User Manual

FCC ID: QSRPT-35

Users Manual

Download: PDF
FCCID_4352280

W-03 THECONFERENCEUHF

1.FOREWORD.................................................................................2 2.INTRODUCTION...........................................................................2 3.SYSTEM FEATURES.....................................................................2 4.SYSTEM TYPE..............................................................................2 5.EIGHT CHANNEL RECEIVER FEATURES.........................................3 6.TRANSMITTER FUNCTION & FEATURES........................................4 7.TRANSMITTER BATTERY INSTALLATION........................................5 8. TRANSMITTER CONNECTION.......................................................6 9.OPERATING INSTRUCTIONS.........................................................7 TheVocalArtist-UHF,ThePresenter-UHF, TheHeadset-UHF,TheGuitarist-UHFandTheConference-UHF. 10.SYSTEM CONNECTIONS.............................................................8 11.TROUBLE SHOOTING...................................................................9 16 12.OPTIONAL ACCESSORIES...........................................................9 13.SPECIFICATIONS......................................................................10 5 2. Wireless hand-held or body-pack microphone or conferencemicrophone....... 8 16 TheConference-UHFisaconferencingsystemthatdesignedforsharing informationanddecisionsmadeinconferencesandmeetings. 1 2

EIGHT CHANNEL RECEIVER FEATURES 1. Grille: Protects the cartridge and help 1 reducing the breath sounds and wind noise. 2 8 3 4 2. LCD Information Display: Show the 5 transmitter frequency channel ect. 3.Down Function Button: Sets channel data. 6 7 6 7 6 7 6 7 4.Up Function Button: Sets channel data. CH5 CH6 CH7 CH8 6 5.Power and Audio Mute Switch. UHF PLL 6.Battery Cover: Open it to install the battery. CH1 CH2 CH3 CH4 EIGHT CHANNEL PROFESSIONAL WIRELESSRECEIVER 1 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 1. Power and Audio Mute Switch. 2. Antenna: Transmit the RF signal of Front Panel transmitter. 4 1 5 2 3. Belt Clip: Attach the transmitter to the belt. 4. Audio Input Jack: it is suitable for UHF BALANCED OUTPUTS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN BALANCED OUTPUTS Tested to Comply With FCC Standards FOR HOME OR OFFICE USE lavalier system/headset system. 3 6 MIX OUT 5. Low Battery Indicator: Red light glows B ANTENNA CH - 8 CH - 7 CH - 6 CH - 5 CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 A ANTENNA when it is lack of power and should renew the battery. 8 9 10 10 10 10 11 11 10 10 10 10 12 8 6. LCD Information Display: Show the 7 8 9 10 transmitter frequency channel ect. Rear Panel 7. Gain Adjusting Volume: Adjust the transmitter audio input gain. 1.Power Button: Power ON/OFF the receiver. 8.State Setting Switch: Set the using state of lavalier system(L)/headset 2.Down Function Button: Sets channel data. system(H)/guitar system(G) 3."RF" signal Indicator:It glows when the Receiver receive RF signal from 9.Up Function Button: Sets channel data. Transmitter. 10.Down Function Button: Sets channel data. 4.LCD Information Display: Show the receiver frequency channel ect. 5.Volume Knob: Adjust the volume output of receiver. CONFERENCE MICROPHONE FEATURES 6.Up Function Button: Sets channel data. 1. LCD Information Display: Show the 7."AF"Audio Level Indicator: Indicate the wireless system audio signal level. transmitter frequency channel etc. 8.Antenna. 2. Up Function Button: Sets channel data. 9.Power switch of CH5-8: 1 3. Power and Audio Mute Switch. When switch to "ON" position, it means CH5 to CH8 is on, all channcels from 1 to 8 is on for working. 4. Down Function Button: Sets channel When switch to "OFF" position, it means CH5 to CH8 is off, only CH1 to CH4 data. is on for working. 5. Volume Knob: Adjust the volume output 2 3 4 10.XLR Balanced Output Jack: Connect the audio cable from this jack to 6 of transmitter. the input port of amplifier, mixer. 6. Battery Cover: Open it to install the 11.1/4" Audio Output Jack: Connect the audio cable from this jack to the battery. input port of amplifier, mixer.(CH1-4 or CH5-8) 12. Power Jack: Connect the AC/DC adapter to receiver. 3 5 4

TRANSMITTER BATTERY INSTALLATION BODYPACK TRANSMITTER CONNECTION 1. Lavalier Microphone Connection: Connect the connecter of supplied 1. Battery Installation of Handheld Microphone: Open the battery cover, lavalier microphone to the connecting jack of transmitter (shown as below) Insert the supplied batteries into battery jar in polarity and cover the battery Set the transmitter work state in wireless lavalier system(L). 2. Headset Microphone Connection: Connect the connecter of supplied headset microphone to the connecting jack of transmitter(shown as below) Set the transmitter work state in wireless headset system(H). Rotate counterclockwise 3.Guitar Cable Connection: Connect the connecter of supplied guitar cable to open. to the connecting jack of transmitter and the other connecter to guitar(shown as below), set the transmitter work state in wireless guitar system(G). 2. Battery Installation of Bodypack Transmitter or Conference Microphone: Push open the battery cover, Insert the supplied batteries into battery jar in polarity and close the battery cover. CONFERENCE MICROPHONE CONNECTION 1.Insertthemicrophoneunitintotheconnection holeoftheconferencingunitandtighten clockwise. 2.LongpressthePOWERbuttontoturnonthe conferencemicrophone,andthe lightof Push down microphonewillbeilluminated. to open. 3.Select the appropriate channel with the UP button Push down to open. and the DOWN button 4.Short press POWER button to switch mute state (The light of microphone is off) and normal state. 5 6

OPERATING INSTRUCTIONS SYSTEM CONNECTION 1. Receiver Operation 1. Receiver Power Connection: Connect the DC connector of supplied AC/DC Power on receiver, press two "UP" buttons of module 2 and 3 together for adapter into the DC power input of receiver. Plug the AC input connecter into an 1 second to enter the adjustment, when the LCD displays "UnLOC", it is AC120/60Hz or AC220V/50Hz outlet. (Shown as below) under "Normal Operation". When the LCD displays "LOC", it is under "Locking Operation". a. Normal Operation CAUTION UHF Tested to Comply -Press and hold "UP"/"DOWN" button, release the button once the CH RISK OF ELECTRIC SHOCK With FCC Standards DO NOT OPEN FOR HOME OR OFFICE USE BALANCED OUTPUTS BALANCED OUTPUTS MIX OUT number begins to flash -When it is flashing, continue to press "UP"/"DOWN" button to increase B A CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 ANTENNA CH - 8 CH - 7 CH - 6 CH - 5 ANTENNA /decrease the channel orderly, select the desired channel -The selected channel will be save automatically without any action for 5 seconds. -Please refer to the following list for showing the adjusting channels. 2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown b. Locking Operation as below) -Press and hold "UP"/"DOWN" button, release the button once the CH number begins to flash -When it is flashing, continue to press "UP"/"DOWN"button to increase /decrease the channel orderly, select the desired channel -Once finish the channel adjustment of any one module, the channels of other seven modules will be changed automatically without any action to select the channels under same group. UHF BALANCED OUTPUTS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN BALANCED OUTPUTS Tested to Comply With FCC Standards FOR HOME OR OFFICE USE 45 -The channels will be save automatically for using without any action for MIX OUT 5 seconds. B ANTENNA CH - 8 CH - 7 CH - 6 CH - 5 CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 A ANTENNA -Please refer to the following list for showing group information. 2. Transmitter Operation Power on transmitter -Press and hold "UP"/"DOWN" button, release the button once the CH 3. Audio Connection: Connect the corresponding output of receiver by supplied number begins to flash 1/4" phone jack audio cable or your XLR cable to the input of power amplifier, -When it is flashing, continue to press "UP"/"DOWN" button to increase mixer. /decrease channel orderly, select the same channel as chosen on receiver. UHF CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Tested to Comply With FCC Standards -The selected channel will be save automatically for using without any FOR HOME OR OFFICE USE BALANCED OUTPUTS BALANCED OUTPUTS MIX OUT action for 5 seconds. B ANTENNA CH - 8 CH - 7 CH - 6 CH - 5 CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 A ANTENNA 3. Please pay attention: If hope to use multi-microphones together with better effect (less interference), we suggest to choose 8 frequencies under same group for using. 7 8

13-15 1000mA 394MM X 205MM X 52MM X2 7 238MM X 50MM X 50MM 250MM X 51MM X 51MM X2 7 460 970 100MM X 65MM X 30MM 50 164 8 CONFERENCE MICROPHONE SPECIFICATIONS X2 7 174MM X113MM X 48.5MM(Φ19.5*410MM) 9 10

FCC warning statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device operates on a no‐protection, no‐interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC‐2‐1‐28, Voluntary Licensing of License‐Exempt Low‐Power Radio Apparatus in the TV Bands.


Document Created: 2019-07-05 10:34:06
Document Modified: 2019-07-05 10:34:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC