                                   to radio or
                                                                                   AIRPLAY GUITAR ULG10
       and additional information regarding Music Tribe’s                                                                                 television reception, which can be determined by turning the
       Limited Warranty, please see complete details online at                                                                            equipment off and on, the user is encouraged to try to correct
                                                                  Responsible Party Name:                     Music Tribe                 the interference by one or more of the following measures:
       musictribe.com/warranty.
                                                                                                              Commercial NV Inc.
                                                                                                                                          • Reorient or relocate the receiving antenna.
                                                                  Address:                                    5270 Procyon Street,
                                                                                                              Las Vegas, NV 89118,        • Increase the separation between the equipment and receiver.
       Zhongshan Eurotec Electronics Limited                                                                  USA.
       No. 10 Wanmei Road, South China Modern Chinese                                                                                     • Connect the equipment into an outlet on a circuit different
                                                                  Phone Number:                               +1 702 800 8290                 from that to which the receiver is connected.
       Medicine Park, Nanlang Town, 528451, Zhongshan City,
       Guangdong Province, China                                  FCC ID:                                     QWHULG10                    • Consult the dealer or an experienced radio/TV technician
                                                                                                                                              for help.
This device complies with Part 15 of the FCC Rules.               AIRPLAY GUITAR ULG10
Operation is subject to the following two conditions:                                                                                     Important information:
                                                                  complies with the FCC rules as mentioned in the
(1)This device may not cause harmful interference                 following paragraph:
(2)This device must accept any interference received,                                                                                     Changes or modifications to the equipment not expressly
including interference that may cause undesired operation.        This equipment has been tested and found to comply with                 approved by Music Tribe can void the user’s authority to use the
                                                                  the limits for a Class B digital device, pursuant to part               equipment.



Document Created: 2019-07-10 18:14:26
Document Modified: 2019-07-10 18:14:26

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC