RF Exposure Info - SAR Report Appendix B - Plots

FCC ID: QOQWT41E

RF Exposure Info

Download: PDF
FCCID_1602102

Report No. M110841 Page 26 of 67 APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. Table 19 2450 MHz SAR Measurement Plot Numbers Test Plot Test Position No. Channel Lap Held 1 40 Edge On Primary Landscape 2 40 Edge On Primary Portrait 3 40 Edge On Secondary Portrait 4 40 5 01 Edge On Secondary Landscape 6 40 7 79 Table 20 2450MHz System verification Plot Plot 8 System verification 2450 MHz 26 August 2011 Plot 9 System verification 2450 MHz 01 September 2011 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 27 of 67 Test Date: 26 August 2011 File Name: M110841 2450 MHz Bluetooth (DH5) Lap Held (DAE442 Probe1380) 26-08-11.da52:0 DUT: Handheld Group Tablet PC; Type: CC61; Serial: Pre-production sample * Communication System: Bluetooth 2.0 DH5; Frequency: 2441 MHz; Duty Cycle: 1:2.5704 * Medium parameters used: f = 2440 MHz; σ = 1.961 mho/m; εr = 51.315; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 40 Test/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.046 mW/g Configuration/Channel 40 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.666 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 0.088 W/kg SAR(1 g) = 0.043 mW/g; SAR(10 g) = 0.024 mW/g Maximum value of SAR (measured) = 0.047 mW/g 0 dB = 0.050mW/g SAR MEASUREMENT PLOT 1 Ambient Temperature 19.8 Degrees Celsius Liquid Temperature 19.7 Degrees Celsius Humidity 48% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 28 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 29 of 67 Test Date: 26 August 2011 File Name: M110841 2450 MHz Bluetooth (DH5) Primary Landscape (DAE442 Probe1380) 26-08-11.da52:0 DUT: Handheld Group Tablet PC; Type: CC61; Serial: Pre-production sample * Communication System: Bluetooth 2.0 DH5; Frequency: 2441 MHz; Duty Cycle: 1:2.5704 * Medium parameters used: f = 2440 MHz; σ = 1.961 mho/m; εr = 51.315; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 40 Test/Area Scan (61x181x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.011 mW/g Configuration/Channel 40 Test/Zoom Scan (8x9x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.568 V/m; Power Drift = -0.48 dB Peak SAR (extrapolated) = 0.015 W/kg SAR(1 g) = 0.00468 mW/g; SAR(10 g) = 0.00223 mW/g Maximum value of SAR (measured) = 0.00528 mW/g 0 dB = 0.0053mW/g SAR MEASUREMENT PLOT 2 Ambient Temperature 19.8 Degrees Celsius Liquid Temperature 19.7 Degrees Celsius Humidity 48% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 30 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 31 of 67 Test Date: 26 August 2011 File Name: M110841 2450 MHz Bluetooth (DH5) Primary Portrait (DAE442 Probe1380) 26-08-11.da52:0 DUT: Handheld Group Tablet PC; Type: CC61; Serial: Pre-production sample * Communication System: Bluetooth 2.0 DH5; Frequency: 2441 MHz; Duty Cycle: 1:2.5704 * Medium parameters used: f = 2440 MHz; σ = 1.961 mho/m; εr = 51.315; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 40 Test/Area Scan (61x121x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.00537 mW/g Configuration/Channel 40 Test/Zoom Scan (7x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.133 V/m; Power Drift = -0.22 dB Peak SAR (extrapolated) = 0.013 W/kg SAR(1 g) = 0.00294 mW/g; SAR(10 g) = 0.00127 mW/g Maximum value of SAR (measured) = 0.00372 mW/g 0 dB = 0.0037mW/g SAR MEASUREMENT PLOT 3 Ambient Temperature 19.8 Degrees Celsius Liquid Temperature 19.7 Degrees Celsius Humidity 48% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 32 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 33 of 67 Test Date: 26 August 2011 File Name: M110841 2450 MHz Bluetooth (DH5) Sec Portrait (DAE442 Probe1380) 26-08-11.da52:0 DUT: Handheld Group Tablet PC; Type: CC61; Serial: Pre-production sample * Communication System: Bluetooth 2.0 DH5; Frequency: 2441 MHz; Duty Cycle: 1:2.5704 * Medium parameters used: f = 2440 MHz; σ = 1.961 mho/m; εr = 51.315; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 40 Test/Area Scan (61x121x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.052 mW/g Configuration/Channel 40 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.199 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 0.110 W/kg SAR(1 g) = 0.051 mW/g; SAR(10 g) = 0.028 mW/g Maximum value of SAR (measured) = 0.055 mW/g 0 dB = 0.050mW/g SAR MEASUREMENT PLOT 4 Ambient Temperature 19.8 Degrees Celsius Liquid Temperature 19.7 Degrees Celsius Humidity 48% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 34 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 35 of 67 Test Date: 1 September 2011 File Name: M110841 2450 MHz Bluetooth (DH5) Sec Land -1.5dB (DAE442 Probe1380) 01-09-11.da52:0 DUT: Handheld Group Tablet PC; Type: CC61; Serial: Pre-production sample * Communication System: Bluetooth 2.0 DH5; Frequency: 2402 MHz; Duty Cycle: 1:2.5704 * Medium parameters used: f = 2402 MHz; σ = 1.875 mho/m; εr = 51.341; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 1 Test/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.860 mW/g Configuration/Channel 1 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 6.926 V/m; Power Drift = -0.21 dB Peak SAR (extrapolated) = 2.899 W/kg SAR(1 g) = 1.13 mW/g; SAR(10 g) = 0.493 mW/g Maximum value of SAR (measured) = 1.230 mW/g 0 dB = 1.230mW/g SAR MEASUREMENT PLOT 5 Ambient Temperature 20.5 Degrees Celsius Liquid Temperature 20.3 Degrees Celsius Humidity 45% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 36 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 37 of 67 Test Date: 26 August 2011 File Name: M110841 2450 MHz Bluetooth (DH5) Sec Landscape (DAE442 Probe1380) 26-08-11.da52:0 DUT: Handheld Group Tablet PC; Type: CC61; Serial: Pre-production sample * Communication System: Bluetooth 2.0 DH5; Frequency: 2441 MHz; Duty Cycle: 1:2.5704 * Medium parameters used: f = 2440 MHz; σ = 1.961 mho/m; εr = 51.315; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 40 Test/Area Scan (61x181x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 2.035 mW/g Configuration/Channel 40 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.961 V/m; Power Drift = 0.0051 dB Peak SAR (extrapolated) = 3.186 W/kg SAR(1 g) = 1.21 mW/g; SAR(10 g) = 0.526 mW/g Maximum value of SAR (measured) = 1.301 mW/g 0 dB = 1.300mW/g SAR MEASUREMENT PLOT 6 Ambient Temperature 19.8 Degrees Celsius Liquid Temperature 19.7 Degrees Celsius Humidity 48% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 38 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 39 of 67 Test Date: 1 September 2011 File Name: M110841 2450 MHz Bluetooth (DH5) Sec Land -1.5dB (DAE442 Probe1380) 01-09-11.da52:0 DUT: Handheld Group Tablet PC; Type: CC61; Serial: Pre-production sample * Communication System: Bluetooth 2.0 DH5; Frequency: 2480 MHz; Duty Cycle: 1:2.5704 * Medium parameters used: f = 2480 MHz; σ = 1.993 mho/m; εr = 50.858; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 79 Test/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.866 mW/g Configuration/Channel 79 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.983 V/m; Power Drift = -0.37 dB Peak SAR (extrapolated) = 3.136 W/kg SAR(1 g) = 1.17 mW/g; SAR(10 g) = 0.503 mW/g Maximum value of SAR (measured) = 1.324 mW/g 0 dB = 1.320mW/g SAR MEASUREMENT PLOT 7 Ambient Temperature 20.5 Degrees Celsius Liquid Temperature 20.3 Degrees Celsius Humidity 45% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 40 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 41 of 67 Test Date: 26 August 2011 File Name: M110841 System Check 2450 MHz 26-08-11.da52:0 DUT: Dipole 2450 MHz; Type: DV2450V2; Serial: 724 * Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1:1 * Medium parameters used: f = 2450 MHz; σ = 1.975 mho/m; εr = 51.251; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 1 Test/Area Scan (51x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 17.301 mW/g Configuration/Channel 1 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 88.196 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 33.035 W/kg SAR(1 g) = 14.8 mW/g; SAR(10 g) = 6.98 mW/g Maximum value of SAR (measured) = 16.263 mW/g 0 dB = 16.260mW/g SAR MEASUREMENT PLOT 8 Ambient Temperature 19.8 Degrees Celsius Liquid Temperature 19.7 Degrees Celsius Humidity 48% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 42 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 43 of 67 Test Date: 1 September 2011 File Name: System Check 2450 MHz 01-09-11.da52:0 DUT: Dipole 2450 MHz; Type: DV2450V2; Serial: 724 * Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1:1 * Medium parameters used: f = 2450 MHz; σ = 1.949 mho/m; εr = 51.042; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 1 Test/Area Scan (51x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 16.898 mW/g Configuration/Channel 1 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 88.463 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 32.484 W/kg SAR(1 g) = 14.6 mW/g; SAR(10 g) = 6.88 mW/g Maximum value of SAR (measured) = 16.120 mW/g 0 dB = 16.120mW/g SAR MEASUREMENT PLOT 9 Ambient Temperature 20.5 Degrees Celsius Liquid Temperature 20.3 Degrees Celsius Humidity 45% Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M110841 Page 44 of 67 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall only be reproduced in full, with the exception of the certificate on p3


Document Created: 2011-12-12 07:47:32
Document Modified: 2011-12-12 07:47:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC