RF Report

FCC ID: QTG-EXCHANGE

RF Exposure Info

Download: PDF
FCCID_2459679

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM141000571302 Fax: +86 (0) 755 2671 0594 Page: 1 of 6 Email: ee.shenzhen@sgs.com 1 Cover page SAR Evaluation Report Application No.: SZEM1410005713RF Applicant: ZAGG INC Manufacturer: ZAGG INC Factory: Interface Tech Co.,Ltd Product Name: Exchange Bluetooth Speaker Model No.(EUT): ZGEXSP-BS0 Trade Mark: ZAGG FCC ID: QTG-EXCHANGE Standards: 47 CFR Part 1.1307(2013) 47 CFR Part 2.1093 (2013) KDB447498D01 General RF Exposure Guidance v05 Date of Receipt: 2014-10-21 Date of Test: 2014-10-23 to 2014-11-06 Date of Issue: 2014-11-11 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141000571302 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-11-11 Original Authorized for issue by: Tested By 2014-11-06 (Jim Huang) /Project Engineer Date Prepared By 2014-11-11 (Link Liang) /Clerk Date Checked By 2014-11-13 (Emen Li) /Reviewer Date “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141000571302 Page: 3 of 6 3 Contents Page 1 COVER PAGE .............................................................................................................................................................1 2 VERSION .....................................................................................................................................................................2 3 CONTENTS .................................................................................................................................................................3 4 GENERAL INFORMATION .......................................................................................................................................4 4.1 CLIENT INFORMATION................................................................................................................................................4 4.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................4 4.3 TEST LOCATION .........................................................................................................................................................4 4.4 TEST FACILITY ...........................................................................................................................................................5 4.5 DEVIATION FROM STANDARDS...................................................................................................................................5 4.6 ABNORMALITIES FROM STANDARD CONDITIONS .......................................................................................................5 4.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................................5 5 SAR EVALUATION ....................................................................................................................................................6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................6 5.1.1 Standard Requirement .................................................................................................................................6 5.1.2 Limits ..............................................................................................................................................................6 5.1.3 EUT RF Exposure.........................................................................................................................................6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141000571302 Page: 4 of 6 4 General Information 4.1 Client Information Applicant: ZAGG INC Address of Applicant: 3855 South 500 West, Suite Q • Salt Lake City, UT 84115 Manufacturer: ZAGG INC Address of Manufacturer: 3855 South 500 West, Suite Q • Salt Lake City, UT 84115 Factory: Interface Tech Co.,Ltd Address of Factory: Room 3008, Zian Business Building, Xin'an 2nd Road, Baoan District, Shenzhen City, China 4.2 General Description of EUT Product Name: Exchange Bluetooth Speaker Model No.: ZGEXSP-BS0 Trade Mark: ZAGG Operation Frequency: 2402MHz~2480MHz Bluetooth Version: 2.1+EDR Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, π/4DQPSK, 8DPSK Number of Channel: 79 Hopping Channel Type: Adaptive Frequency Hopping systems Test Software of EUT: RDA_BT_Tester (manufacturer declare ) Sample Type: Portable production Antenna Type Integral Antenna Gain 1.6dBi Power Supply: USB charge by Adapter Battery: DC 3.7V (Li-ion Rechargeable Battery) Test Voltage: AC 120V 60Hz DC 3.7V battery fully charged USB charging cable: 80cm(Unshield) 4.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch E&E Lab No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141000571302 Page: 5 of 6 4.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • VCCI The 3m Semi-anechoic chamber, Full-anechoic Chamber and Shielded Room (7.5m x 4.0m x 3.0m) of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: R-2197, G-416, T-1153 and C-2383 respectively. • FCC – Registration No.: 556682 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 556682. • Industry Canada (IC) Two 3m Semi-anechoic chambers of SGS-CSTC Standards Technical Services Co., Ltd. have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1 & 4620C-2. 4.5 Deviation from Standards None. 4.6 Abnormalities from Standard Conditions None. 4.7 Other Information Requested by the Customer None. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS—CSTC Standards Technical Services Co., Ltd. Report No.: SZEM14100057 1302 Page: sof6 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.11 Standard Requirement Accarding to KDBAE7422001 General RF Exposire Guidance w5 421. Stendalone SA test exclusion consideratons Unless specticaly required bythe publhed RF expocure KOBprocedures, sandalone 1—9 head orbody and 10.3 extremiy SAR avaluation for generalpopulaton exposure conditons, by messurement o numercalsimulation, is not required when the corresponding SA Exclusion Threshold condion,isted belon,is satitfed 5.1.2Limits The 1—4 and 10.4 SAR test exchision hresholdsfor 100 MHe to 6 GH attet separation distances £30 mm are determined by I(max. powero chamnel,including tune—uptoerance, mW (min.test separation ditance,mm}]® [M(GHte) # 3. for 1—4 SAR and s 7.5for 10. extrerity SAwhere 1(GHzis the RF channeltransmt requncy in GHtz Power and dtance are rounded to the nearest mW and mm before calclaton"" The resut s rounded o one decimal placefor comparion Thetest exclusions are appliable on when the mitimum test separation ditance is 5 50 mm and for transmissionfrequencios between 100 MHz and & GHz. Whan the minimum tost separation distance is <5 mm, detance of 5 mm is appled to determine SAR test exclsion 5.1.3EUT RF Exposure The Max Conducted Posk Output Power is 2.41dBm in lowest channel(2402GHz: The best case gain ofthe antennais 1.6d81 EIAP= 2cttdBm + 1.608)= 4.01dBm 4.01dBm logarihmicterms convert to numerk resultis neary 25177mW Accordingto theformula ealculate the EIRP tst result {{max. power o channel.including tune—up toerance, mW (min.test separation ditance,mm}]+ IMGHz) General RF Exposure = 2.5177mW / 5 mm ) x t2402GH = 1.2005 @ SAR requirement s—s0 @: ®«@ So the SAR repor is not required ATi douunert i hnin 5y h Conpanymb to n GereatContirs t Sevcepined crnint mnatie on eoie o necenite n sniece ant cudtninnite ane it mervene owduvnnris mpet Trime ane cotbrn e Enccane xoi m To micatt Adue in Ahric n Armet e in ail inemfoma onmmteran haoe deinden hy MuWe cinR un infmmen mm hreanrefecn ie Conparya rfom inoi n t it the fo Gteris mnitors i any ThConpany‘a wwasemaey i ts t tand ts dn ton n en ron t n Ermactol fer vencary ttit sinpras ie e CamactondocimeThdcunert itb epeccnd en n it Milet stten moof e Consy minuetend mmor qy o infennr t ie on cor merenico io in Wt wrduterors m es s un n h ie Inve arerma n re encfi e epat eon n the ninsitw aric mnity e csw tSoarsony®


Document Created: 2014-11-14 02:41:53
Document Modified: 2014-11-14 02:41:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC