Modular Approval Letter

FCC ID: QOQWT12

Cover Letter(s)

Download: PDF
FCCID_645420

23/03/ 2005    14148        +359941240452                           BLUEGIGA OY                                         SIVU     02




    B                a1gaa


                                Modular Approval Request Letter

    Mar. 01, 2006

    Dear Application Examiner,

    Bi iegiga Technologies / Bluetooth Module, FCC ID: QOQWT12 would like to                            ve your
    au horization as a modular approval, The requirements of Public Notice DAOO—                       07 have been met
    an i shown on the following statements.

    J ms to be covered                                                                         Ansilerfrom applicant
     1.   The modular transmitter must have its own RF shielding.                              Yes. he EUT has its own RF
                                                                                               shielffing.
    2     The modular transmitter must have buffered modulation/data inputs (if such inputs    The §UT has buffered data
   |      are provided) to ensure that the module will comply with Part 15 requirements        inpuSht‘s integrated in chip        1
   x      under conditions of excessive data rates or over—modulation,                         Blueffore4.                         |
     3.   The roodular transmitter must bave its own power supply regulation.                  The HUT has its own power
                                                                                               suppp regulation it‘s
    _                                                                                        integilated in chip BlueCore4.
    4.    The modular transmitter must comply with the anterna requirements of Section The            MUT meets the FCC
          15,203 and 15.204(c). The antenna roust cither be permanently attached or employ anterfha    requirements, a
          a "unique" anfenna coupler (at all connections between the module and the antenna, pertvilinently attached antenna
          including the cable)..                                                             and ghoto of antenna are
                                                                                               show$   in the section internal
   |__                                                                                         phot
   5.     The modular transmitter must be tested in stand—alone configuration, i.e., the       The     MIUT was tested in a
          module must not be inside another device during testing. This is intended to         standfglone configuration via a |
          demonstrate that the module is capable of complying with Part 15 emissionlimits              Please see section
          regardless of the device into which it is eventually installed.
  J




           The modulat transmitter must be labeled with its own FCC ID number, and, if
          the FCC ID is not visible whenthe module is installed inside another device, then
          the outside of the device into which the module is installed must also display a
          label referring to the enclosed module. This exterior labe] can use wording such
          as the following: "Contains Transmitter Module FCC ID: XYZMODEL1® or
          "Contains FCC ID: XYZMODEL1." Any similar wording that expresses the
          same meaning may be used. The Grantee may either provide such a label, en
          example of which must be included in the application for equipment
          authorization, or, must provide adequate instructions aloug with the module
          which explain this requirement, In the latter case, a copy of these instructions
          must be included in the applicationfor equipment authorization,
  CI




          The modular trapsmitter must comply with any specific rule or operating                    JT is compliant with all
          requirements applicable to the transmitter and the manufacturer must provide               ble FCC rules. Details
          adequate instructions along with the module to explain any such requirements. A            tions for mainiaining
          copy ofthese instructions must be included in the application for equipment          compfiance are give in the
          authorization. For example, there are very strict operational and timing             User Wanual.
          requirements that must be met before a transmitter is authorized for operation
          under Section 15,231. For instance, dats transmission is prohibited, except for
          operation under Section 15.231(e), in which case there are separate field strength
          level and timing requirements. Compliance with these requirements must be
          assured.


23/03/ 2006         14:48         +353941240452                           BLUEGIGA OY                                         SIVY      03




    t+ou   a    w ow e c    e a   4    a   e




                                                                                                                                          !
   |‘8         The modulat transmitter must comply with any applicable RF exposure                      The $UT is complies with RF
               requirements. For example, PCC Rules in Sections 2.1091, 2.1093 and specific             expoffure requirement. RF
               Sections of Part 15, including 15.319(i), 15.407(8, 15.253(f) and 15.255(g),             expollure is addressed in the
               require that Unlicensed PCS, UNIand millimeter wave devices perform routine          | RF        sure exhibition.
               environmental evaluation for RF Exposure to demonstrate compliance. In               ‘


                                                                                                                                         i
               addition, spread spectrum transmitters operating under Section 15.247 are
               required to address RF Exposure compliance in accordance with Section
               15,247(b)(4). Modular transmitters approved under other Sections of Part 15,


                                                                                                                                         1
               when necessary, may also need to address certain RF Exposure concems,
               typically by providing specific installation and operating instructions for users,   |
   L           installers and other interested parties to ensure compliance.                        1




   Be it regards,




   Mi cae) Bjorkas, VP                Pro uction
   Bli egiga Technologies Inc.



Document Created: 2006-03-24 08:41:45
Document Modified: 2006-03-24 08:41:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC