15_BM-6602 UserMan

FCC ID: QWH-MTHP-02

Users Manual

Download: PDF
FCCID_4378106

Quick Start Guide HC 2000B Studio-Quality Wireless Headphones with Bluetooth* Connectivity Controls (8) (2) (9) (1) (6)(5)(4) (3) (7) (1) POWER button switches the headphones on and off. (6) BLUETOOTH LED shows the Bluetooth status (blinking blue and red = in pairing mode; (2) PLAY/PAUSE button begins and pauses audio blue = connected; blinking blue = audio playback. Secondary call functions include Answer playback underway). Call/End Call/Reject Call (press and hold). (7) CHARGE LED shows the charge status (3) MICRO USB jack is for charging rechargeable (red = charging; blue = fully charged). batteries. (8) FORWARD/VOLUME button can be used to (4) MICROPHONE can be used for talkback during increase volume (short press), skip to the next phone calls. song (long press), or begin/end a phone call on a (5) AUX IN stereo jack can be used to listen to audio from Bluetooth-connected mobile phone. external devices as normal wired headphones using (9) BACK/VOLUME button can be used to decrease audio cables with 3.5 mm stereo connectors. volume (short press) or skip to the previous song (long press). A54-00002-37750

Getting started 3. If the Bluetooth device prompts for a passcode, use “0000”. Power Supply connection. If the units are paired properly, you will hear an The unit is powered by a built-in, lithium-polymer rechargeable indication sound. If pairing is not successful within 10 minutes, battery. Charge the built-in battery for at least four hours before NOTE: If you want to connect your headphones to another To charge the internal battery, follow these steps: Bluetooth audio device, you need to disconnect the current device 1. Connect the smaller end of the supplied USB cable to the MICRO USB jack. Using A Bluetooth Device 2. Connect the other end to a powered USB jack on your computer or an AC power supply (not included). 1. When successfully paired, sound from your Bluetooth device will be audible through the headphones 3. The CHARGE LED indicator will change color to red during charging. 2. Press the PLAY/PAUSE button to pause playback. Press again to resume playback. 4. When fully charged, the CHARGE LED indicator will turn blue. 3. Short press the FORWARD/BACK buttons to adjust the Warnings: headphone volume. You can also adjust the volume directly on • your paired Bluetooth device. • While using the built-in battery, the environmental 4. Long press the FORWARD/BACK buttons to select your desired temperature should be 5° C (41° F) to 35° C (95° F). • To get the longest service life for the built-in battery, charge at NOTE: The BLUETOOTH LED indicator will blink blue during playback. room temperature. • Attention should be drawn the environmental aspects of Receiving A Phone Call battery disposal. These headphones are equipped with a built-in microphone, which • Battery shall not be exposed to excessive heat such as allows you to make calls on a Bluetooth-enabled mobile phone. Make sure your Bluetooth-enabled mobile phone is paired with the • When the battery is low, the unit will beep every 20 seconds. headphones. When a call comes in to the connected mobile phone, you will hear an incoming call alert on the headphones. to work. 1. Press the FORWARD button to answer the incoming call. 2. Press the FORWARD button again to end the call. 1. Long press the POWER button to turn ON the unit. The 3. The reject the incoming call, press and hold the BACK button. BLUETOOTH LED indicator will light on. 4. To transfer the sound between the headphones and the mobile 2. Long press the POWER button again turn OFF the unit. The phone, press and hold the PLAY/PAUSE button during the call. Bluetooth pairing 1. Long press to turn ON the unit. The BLUETOOTH LED indicator will blink blue and red alternately to indicate the unit is in pairing mode. 2. On the Bluetooth device, enable Bluetooth and select “HC 2000B” from the Device List. (Refer to the user manual of your Bluetooth device for detailed operations.)

Using the AUX IN Jack IMPORTANT SAFETY INFORMATION 1. Insert one end of the audio cable into the LINE OUT or 6. Read these instructions. headphone jack on your external audio device. 7. Keep these instructions. 2. Connect the other end of the cable to the AUX IN 3.5 mm stereo 8. Heed all warnings. jack on the headphones. 9. Follow all instructions. NOTE: If the headphones are in ON mode, the headphones will 10.Do not use this apparatus near water. work as normal, wired headphones. 11. Clean only with dry cloth. 12. 3. Begin playback on the external device. The external device’s sound output will be heard through the headphones. 13.Do not expose this product to bright sunshine for a long time. 4. To adjust volume, use the volume control on the external 14.Do not disassemble or modify this product. audio device. 15.Please store this product in a clean and dry environment. 5. When done, stop playback on the external device and WARNING! To prevent possible hearing damage, do not listen at disconnect the audio cable from the AUX IN jack on high volume levels for long periods. the headphones. To prevent possible hearing damage, do not listen at high volume for long periods. Max. output voltage ≤ 150 mV wide band Troubleshooting Characteristic voltage ≥ 75 mV Rechargeable battery •Power is not on; Long press 3.7 V 185 mAh to turn ON the unit. Battery type No power lithium-polymer battery •Make sure the battery Charging power DC 5 V 300 mA is charged. > 10 hours at 60% volume •You have not activated the Operating time when fully charged Bluetooth function on your device. Refer to your device’s Charging time Appr. 3 - 4 hours The Bluetooth device user manual to activate the Bluetooth cannot pair or connect Bluetooth function. Version Version 5.0 with the headphones. •The unit is already paired Operating with another Bluetooth 2.4 to 2.48 GHz frequency device; disconnect that device RF output power 0 dBm and then try again. Up to 10 m measured in open Working distance space (wall and structures

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION SUPPLIER’S DECLARATION OF CONFORMITY (SDoC) HC 2000B Responsible Party Name: Music Tribe • Reorient or relocate the receiving antenna. Commercial NV Inc. • Increase the separation between the equipment and receiver. Address: 5270 Procyon Street • Las Vegas, NV 89118 to which the receiver is connected. USA • Consult the dealer or an experienced radio/TV technician for help. Phone Number: +1 702 800 8290 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC-ID: QWH-MTHP This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: HC 2000B (1) This device may not cause harmful interference, and This equipment has been tested and found to comply with the limits (2) This device must accept any interference received, including for a ClassB digital device, pursuant to part 15 of the FCC Rules. These interference that may cause undesired operation. limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses Caution! and can radiate radio frequency energy and, if not installed and used in The Music Tribe is not responsible for any radio or TV interference caused accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by equipment FCC RF Radiation Exposure Statement. FCC RF Radiation Exposure Statement: the interference by one or more of the following measures: (1) This Transmitter must not be co-located or operating in conjuction with any other antenna or transmitter. (2) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. LEGAL DISCLAIMER All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.


Document Created: 2019-06-28 10:30:21
Document Modified: 2019-06-28 10:30:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC