User Manual

FCC ID: QSRHT-50C

Users Manual

Download: PDF
FCCID_4350658

WR-14

1.FOREWORD.................................................................................2 2.SYSTEM FEATURES.....................................................................2 3.SYSTEM TYPE..............................................................................2 4.SINGLE CHANNEL RECEIVER FEATURES......................................3 5.DUAL CHANNEL RECEIVER FEATURES..........................................4 6.TRANSMITTER FUNCTION & FEATURES........................................5 7.SYSTEM CONNECTIONS...............................................................6 8.BODYPACK TRANSMITTER CONNECTION......................................7 9.TRANSMITTER BATTERY INSTALLATION........................................7 10.SPECIFICATIONS.....................................................................8-9 5 1 2

8 8 5 6 2 6 7 6 2 ANT.A ANT.B ANT.A ANT.B 10 11 9 12 10 4 7 3 1 10 11 9 12 5 4 3 4 5 1 1.Power Switch: Power ON/OFF the receiver. 1.Power Switch: Power ON/OFF the receiver. 2.Power Indicator: Indicate the power ON/OFF. 2.Power Indicator: Indicate the power ON/OFF. 3. LCD Information Display: Show the receiver frequency channel ect. 3. LCD Information Display: Show the receiver frequency channel ect. 4.Down Function Button: Sets channel data. 4.Down Function Button: Sets channel data. 5.Up Function Button: Sets channel data. 5.Up Function Button: Sets channel data. 6."AF"Audio Level Indicator: Indicate the wireless system audio signal level. 6."AF"Audio Level Indicator: Indicate the wireless system audio signal level. 7."RF" signal Indicator:It glows when the Receiver receive RF signal from 7."RF" signal Indicator:It glows when the Receiver receive RF signal from Transmitter. Transmitter. 8.Antenna. 8.Antenna. 9.XLR Balanced Output Jack: Connect the audio cable from this jack to 9.XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer. the input port of amplifier, mixer. 10.Volume Knob: Adjust the volume output of receiver. 10.Volume Knob: Adjust the volume output of receiver. 11.1/4" Audio Output Jack: Connect the audio cable from this jack to the 11.1/4" Audio Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer. input port of amplifier, mixer. 12. Power Jack: Connect the AC/DC adapter to receiver. 12. Power Jack: Connect the AC/DC adapter to receiver. 3 4

1. Power and Audio Mute Switch. 2. Antenna: Transmit the RF signal of transmitter. 3. Belt Clip: Attach the transmitter to the belt. 4. Audio Input Jack: it is suitable for lavalier system/headset system. 1 1 5. Low Battery Indicator: Red light glows when it is lack of power and should renew the battery. 6. LCD Information Display: Show the transmitter frequency channel ect. 2 7. Gain Adjusting Volume: Adjust the transmitter audio input gain. 3 4 2 OFF 8.State Setting Switch: Set the using state of lavalier system(L)/headset 5 ON 3 4 system(H). 5 9.Up Function Button: Sets channel data. ON 10.Down Function Button: Sets channel data. 6 6 1. Grille: Protects the cartridge and help reducing the breath sounds and wind noise. 2. LCD Information Display: Show the transmitter frequency channel ect. 3.Down Function Button: Sets channel data. 2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown 4.Up Function Button: Sets channel data. as below) 5.Power and Audio Mute Switch. 6.Battery Cover: Open it to install the battery. ANT.A ANT.B ANT.A ANT.B 4 1 5 2 3 6 7 8 9 10 5 6

BODYPACK TRANSMITTER CONNECTION 1. Lavalier Microphone Connection: Connect the connecter of supplied Lavalier microphone to the connecting jack of transmitter (Shown as below) Set the transmitter work state in wireless lavalier system. 2. Headset Microphone Connection: Connect the connecter of supplied Headset microphone to the connecting jack of transmitter(Shown as below) Set the transmitter work state in wireless headset system. TRANSMITTER BATTERY INSTALLATION 1. Battery Installation of Transmitter: Push open the battery cover,Insert the supplied batteries into battery jar in polarity and cover the battery Cover. 470.2 607.8MHz 50 164 8 Rotate counterclockwise to open. 7 8

13-15 300mA/500mA 185MM X 145MM X 43MM X2 7 238MM X 50MM X 50MM 250MM X 51MM X 51MM X2 7 100MM X 65MM X 30MM 9 10

FCC warning statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device operates on a no‐protection, no‐interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC‐2‐1‐28, Voluntary Licensing of License‐Exempt Low‐Power Radio Apparatus in the TV Bands.


Document Created: 2019-07-04 15:48:27
Document Modified: 2019-07-04 15:48:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC