SAR Report 19.3 Probe

FCC ID: QOQWT41

RF Exposure Info

Download: PDF
FCCID_2106365

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client CCS—TW (Auden) Certificate No: EX3-3665_May1 3 CALIBRATION CERTIFICATE Object EX3DV4 — SN:3665 Calibration procedure(s) QA CAL—01.v8, QA CAL—14.v3, QA CAL—23.v4, QA CAL—25.v4 Calibration procedure for dosimetric E—field probes Calibration date: May 7, 2013 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter E4419B GB41293874 04—Apr—13 (No. 217—01733) Apr—14 Power sensor E4412A MY41498087 04—Apr—13 (No. 217—01733) Apr—14 Reference 3 dB Attenuator SN: 5054 (3c) 04—Apr—13 (No. 217—01737) Apr—14 Reference 20 dB Aftenuator SN: S5277 (20x) 04—Apr—13 (No. 217—01735) Apr—14 Reference 30 dB Aftenuator SN: 5129 (30b) 04—Apr—13 (No. 217—01738) Apr—14 Reference Probe ES3DV2 SN: 3013 28—Dec—12 (No. ES3—3013_Dec12) Dec—13 DAE4 SN: 660 31—Jan—13 (No. DAE4—660_Jan13) Jan—14 Secondary Standards ID Check Date (in house) Scheduled Check RF generator HP 8648C US3642U01700 4—Aug—99 (in house check Apr—13) In house check: Apr—15 Network Analyzer HP 8753E US37390585 18—Oct—01 (in house check Oct—12) In house check: Oct—13 Name Function Calibrated by: Claudio Leubler Laboratory Technician Approved by: Katja Pokovic Technical Manager ie Issued: May 8, 2013 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EX3—3665_May13 Page 1 of 11

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one ofthe signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,y,z sensitivity in free space ConvF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B,C, D modulation dependentlinearization parameters Polarization p ip rotation around probe axis Polarization $ 8 rotation around an axis thatis in the plane normal to probe axis (at measurement center), .e., 9 = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 Methods Applied and Interpretation of Parameters: e NORMx,y,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E—field uncertainty inside TSL (see below ConvF). e NORM(Mx,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. e DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. * PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics e Axy,zi Bxy.z Cxy,z; Dxy.z; VRxy,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. * ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. * Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. e Sensor Offset: The sensoroffset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Certificate No: EX3—3665_May13 Page 2 of 11

EX3DV4 — SN:3665 May 7, 2013 Probe EX3DV4 SN:3665 Manufactured: October 20, 2008 Calibrated: May 7, 2013 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: EX3—3665_May13 Page 3 of 11

EX3DV4— SN :3665 May 7, 2013 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3665 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (uV/(V/im))" 0.50 0.58 0.52 +10.1% DCP (mV)" 98.8 97.7 99.8 Modulation Calibration Parameters UID Communication System Name A B C D VR Unc® dB dBvuV dB mV (k=2) 0 CW x 0.0 0.0 1.0 0.00 173.8 £2.7 % y 0.0 0.0 1.0 167.0 Z 0.0 0.0 1.0 166.4 The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of NormX,Y,Z do not affect the E—field uncertainty inside TSL (see Pages 5 and 6). ° Numerical linearization parameter: uncertainty not required. & Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EX3—3665_May13 Page 4 of 11

EX3DV4— SN:3665 May 7, 2013 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3665 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth Unct. f(MHz)© |_Permittivity" (S/m)" ConvFX ConvFY ConvFZ Alpha (mm) (k=2) 750 41.9 0.89 10.20 10.20 10.20 0.27 1.13 * 12.0 % 835 41.5 0.90 9.85 9.85 9.85 0.60 0.64 * 12.0 % 900 41.5 0.97 9.78 9.78 9.78 0.64 0.63 £12.0 % 1750 40.1 1.37 8.38 8.38 8.38 0.36 0.83 *12.0 % 1900 40.0 1.40 8.12 8.12 8.12 0.29 0.99 *12.0 % 2000 40.0 1.40 8.07 8.07 8.07 0.69 0.63 * 12.0 % 2450 39.2 1.80 721 7.31 7.31 0.27 1.03 * 12.0 % 2600 39.0 1.96 7.15 7.15 718 0.38 0.89 £12.0 % 5200 36.0 4.66 5.24 5.24 5.24 0.32 1.80 £*13.1 % 5300 35.9 4.176 5.05 5.05 5.05 0.30 1.80 $181% 5500 35.6 4.96 4.93 4.93 4.93 0.34 1.80 £13.1 % 5600 35.5 5.07 4.81 4.81 4.81 0.30 1.80 *181% 5800 35.3 5.27 4.70 4.70 4.70 0.40 1.80 *13.1 % © Frequency validity of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty atcalibration frequency and the uncertainty for the indicated frequency band. " At frequencies below 3 GHz, the validity of tissue parameters (c and &) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (s and a) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. Certificate No: EX3—3665_May13 Page 5 of 11

EX3DV4— SN:3665 May 7, 2013 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3665 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth Unct. f(MHz)* Permittivity" (S/m)" ConvFX ConvFY ConvFZ Alpha _(mm) (k=2) 750 §5.5 0.96 9.92 9.92 9.92 0.62 0.71 *12.0 % 835 $5.2 0.97 9.82 9.82 9.82 0.69 0.66 * 12.0 % 900 85.0 1.05 9.73 9.73 9.73 0.44 0.84 +12.0 % 1750 53.4 1.49 8.06 8.06 8.06 0.34 0.93 +12.0 % 1900 53.3 1.52 7.75 778 7.16 0.20 1.33 £12.0 % 2000 53.3 1.52 7.89 7.89 7.89 0.62 0.70 *12.0 % 2450 §2.7 1.95 7.40 7.40 7.40 0.80 0.50 *12.0 % 2600 52.5 2.16 719 7.19 7.19 0.80 0.50 * 12.0 % 5200 49.0 5.30 4.44 4.44 4.44 0.43 1.90 #131 % 5300 48.9 5.42 4.27 4.27 4.27 0.41 1.90 *181% 5500 48.6 5.65 4.05 4.05 4.05 0.42 1.90 £13.1% 5600 48.5 5.77 4.07 4.07 4.07 0.30 1.90 *13.1 % 5800 48.2 6.00 4.38 4.38 4.38 0.44 1.90 £181% © Frequency validity of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. * At frequencies below 3 GHz, the validity of tissue parameters (s and 0) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and 0) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. Certificate No: EX3—3665_May13 Page 6 of 11

EX3DV4— SN:3665 May 7, 2013 Frequency Response of E—Field Frequency response (normalized) (TEM—Cell:ifi110 EXX, Waveguide: R22) ; 1. 3 0.5 \\Iljill\l i I I 1000 6— 1500 2000 o on o f [MHz] Td Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: EX3—3665_May13 Page 7 of 11

EX3DV4— SN:3665 May 7, 2013 Receiving Pattern (¢6), 8 = 0° f=600 MHz,TEM f=1800 MHz,R22 eine. | | e *n on. =====| 4s ~ | | x . t . | / * s | ’," ’/ ® \ || | Error [dB] 100 MHz 600 MHz 1800 MkHz Ce)MHz 2500 Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—3665_May13 Page 8 of 11

EX3DV4— SN:3665 May 7, 2013 Dynamic Range f(SARneaq) (TEM cell , f= 900 MHz) 105 Input Signal [uV] 1047 10%— 103 102 101 10° 101 10 103 SAR [mW/icm3] not compensated compensated Error [dB] se —2 T T T t— 103 102 101 10° 101 102 103 SAR [mW/em3] not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3665_May13 Page 9 of 11

EX3DV4— SN:3665 May 7, 2013 Conversion Factor Assessment f= 835 MHz,WGLS R9 (H_convF) f= 1900 MHz,WGLS R22 (H_convF) E n as4 4. t i h 0| ".\\ 251". 5 2,5-{: \— § 20_: \\ i 2.01'F % g \ & 151 Of \% § *LF \A } %& 10 * 10 . y * E * "m os| \\ # \\ f rex] | (esks. 0 10 20 3 40 5o co 0 5 10 15 20 25 3 35 40 z {mm} z{mm} Le] Le] Ce] anayical measured anabtical measired Deviation from Isotropy in Liquid Error (¢, 9), f = 900 MHz Deviation ~1.0 —0.8 —0.6 —0.4 —0.2 0.0 02 04 0.6 08 1.0 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EX3—3665_May13 Page 10 of 11

EX3DV4— SN:3665 May 7, 2013 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3665 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) —18.3 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 2 mm Certificate No: EX3—3665_May13 Page 11 of 11


Document Created: 2013-05-23 16:58:46
Document Modified: 2013-05-23 16:58:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC