Users Manual

FCC ID: QP8-4IN1TCORE

Users Manual

Download: PDF
FCCID_4203016

VN2000 Bill Acceptor Combo Front, Side & 4 in 1 Bezel Kit Installation Guide General Information The combo bezel kit has been designed to add a credit cards reader to a Series 2000 bill acceptors. The combo bezel replaces the compact bezel. To remove the compact bezel: 1. Remove four phillips screws (A) located on the front of the bill acceptor. Remove the bezel and mounting plate. Combo bezel installation 2. Place the combo bezel on the bill acceptor and install the four screws. Be cautious not to pinch or damage the bezel cable when installing the combo bezel. *See notes below Front Swipe Side Swipe 4 in 1 Contact our Technical Support @ 1-800-345-8172 with any questions. Notes: CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (a) This device may not cause harmful interference, and (b) this device must accept any interference received, including interference that may cause undesired operation. ©2019 CPI Part # 250054258 www.cranePI.com Revision G4


Document Created: 2019-02-28 17:04:51
Document Modified: 2019-02-28 17:04:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC