Test Report DCD

FCC ID: QUI-HN-MFG-C

Test Report

Download: PDF
FCCID_2508943

FCC/Industry Canada Certification Test Report For the Frederick Energy Products LLC Magnetic Field Generator with CAM FCC ID: QUI-HN-MFG-C IC: 11625A-HNMFGWCA WLL JOB# 13305-01 Rev 1 February 11, 2014 Revised January 6, 2015 Prepared for: Frederick Energy Products LLC 1769 Jeff Road Huntsville, AL 35806 Prepared By: Washington Laboratories, Ltd. 7560 Lindbergh Drive Gaithersburg, Maryland 20879 Testing Certificate AT-1448 Certificates and reports shall not be reproduced except in full, without the written permission of Washington Laboratories, Limited.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator January 2014 FCC/Industry Canada Certification Test Report for the Frederick Energy Products LLC Magnetic Field Generator With CAM FCC ID: QUI-HN-MFG-C IC: 11625A-HNMFGWCA February 11, 2014 Revised January 6, 2015 WLL JOB# 13305-01 Rev 0 Prepared by: John P. Repella Compliance Engineer Reviewed by: James Ritter EMC compliance Engineer WLL Report #13305-01 Rev 1 ii © 2015 Washington Laboratories, Ltd

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 Abstract This report has been prepared on behalf of Frederick Energy Products LLC to support the attached Application for Equipment Authorization. The test report and application are submitted for a Transmitter under Part 15.209 (10/2013) of the FCC Rules and Regulations and Industry Canada RSS-210 issue 8 (12/2010) and RSS-Gen issue 3 (12/2010). This Certification Test Report documents the test configuration and test results for the Frederick Energy Products LLC Magnetic Field Generator. Testing was performed on an Open Area Test Site (OATS) of Washington Laboratories, Ltd, 7560 Lindbergh Drive, Gaithersburg, MD 20879. Site description and site attenuation data have been placed on file with the FCC's Sampling and Measurements Branch at the FCC laboratory in Columbia, MD. The Industry Canada OATS numbers are 3035A-1 and 3035A-2 for Washington Laboratories, Ltd. Site 1 and Site 2, respectively. Washington Laboratories, Ltd. has been accepted by the FCC and approved by ACLASS under Certificate AT-1448 as an independent FCC test laboratory. The Frederick Energy Products LLC Magnetic Field Generator complies with the limits for a Transmitter device under FCC Part 15.209 and RSS210 issue 8. Revision History Description of Change Date Rev 0 Initial Release February 11, 2014 Rev 1 Revised model number to HN-MFG-C January 6, 2015 JR WLL Report #13305-01 Rev 1 iii © 2015 Washington Laboratories, Ltd

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 Table of Contents Abstract ............................................................................................................................... ii 1 Introduction ..............................................................................................................1 1.1 Compliance Statement ........................................................................................ 1 1.2 Test Scope ........................................................................................................... 1 1.3 Contract Information ........................................................................................... 1 1.4 Test Dates............................................................................................................ 1 1.5 Test and Support Personnel ................................................................................ 1 1.6 Abbreviations ...................................................................................................... 2 2 Equipment Under Test .............................................................................................3 2.1 EUT Identification & Description....................................................................... 3 2.2 Test Configuration .............................................................................................. 3 2.3 Equipment Configuration.................................................................................... 4 2.4 Support Equipment ............................................................................................. 4 2.5 Interface Cables................................................................................................... 5 2.6 EUT Modifications ............................................................................................. 5 2.7 Testing Algorithm ............................................................................................... 5 2.8 Test Location....................................................................................................... 5 2.9 Measurements ..................................................................................................... 5 2.9.1 References ....................................................................................................... 5 2.10 Measurement Uncertainty ................................................................................... 6 3 Test Equipment ........................................................................................................7 4 Test Results ..............................................................................................................8 4.1 Occupied Bandwidth: (FCC Part §2.1049, RSS –Gen sect 4.6.1) ...................... 8 4.2 Radiated Spurious Emissions: (FCC Part §15.209, RSS-Gen Table 6).............. 8 4.2.1 Test Procedure ................................................................................................ 8 4.3 Receiver Radiated Emissions (RSS-210 sect 2.5, RSS-GEN sect 6.1) ............ 12 4.3.1 Requirements ................................................................................................ 12 4.3.2 Test Procedure .............................................................................................. 12 4.3.3 Test Data ....................................................................................................... 12 4.3.4 Radiated Data Reduction and Reporting....................................................... 13 WLL Report #13305-01 Rev 1 iv © 2015 Washington Laboratories, Ltd

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 List of Tables Table 1: Device Summary................................................................................................... 3 Table 2: Equipment Configuration ..................................................................................... 4 Table 3: Support Equipment ............................................................................................... 4 Table 4: Interface Cables .................................................................................................... 5 Table 5: Expanded Uncertainty List ................................................................................... 7 Table 6: Test Equipment List .............................................................................................. 7 Table 7: Radiated Emissions Limits ................................................................................... 8 Table 8: Radiated Emissions Test Data < 30MHz ............................................................ 10 Table 9: Radiated Emissions Test Data > 30MHz (TX and RCV) ................................... 11 Table 10: Receiver Radiated Emissions Test Data > 30MHz (TX and RCV) .................. 14 List of Figures Figure 1: Test Configuration ............................................................................................... 4 WLL Report #13305-01 Rev 1 v © 2015 Washington Laboratories, Ltd

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 1 Introduction 1.1 Compliance Statement The Frederick Energy Products LLC Magnetic Field Generator w CAM complies with the limits for an Intentional Radiator device under Part 15.209 of the FCC Rules and Regulations and Industry Canada RSS-210 issue 8. 1.2 Test Scope Tests for radiated emissions were performed. All measurements were performed according to the 2003 version of ANSI C63.4. The measurement equipment conforms to ANSI C63.2 Specifications for Electromagnetic Noise and Field Strength Instrumentation. 1.3 Contract Information Customer: Frederick Energy Products LLC 1769 Jeff Drive, Huntsville, AL, 35806 Quotation Number: 67877 1.4 Test Dates Testing was performed on the following date(s): 1/27/2014 1.5 Test and Support Personnel Washington Laboratories, LTD John P. Repella Customer Representative Ed Richardson, Ishmael Chigumira WLL Report #13305-01 Rev 1 - 1 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 1.6 Abbreviations A Ampere Ac alternating current AM Amplitude Modulation Amps Amperes b/s bits per second BW Bandwidth CE Conducted Emission Cm centimeter CW Continuous Wave dB decibel Dc direct current EMI Electromagnetic Interference EUT Equipment Under Test FM Frequency Modulation G giga - prefix for 109 multiplier Hz Hertz IF Intermediate Frequency K kilo - prefix for 103 multiplier M Mega - prefix for 106 multiplier M Meter  micro - prefix for 10-6 multiplier NB Narrowband LISN Line Impedance Stabilization Network RE Radiated Emissions RF Radio Frequency Rms root-mean-square SN Serial Number S/A Spectrum Analyzer V Volt WLL Report #13305-01 Rev 1 - 2 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 2 Equipment Under Test 2.1 EUT Identification & Description The Frederick Energy product, LLC Magnetic Field Generator w CAM produces a 73 kHz proximity field (CW signal). When a Personal Alarm Device (PAD) enters this field it causes the PAD unit to visually and audibly alarm. In addition the PAD unit sends data back to the Magnetic Field Generator receiver on 916 MHz that causes the generator to visibly and audibly alarm. The Magnetic field generator is comprised of the main unit and a warning module that contains a visual and audible alarm. This device is used with the generator mounted on a vehicle while the PAD units are worn by personnel to warn both the equipment operators and people in the proximity of this equipment of possibly dangerous conditions. Table 1: Device Summary ITEM DESCRIPTION Manufacturer: Frederick Energy Products LLC FCC ID: QUI-HN-MFG-C IC: 11625A-HNMFGWCA EUT Name: Magnetic Field Generator w/ CAM Model: HN-MFG-C FCC Rule Parts: 15.209 IC Rule Part RSS210 issue 8 (RSS-Gen Issue 3) IC Emission Designator NON Frequency Range: 73kHz Occupied Bandwidth: N/A CW non modulated signal Keying: Automatic Type of Information: CW (illumination) Number of Channels: 1 Power Output Level Fixed Antenna Type Integral Magnetic Induction Interface Cables: Power, warning module cable Power Source & Voltage: Battery (12 VDC) Highest TX emission 73kHz , -8.4dB Margin Highest RX emission 78.93MHz, -1.7dB Margin 2.2 Test Configuration The Frederick Energy Products LLC Magnetic Field Generator, Equipment Under Test (EUT), was operated from 12VDC via a Lab AC/DC power supply. WLL Report #13305-01 Rev 1 - 3 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 Figure 1: Test Configuration 2.3 Equipment Configuration The EUT was set up as outlined in Figure 1. The EUT was comprised of the following equipment. (All Modules, PCBs, etc. listed were considered as part of the EUT, as tested.) Table 2: Equipment Configuration Name / Description Manufacturer Model Serial Number Revision Magnetic Field Frederick Energy Products HN-MFG-C FCC02 #25 Generator (2) Warning WMS03553 Frederick Energy Products HN-WM-LS -- Modules WMS03597 2.4 Support Equipment The following support equipment was used during testing: Table 3: Support Equipment Item Model/Part Number Serial Number PAD HN-PAD PD01163 Power Supply (Primary) 1337DC Power Supply N/A WLL Report #13305-01 Rev 1 - 4 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 2.5 Interface Cables Table 4: Interface Cables Port Connector Cable Shielded Termination Point Identification Type Length (Y/N) 2 wire to 4 Pin 12Vdc input >1 m N Power source to EUT Circular Warning Module 4 wire circular >1m N Magnetic Field Generator to Warning Module Warning Module 4 wire circular >1m N Warning Module 1 to Warning Module 2 2.6 EUT Modifications No modifications were performed in order to meet the test requirements. 2.7 Testing Algorithm The EUT operates continuously when power is applied. Worst case emission levels are provided in the test results data. PAD support unit was brought within range of the generator to activate receive warning alarms. 2.8 Test Location Testing was performed on an Open Area Test Site (OATS) of Washington Laboratories, Ltd, 7560 Lindbergh Drive, Gaithersburg, MD 20879. Site description and site attenuation data have been placed on file with the FCC's Sampling and Measurements Branch at the FCC laboratory in Columbia, MD. The Industry Canada OATS numbers are 3035A-1 and 3035A-2 for Washington Laboratories, Ltd. Site 1 and Site 2, respectively. Washington Laboratories, Ltd. has been accepted by the FCC and approved by ACLASS under Certificate AT-1448 as an independent FCC test laboratory. 2.9 Measurements 2.9.1 References ANSI C63.2 Specifications for Electromagnetic Noise and Field Strength Instrumentation ANSI C63.4 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz WLL Report #13305-01 Rev 1 - 5 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 2.10 Measurement Uncertainty All results reported herein relate only to the equipment tested. The basis for uncertainty calculation uses ANSI/NCSL Z540-2-1997 with a type B evaluation of the standard uncertainty. Elements contributing to the standard uncertainty are combined using the method described in Equation 1 to arrive at the total standard uncertainty. The standard uncertainty is multiplied by the coverage factor to determine the expanded uncertainty which is generally accepted for use in commercial, industrial, and regulatory applications and when health and safety are concerned (see Equation 2). A coverage factor was selected to yield a 95% confidence in the uncertainty estimation. Equation 1: Standard Uncertainty a2 b2 c2 uc   2  2  2  ....... diva divb divc Where uc = standard uncertainty a, b, c,.. = individual uncertainty elements Diva, b, c = the individual uncertainty element divisor based on the probability distribution Divisor = 1.732 for rectangular distribution Divisor = 2 for normal distribution Divisor = 1.414 for trapezoid distribution Equation 2: Expanded Uncertainty U  kuc Where U = expanded uncertainty k = coverage factor k ≤ 2 for 95% coverage (ANSI/NCSL Z540-2 Annex G) uc = standard uncertainty WLL Report #13305-01 Rev 1 - 6 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 The measurement uncertainty complies with the maximum allowed uncertainty from CISPR 16-4-2. Measurement uncertainty is not used to adjust the measurements to determine compliance. The expanded uncertainty values for the various scopes in the WLL accreditation are provided in Table 5 below. Table 5: Expanded Uncertainty List Expanded Scope Standard(s) Uncertainty Conducted Emissions CISPR11, CISPR22, CISPR14, FCC Part 15 +2.63 dB Radiated Emissions CISPR11, CISPR22, CISPR14, FCC Part 15 +4.55 dB . 3 Test Equipment Table 6 shows a list of the test equipment used for measurements along with the calibration information. Table 6: Test Equipment List Test Name: Radiated Emissions Test Date: 01/27/2014 Asset # Manufacturer/Model Description Cal. Due 68 HP - 85650A ADAPTER QP 1/9/2015 70 HP - 85685A PRESELECTOR RF W/OPT 8ZE 1/9/2015 72 HP - 8568B ANALYZER SPECTRUM 1/9/2015 644 SUNOL SCIENCES CORPORATION - ANTENNA BICONLOG 1/17/2016 JB1 4 ARA - DRG-118/A ANTENNA DRG 1-18GHZ 2/20/2015 66 B&Z - BZ-01002650-401545-282525 PRE-AMPLIFIER RF. 1-26.5GHZ 10/2/2014 31 EMCO 6502 ACTIVE LOOP 2/23/14 WLL Report #13305-01 Rev 1 - 7 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 4 Test Results 4.1 Occupied Bandwidth: (FCC Part §2.1049, RSS –Gen sect 4.6.1) Occupied bandwidth was performed by setting the EUT near the loop antenna to allow for sufficient pickup of the signal. The transmit signal is a 73 kHz non-modulated CW signal; therefore there is no measurable bandwidth. 4.2 Radiated Spurious Emissions: (FCC Part §15.209, RSS-Gen Table 6) Transmitters operating under §15.209 & Industry Canada RSS 210 (RSS-GEN) must comply with the radiated emissions listed in the following table: Table 7: Radiated Emissions Limits Frequency Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 - 0.490 2400/F(kHz) 300 0.490 - 1.705 24000/F(kHz) 30 1.705 - 30.0 30 30 30 - 88 100 3 88 - 216 150 3 216 - 960 200 3 Above 960 500 3 4.2.1 Test Procedure The EUT was placed on motorized turntable for radiated testing on a 30-meter open field test site. The emissions from the EUT were measured continuously at every azimuth by rotating the turntable For frequencies between 10 kHz and 30 MHz, a loop antenna was mounted of a tripod at height of 1 m. The Loop antenna was rotated about its vertical and horizontal axis to determine the highest emissions. For frequencies above 30MHz the receiving antennas were mounted on an antenna mast to determine the height of maximum emissions. The height of the antenna was varied between 1 and 4 meters. Both the horizontal and vertical field components were measured. WLL Report #13305-01 Rev 1 - 8 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 Measurements of frequencies above 30MHz were made at a distance of 3m. The EUT was scanned from 10k to 3GHz (in order to include the receiver data). The limit at 300m has been interpolated to 30m. The roll-off was determined as specified in FCC part 15.31 (f)(2) two measurements were made at two distances, 3m and 30m. The level of the fundamental frequency at 3m was measured as 120.8dBuV/m The level of the fundamental frequency at 30m was measured as 69.8dBuV/m The difference between the two readings is 51.0dB therefore the roll-off is 51.0dB/decade. This offset was added to the 300m limit to adjust the limit to 30m: Example @ 73 kHz: 300m limit = 2400/73 = 32.8767uV/m = 20*Log (32.8767) = 30.3377dBuV/m 30m limit = 30.3377dBuV/m +51.0dB = 81.3dBuV/m = 10^ (81.3377/20) = 11665.1uV/m The EUT was examined in three orthogonals and the orthogonal the demonstrated the highest emission was reported. All Fundamental and Harmonics were tested for peak emissions and compared to the Average limits as this is a CW signal. As the CW complies with the average limits it also complies with the peak limits of part 15.35. All other spurious signals were tested using average or quasi-peak detectors as specified. In accordance with FCC part15.209 (d) emissions in the bands 9-90 kHz and 110-490 kHz are performed using an average detector. All other readings below 1000MHz were taken with a quasi-peak detector. Resolution bandwidths used for frequencies measured between:  9 kHz – 150kHz, RBW = 200Hz  150kHz – 30MHz, RBW = 9kHz  30MHz – 1GHz, RBW = 120kHz And, for frequencies measured above 1GHz:  RBW = 1MHz WLL Report #13305-01 Rev 1 - 9 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 Table 8: Radiated Emissions Test Data < 30MHz Corr Corr. Corr. Frequency Polarity Azimuth Ant. SA Level Limit Margin Factors Level Level Comments (MHz) H/V (Degree) Height (m) (dBuV) (uV/m) (dB) (dB) (uV/m) (dBuV/m) 0.073 X 90.00 1.00 59.35 11.8 3628.2 71.2 11665.10 -10.1 Peak 0.073 Y 45.00 1.00 61.12 11.8 4448.3 73.0 11665.10 -8.4 Peak 0.073 Z 270.00 1.00 55.16 11.8 2239.7 67.0 11665.10 -14.3 0.146 X 45.00 1.00 42.54 11.5 501.2 54.0 5832.55 -21.3 Peak 0.146 Y 90.00 1.00 47.25 11.5 862.0 58.7 5832.55 -16.6 0.146 Z 45.00 1.00 46.86 11.5 824.2 58.3 5832.55 -17.0 0.219 X 45.00 1.00 41.50 11.4 440.8 52.9 3888.37 -18.9 Peak 0.219 Y 270.00 1.00 45.86 11.4 728.1 57.2 3888.37 -14.6 0.219 Z 190.00 1.00 42.25 11.4 480.5 53.6 3888.37 -18.2 0.292 X 90.00 1.00 38.35 11.3 305.1 49.7 2916.27 -19.6 Peak 0.292 Y 90.00 1.00 42.20 11.3 475.3 53.5 2916.27 -15.8 0.292 Z 45.00 1.00 40.40 11.3 386.3 51.7 2916.27 -17.6 Restricted band 0.110 X 90.00 1.00 41.40 11.5 442.4 52.9 7741.38 -24.9 edge 0.110 Y 90.00 1.00 42.10 11.5 479.5 53.6 7741.38 -24.2 0.110 Z 45.00 1.00 41.62 11.5 453.8 53.1 7741.38 -24.6 No other harmonic or spurious emissions were detectable below 30MHz Note: Since the peak readings are below the applicable 15.209 average limits and the transmit occupied bandwidth is non-existent the peak measurements do not exceed the part 15.35 limit (average limit plus 20dB). Therefore the unit was not tested using an average detector in these (*) ranges and is assumed to comply with the peak and average requirements. WLL Report #13305-01 Rev 1 - 10 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 Table 9: Radiated Emissions Test Data > 30MHz (TX and RCV) Corr Corr. Frequency Polarity Azimuth Ant. SA Level Limit Margin Factors Level Comments (MHz) H/V (Degree) Height (m) (dBuV) (uV/m) (dB) (dB) (uV/m) 44.55 V 190.00 1.45 25.13 13.0 81.0 100.0 -1.8 qp 50.93 V 90.00 1.00 26.30 9.9 64.7 100.0 -3.8 qp 57.09 V 290.00 1.65 20.30 9.4 30.6 100.0 -10.3 qp 65.35 V 180.00 1.21 24.50 10.5 55.9 100.0 -5.0 qp 78.93 V 190.00 1.45 26.15 10.8 70.0 100.0 -3.1 qp 108.73 V 270.00 1.70 12.54 15.4 25.0 150.0 -15.6 qp 129.53 V 190.00 1.85 20.41 17.3 77.2 150.0 -5.8 qp 148.80 V 180.00 1.54 20.46 15.9 65.6 150.0 -7.2 qp 163.60 V 170.00 1.26 22.71 15.8 84.4 150.0 -5.0 qp 183.15 V 180.00 1.84 20.17 15.3 59.1 150.0 -8.1 qp 208.75 V 180.00 2.18 16.51 15.0 37.5 150.0 -12.0 qp 224.78 V 0.00 1.80 15.85 15.4 36.5 200.0 -14.8 qp 258.20 V 180.00 1.50 18.90 16.8 61.2 200.0 -10.3 qp 337.33 V 180.00 1.50 23.78 19.5 146.7 200.0 -2.7 qp 461.28 V 190.00 1.99 10.18 23.6 48.7 200.0 -12.3 qp 520.73 V 150.00 2.20 13.25 25.4 85.1 200.0 -7.4 qp 44.55 H 270.00 4.00 22.50 13.0 59.9 100.0 -4.5 qp 50.93 H 280.00 3.86 25.60 9.9 59.7 100.0 -4.5 qp 57.09 H 270.00 3.90 22.40 9.4 38.9 100.0 -8.2 qp 65.35 H 180.00 3.59 27.30 10.5 77.2 100.0 -2.2 qp 78.93 H 180.00 3.50 27.50 10.8 81.8 100.0 -1.7 qp 108.73 H 190.00 3.60 16.65 15.4 40.1 150.0 -11.5 qp 129.53 H 90.00 2.60 15.11 17.3 41.9 150.0 -11.1 qp 148.80 H 180.00 2.76 18.53 15.9 52.5 150.0 -9.1 qp 163.60 H 190.00 3.00 14.92 15.8 34.4 150.0 -12.8 qp 183.15 H 90.00 2.00 16.24 15.3 37.6 150.0 -12.0 qp 208.75 H 90.00 1.87 20.20 15.0 57.4 150.0 -8.4 qp 224.78 H 90.00 1.62 13.73 15.4 28.6 200.0 -16.9 qp 258.20 H 180.00 1.50 20.50 16.8 73.6 200.0 -8.7 qp 337.33 H 180.00 1.50 15.60 19.5 57.2 200.0 -10.9 qp 461.28 H 180.00 1.93 13.80 23.6 73.9 200.0 -8.6 qp 520.73 H 0.00 0.00 9.75 25.4 56.9 200.0 -10.9 qp qp indicates the use of the Quasi-peak detector. If not indicated peak detector was used. WLL Report #13305-01 Rev 1 - 11 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 4.3 Receiver Radiated Emissions (RSS-210 sect 2.5, RSS-GEN sect 6.1) 4.3.1 Requirements Test Arrangement: Table Top Compliance Standard: RSS-Gen sect 6.1 RSS-Gen Compliance Limits for Receivers Frequency Limits 30-88 MHz 100 µV/m 88-216 MHz 150 µV/m 216-960 MHz 200 µV/m >960MHz 500 µV/m 4.3.2 Test Procedure The requirements of RSS-GEN call for the EUT to be placed on an 80 cm high 1 X 1.5 meters non-conductive motorized turntable for radiated testing on a 3-meter open field test site. The emissions from the EUT were measured continuously at every azimuth by rotating the turntable. Bi-conical and log periodic broadband antennas were mounted on an antenna mast to determine the height of maximum emissions. The height of the antenna was varied between 1 and 4 meters. The output of the antenna was connected to the input of the spectrum analyzer and the emissions in the frequency range of 30 MHz to 3 GHz were measured. Cables were varied in position to produce maximum emissions. Both the horizontal and vertical field components were measured. The output from the antenna was connected, via a preamplifier, to the input of the spectrum analyzer. The detector function was set to quasi-peak, peak, or average as appropriate. The measurement bandwidth of the spectrum analyzer system was set to at least 120 kHz, with all post-detector filtering no less than 10 times the measurement bandwidth. All measurements above 1GHz were made at a distance of 3m with a Resolution Bandwidth of 1MHz and a Video bandwidth of 10Hz. Average readings were taken in a linear mode with zero-span. 4.3.3 Test Data The EUT complies with the requirements of RSS 210 (RSS-GEN limits) as shown in Table 10. WLL Report #13305-01 Rev 1 - 12 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 4.3.4 Radiated Data Reduction and Reporting To convert the raw spectrum analyzer radiated data into a form that can be compared with the FCC limits, it is necessary to account for various calibration factors that are supplied with the antennas and other measurement accessories. These factors are included into the antenna factor (AF) column of the table and in the cable factor (CF) column of the table. The AF (in dB/m) and the CF (in dB) is algebraically added to the raw Spectrum Analyzer Voltage in dBµV to obtain the Radiated Electric Field in dBµV/m. This logarithm amplitude is converted to linear amplitude, and then compared to the Industry Canada limit. Example: Spectrum Analyzer Voltage: VdBµV Antenna Correction Factor: AFdB/m Cable Correction Factor: CFdB Electric Field: EdBV/m = V dBµV + AFdB/m + CFdB To convert to linear units of measure: EdBV/m/20 Inv log WLL Report #13305-01 Rev 1 - 13 of 14- © 2015 Washington Laboratories, Ltd.

Frederick Energy Products LLC FCC/IC Certification Test Report Magnetic Field Generator w CAM February , 2014 Table 10: Receiver Radiated Emissions Test Data > 30MHz (TX and RCV) Corr Corr. Frequency Polarity Azimuth Ant. SA Level Limit Margin Factors Level Comments (MHz) H/V (Degree) Height (m) (dBuV) (uV/m) (dB) (dB) (uV/m) 44.55 V 190.00 1.45 25.13 13.0 81.0 100.0 -1.8 qp 50.93 V 90.00 1.00 26.30 9.9 64.7 100.0 -3.8 qp 57.09 V 290.00 1.65 20.30 9.4 30.6 100.0 -10.3 qp 65.35 V 180.00 1.21 24.50 10.5 55.9 100.0 -5.0 qp 78.93 V 190.00 1.45 26.15 10.8 70.0 100.0 -3.1 qp 108.73 V 270.00 1.70 12.54 15.4 25.0 150.0 -15.6 qp 129.53 V 190.00 1.85 20.41 17.3 77.2 150.0 -5.8 qp 148.80 V 180.00 1.54 20.46 15.9 65.6 150.0 -7.2 qp 163.60 V 170.00 1.26 22.71 15.8 84.4 150.0 -5.0 qp 183.15 V 180.00 1.84 20.17 15.3 59.1 150.0 -8.1 qp 208.75 V 180.00 2.18 16.51 15.0 37.5 150.0 -12.0 qp 224.78 V 0.00 1.80 15.85 15.4 36.5 200.0 -14.8 qp 258.20 V 180.00 1.50 18.90 16.8 61.2 200.0 -10.3 qp 337.33 V 180.00 1.50 23.78 19.5 146.7 200.0 -2.7 qp 461.28 V 190.00 1.99 10.18 23.6 48.7 200.0 -12.3 qp 520.73 V 150.00 2.20 13.25 25.4 85.1 200.0 -7.4 qp 44.55 H 270.00 4.00 22.50 13.0 59.9 100.0 -4.5 qp 50.93 H 280.00 3.86 25.60 9.9 59.7 100.0 -4.5 qp 57.09 H 270.00 3.90 22.40 9.4 38.9 100.0 -8.2 qp 65.35 H 180.00 3.59 27.30 10.5 77.2 100.0 -2.2 qp 78.93 H 180.00 3.50 27.50 10.8 81.8 100.0 -1.7 qp 108.73 H 190.00 3.60 16.65 15.4 40.1 150.0 -11.5 qp 129.53 H 90.00 2.60 15.11 17.3 41.9 150.0 -11.1 qp 148.80 H 180.00 2.76 18.53 15.9 52.5 150.0 -9.1 qp 163.60 H 190.00 3.00 14.92 15.8 34.4 150.0 -12.8 qp 183.15 H 90.00 2.00 16.24 15.3 37.6 150.0 -12.0 qp 208.75 H 90.00 1.87 20.20 15.0 57.4 150.0 -8.4 qp 224.78 H 90.00 1.62 13.73 15.4 28.6 200.0 -16.9 qp 258.20 H 180.00 1.50 20.50 16.8 73.6 200.0 -8.7 qp 337.33 H 180.00 1.50 15.60 19.5 57.2 200.0 -10.9 qp 461.28 H 180.00 1.93 13.80 23.6 73.9 200.0 -8.6 qp 520.73 H 0.00 0.00 9.75 25.4 56.9 200.0 -10.9 qp qp indicates the use of the Quasi-peak detector. If not indicated peak detector was used. WLL Report #13305-01 Rev 1 - 14 of 14- © 2015 Washington Laboratories, Ltd.


Document Created: 2015-01-19 23:39:25
Document Modified: 2015-01-19 23:39:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC