User Manual

FCC ID: QWH-MTHP-01

Users Manual

Download: PDF
FCCID_4446328

Quick Start Guide NC-6602 Wireless Active Noise-Canceling Headphones with Bluetooth* Connectivity Controls (2) (3) (4) (1) (7) (6) (5) (8) (1) ANC ON/OFF button switches the ANC (Active Noise (5) MICROPHONE can be used for talkback during phone calls. (2) FORWARD/VOLUME button can be used to increase (6) AUX IN stereo jack can be used to listen to audio from volume (short press), skip to the next song (long external devices as normal wired headphones using press), or begin/end a phone call on a Bluetooth- audio cables with 3.5 mm stereo connectors. connected mobile phone. (7) INDICATOR LED shows the charging status (3) POWER/PLAY/PAUSE button switches the (red = charging; blue = fully charged) as well as the Bluetooth status (blinking blue and red = in pairing pauses audio playback (short press). Secondary call mode; blue = connected; blinking blue = audio functions include Answer Call (press) and End Call/ playback underway). Reject Call (long press). (8) MICRO USB jack is for charging rechargeable (4) BACK/VOLUME button can be used to decrease batteries. volume (short press) or skip to the previous song (long press). A54-00002-37754

Getting started Power Supply 1. Long press the POWER/PLAY/PAUSE button to turn ON the unit. The INDICATOR LED indicator will light on. The unit is powered by a built-in, lithium-polymer rechargeable 2. Long press the POWER/PLAY/PAUSE button again turn OFF the battery. Charge the built-in battery for at least four hours before To charge the internal battery, follow these steps: Adjusting volume 1. Connect the smaller end of the supplied USB cable to the Short press the FORWARD/VOLUME and BACK/VOLUME buttons MICRO USB jack. to increase or reduce the headphone volume. When the volume reaches maximum, there is a warning tone. 2. Connect the other end to a powered USB jack on your computer or an AC power supply (not included). t 3. The INDICATOR LED indicator will change color to red during charging. 4. When fully charged, the INDICATOR LED indicator will turn blue. Low Battery Warning When the battery voltage drops below 3.0 V, there will be a 1. Adjust the headband and arm of the headphones, warning beep every 60 seconds. exposing 2 – 3 cm. 2. Place the headphones over your ears and head with the voltage drops lower then 2.9 V. headband in the middle. Warnings: 3. Tight the headband and arm until the ear cups cover your ears • While using the built-in battery, the environmental temperature ANC (Active Noise Cancellation) should be 5° C (41° F) to 35° C (95° F). The ANC (Active Noise Cancellation) function is available in both • To get the longest service life for the built-in battery, charge at wired and wireless conditions. The ANC circuit must be switched room temperature. • Attention should be drawn the environmental aspects of To switch on the ANC circuit, press and hold the ANC button for 1 battery disposal. second. The INDICATOR LED will light green. • Battery shall not be exposed to excessive heat such as sunshine, to work. Bluetooth pairing • In order to prolong the battery service life, please charge every 1. To switch on Bluetooth, press and hold the POWER/PLAY/ 6 months. PAUSE button for about 3 seconds. The INDICATOR LED • Immediately charge the battery if the headphones are left indicator will blink blue and red alternately to indicate the unit unused for a lengthy period. is in pairing mode. • The battery is original to the headphones. Please do not attempt 2. On the Bluetooth device, enable Bluetooth and select to change the battery by yourself. “NC-6602” from the Device List. (Refer to the user manual of your Bluetooth device for detailed operations.)

3. If the Bluetooth device prompts for a passcode, use “0000”. 5. When done, stop playback on the external device and 4. When pairing is successful, the INDICATOR LED will light a disconnect the audio cable from the AUX IN jack on steady blue. the headphones. Receiving a phone call PAUSE button for about 3 seconds. These headphones are equipped with a built-in microphone, which allows you to make calls on a Bluetooth-enabled mobile the connection. phone. Make sure your Bluetooth-enabled mobile phone is If the headphones have previously been paired with a Bluetooth paired with the headphones. When a call comes in to the device, the headphones will automatically connect with that connected mobile phone, you will hear an incoming call alert on device if the device is powered on and within range. If not, the the headphones. Your headphones and mobile phone should be headphones will enter standby mode, and the INDICATOR LED will within 10 m (33 ft) of each other. light a steady blue. 1. Short press the POWER/PLAY/PAUSE button to answer the NOTE: If you want to connect your headphones to another incoming call. Bluetooth audio device, you need to disconnect the current device 2. Long press the POWER/PLAY/PAUSE button to reject the call. 3. Short press the POWER/PLAY/PAUSE button again to end the call. Using a Bluetooth device To prevent possible hearing damage, do not listen at high 1. When successfully paired, sound from your Bluetooth device volume for long periods. will be audible through the headphones 2. Press the POWER/PLAY/PAUSE button to pause playback. Press Troubleshooting again to resume playback. •Power is not on; Long press 3. Short press the FORWARD/BACK buttons to adjust the to turn ON the unit. headphone volume. You can also adjust the volume directly on No power your paired Bluetooth device. •Make sure the battery is charged. 4. Long press the FORWARD/BACK buttons to select your desired •You have not activated the Bluetooth function on your NOTE: the BLUETOOTH LED indicator will blink blue device. Refer to your device’s during playback. user manual to activate the The Bluetooth device Bluetooth function. cannot pair or connect Using the AUX IN jack with the headphones. •The unit is already paired 1. Insert one end of the audio cable into the LINE OUT or with another Bluetooth headphone jack on your external audio device. device; disconnect that device and then try again. 2. Connect the other end of the cable to the AUX IN 3.5 mm stereo jack on the headphones. CAUTION: NOTE: If the headphones are in ON mode, the headphones will to avoid damage, scratches or bracket deformation when not work as normal, wired headphones. in use. 3. Begin playback on the external device. The external device’s • Please do not bend or twist the bracket to avoid deformation. sound output will be heard through the headphones. • Please do not tear out the ear cushions or allow to be removed 4. To adjust volume, use the volume control on the external by unauthorized personnel. audio device. • Do not use the headphones in dangerous areas or areas where you cannot hear the outside sound.

IMPORTANT SAFETY INFORMATION cation 4. Read these instructions. Driver unit 40 mm 5. Keep these instructions. Impedance 32 Ω 6. Heed all warnings. Driver frequency range 20 Hz to 20 kHz 7. Follow all instructions. Headset sensitivity 97 dB (±3 dB) 8. Do not use this apparatus near water. Mic sensitivity -42 dB 9. Clean only with dry cloth. ANC (Active Noise Up to 20 – 25 dB @ 100 Hz to Cancellation) 1000 kHz Rechargeable battery 11. Do not expose this product to bright sunshine for a long time. 3.7 V 300 mAh 12.Do not disassemble or modify this product. Battery type lithium-polymer battery 13.Please store this product in a clean and dry environment. Charge method Computer USB interface 14.WARNING! To prevent possible hearing damage, do not listen Charging power DC 5 V 300 mA at high volume levels for long periods. Operating time Up to 6 hours Charging time 2+ hours Standby time Up to 200 hours Bluetooth Version Version 5.0 Operating 2.4 to 2.48 GHz frequency RF output power 0 dBm Up to 10 m measured in open Working distance space (wall and structures

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION SUPPLIER’S DECLARATION OF CONFORMITY (SDoC) Responsible Party Name: Music Tribe • Reorient or relocate the receiving antenna. Commercial NV Inc. • Increase the separation between the equipment and receiver. Address: 5270 Procyon Street • Las Vegas, NV 89118 to which the receiver is connected. USA • Consult the dealer or an experienced radio/TV technician for help. Phone Number: +1 702 800 8290 This device complies with part 15 of the FCC Rules. Operation is subject FCC ID: QWH -MTHP- 01 including interference that may cause undesired operation. NC-6602 This equipment has been tested and found to comply with the limits for compliance could void the user's authority to operate the equipment. for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Caution! interference in a residential installation. This equipment generates, uses The Music Tribe is not responsible for any radio or TV interference caused and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will equipment FCC RF Radiation Exposure Statement. not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by FCC RF Radiation Exposure Statement: (1) This Transmitter must not be co-located or operating in conjuction the interference by one or more of the following measures: with any other antenna or transmitter. (2) This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.



LEGAL DISCLAIMER description, thout notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved. LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.


Document Created: 2019-08-29 11:45:15
Document Modified: 2019-08-29 11:45:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC