RF Exposure Info - SAR Report Appendix C - Cal certificates

FCC ID: QOQWT41E

RF Exposure Info

Download: PDF
FCCID_1602103

Report No. M110841 Page 45 of 67 APPENDIX C CALIBRATION DOCUMENTS 1. SN: 1380 Probe Calibration Certificate 2. SN: 724 DV2450V2 Dipole Calibration Certificate 3. SN: 442 DAE3 Data Acquisition Electronics Calibration Certificate Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 46 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 47 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 48 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 49 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 50 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 51 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 52 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 53 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 54 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 55 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 56 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 57 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 58 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 59 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 60 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 61 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 62 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Calibration Laboratory of «l / Schwelzerlscher Kallbrierdionst § %, Schmid & Partner Service sulsse d‘dtalonnage Engineering AG 2 3 Sorvizlo svizzoro dl taratura Zoughausstrasse 3, 6004 Zurich, Suitzeriand * ns Siss Callbration Sorvice Accredted by the Swiss Accredtation Sorvice (GAS) Accrediation No: SCS 108 The Siiss Accredtation Sorvice is one of the signatories o the EA Multlateral Agrooment for therecagnition of cabraton cort ates Cliont EMC Technologies Cerificate No: DAE3—442_Dec10 CALIBRATION CERTIFICATE Object DAES — SD 000 D03 AE — SN: 442 Caltraton procedure(s) QA CAL—06.v22 Calibration procedure for the data acquisition electronics (DAE) Callbation date: December 9, 2010 This caltiation cortfate documents the traceabiltyto natonal standards, which realze e ghysicalunts of measurements (8). The measurements and the uncenalnies wih confidence probabltyae given on thefaloving pages and are par othecorificate Allealbrations have been canducted in the losed laboratoy facliy: envranmonttomporature 22 3)°C and humidty< 70% Galraton Equipment used (MTE onteafor calbraton) Pimary Standards n« CalDate (Gorifiate No) Scheduled Gattbration Kelthly Mulimeter Type 2001 |SN:oatcere 28—80p—10 (No:toare) Sept1 Secondary Standarde EB Chock Date in house) Schoduled Chock Callator Box Vi1 SE UMS 006 AB 1008 OrJun—10 (in house checiy in house cheokc Junet1 Name Function Signature Caltvated by: ErcHanad Techrlcian Approved by: FinBomhot eb biecior W¥ I_e ecember 9,2010 Thiscallbration contfate shalnotbe reproduced oxeenti ful wihout witen approval ofthe laboratoy. Certficate No: DAES—442_Decto Page 1 of5 NLATA 0« scecee c smy wmemas rvvearmin rrrarmriuin ie e en revugrmure on oi ogerrnwnvew commiigy vammimve im rnpesiive rpunc ho reprvauces

Calibration Laboratory of . Sotweizerischr Kallorirdienst Schmid & Partner c Service sulsso dltalonnage Engineering AG Servislo svizzero dltaratura Zeughausstrasse 43, 8004 zurich, Suitzerland S suiss Calibrition Service Aceredted by the Siss Accredtation Servce (GAS) Accreatation No:: SCS 108 "The Siss Accreditation Service is one ofthe signatories to the EA MultLateral Agreement for the recognition of calbration certficates Glossary DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters * DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. * Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. * The following parameters as documented in the Appendix contain technical information as a result from the performancetest and require no uncertainty. * DC Voltage Measurement Linearity: Verification of the Linearity at +10% and —10% of the nominal calibration voltage. Influence of offset voltage is included in this measurement. * Common mode sensitivity: Influence of a positive or negative common made voltage on the differential measurement. * Channel separation: Influenceof a voltage on the neighbor channels not subject to an input voltage. * AD Converter Values with inputs shorted: Values on the internal AD converter corresponding to zero input voltage * Input Offset Measurement; Output voltage and statistical results over a large number of zero voltage measurements. * Input Offset Current: Typical value for information; Maximum channel input offset current, not considering the input resistance. * Input resistance: Typical value for information: DAE input resistance at the connector, during internal auto—zeroing and during measurement. * Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery alarm signal is generated. * Power consumption: Typical value for information. Supply currents in various operating modes. Gertficate No: DAE3—442_Decto Page 2 of5

DC Voltage Measurement AJD — Converter Resolution nominal High Range: 1is= 6.uV , full range = —100..+300 mV Low Range: ise= stnv , full range= —1.....+3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 seo Calibration Factors x y 2 High Range 404.396 + 0.1% (k=2) 405.036 + 0.1% (ke2) |_405.249 + 0.1% (k=2) Low Range 8.08405 + 0.7% (k=2) 8.97058 + 0.7%(ke2) |_8.97181 + 0.7% (k=2) Connector Angle Gonnector Angle to be used in DASY system 500°%1° Gertficate No: DAE3—442_Decto Page 3 of 5

Appendix 1. DC Voltage Linearity High Range Reading (uV) Difference (2V) Error (%) Channel X + input 2000138 sor 0.00 Channel X + input 20003.02 422 002 Channe! X — input —19900.59 207 001 Channe! Y _ _+ input 2000118 201 0.00 Channel Y + input 1800855 105 001 Channe! Y — input —19900.00 0.40 —0.00 Channel 2 _ _+ input 200011.0 202 0.00 Channel 2 _ _+ input 20001.60 120 o1 ChannelZ _ — input —20000.10 0.10 000 Low Range Reading (1V) Difference (1V) Error (%) Channel X___+ input 1900.1 —ors 004 Channel X + input 199.3 sr 018 Channel X — input —190.60 o.s0 025 Channe! Y _ _+ input 200.3 oss 002 Channel Y _ _+ input 198.00 110 —oss Channel Y — input 20188 —1se o.rr Channel 2 _ _+ input 2000.8 o.ce o03 Channel 2 _ _+ Input 10824 —168 oss ChannelZ _ — input —201.80 —1.60 o.e0 2. Common mode sensi DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 seo Common mode High Range Low Range Input Voltage (m¥V) Average Reading (uV) Average Reading (1V) Channel x 200 10.29 —12.05 +200 1223 t1.58 Channel Y 200 12 ~200 4138 Channe! Z 200 ses ~200 s61 3. Channel separation DASY measurement parameters: Auto Zero Time: 3 see; Measuring time: 3 seo Input Voltage (mV) Channel X (gV) Channel Y (uV) Channel 2 (uV) Channel X 200 — 1.80 046 Channel Y 200 257 — a27 Channe! Z 200 5.30 074 — Certficate No: DAES—442_Decto Page 4 of 5 m

4. AD—Converter Values with inputs shorted DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 seo High Range (LSB) Low Range (LSB) Channel X 15770 16980 Channel Y 15775 15083 Channe! 2 15584 17706 5. Input Offset Measurement DASY measurement parameters: Auto Zero Time: see; Measuring time: 3 seo Input 10M Average (1V) min. Offset (1V) max. oftset (uv) 5* '(’:“,’;“"’" Channe! X —aso 181 oss osr Channe! Y oor asr 048 osr Channel z 140 s3r B or? 6. Input Offset Current Nominal Input circulty offset current on all channels: <25(A 7. Input Resistance (Typical values for information) Zeroing (kOhm) Measuring (MOhm) Channe! X 200 200 Channel Y 200 200 Channel z 200 200 8. Low Battery Alarm Voltage (Typical values for nformation) Typical values Alarm Level (VDC) Supply (+ Vee) 78 Supply (—Vee) 76 9. Power Consumption (Typical values for nformation) Typical values Switched off (m¥) Stand by (m¥) Transmitting (ma) Supply (+ Vee) +001 15 a1e Supply (—Vee) —o.01 a a Certficate No: DAES—442_Decto Page 5 o5 ho mere


Document Created: 2011-12-12 07:45:59
Document Modified: 2011-12-12 07:45:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC