Test Report 02

FCC ID: QOQMGM13P

Test Report

Download: PDF
FCCID_3767786

                                                                                                      Reference number: 289935—1—3
                                                                                                                       Page 1 of 10




                                        Test’Report
                                                           FINAsS
                                                           Finnish Accreditation Service
                                                           T004 (EN ISO/EC 17025)



   INTENTIONAL RADIATOR TESTS ACCORDING TO FCC PART 15 C AND
                   ISED CANADA REQUIREMENTS


                  Equipment Under Test:             Multi—Protocol Wireless Module

                  Model:                           MGM13PO2ZA
                                                   MGM13PO2E

                  Manufacturer:                    Silicon Laboratories Finland Oy
                                                   Bertel Jungin aukio 3
                                                   FI—02600 ESPOO
                                                   FINLAND

                  Customer:                        Silicon Laboratories Finland Oy
                                                   Bertel Jungin aukio 3
                                                   FI—02600 ESPOO
                                                   FINLAND

                  FCC Rule Part:                   15.247: 2017
                  IC Rule Part:                    RSS—247, Issue 2, 2017
                                                   RSS—GEN Issue 4, 2014
                  KDB:                             Guidance for Performing Compliance
                                                   Measurements on Digital Transmission Systems
                                                   (DTS) Operating Under §15.247 (April 5, 2017)




Date:                 2 November 2017                                   Date:                2 November 2017

Issued by:         M {Z /                                               Checked by:               é

                     Emil Haverinen                                                          Rauno Re
                     Testing Engineer                                                        Testing Engineer




These test results are valid for the tested unit only.
This report shall not be reproduced, except in full, without a written permission of SGS Fimko.


                                                                                                                          Reference number: 289935-1-3
                                                                                                                                          Page 2 of 10

                                                                                                                                             Table of Contents


PRODUCT DESCRIPTION .................................................................................................................................. 3
  Equipment Under Test (EUT) .......................................................................................................................... 3
  Description of the EUT .................................................................................................................................... 3
  Ratings and declarations ................................................................................................................................. 3
  Power Supply .................................................................................................................................................. 3
  Mechanical Size of the EUT ............................................................................................................................ 3
  Samples........................................................................................................................................................... 3

GENERAL REMARKS.......................................................................................................................................... 4
  Disclaimer ........................................................................................................................................................ 4

SUMMARY OF TESTING..................................................................................................................................... 5
  EUT Test Conditions during Testing ............................................................................................................... 5

TEST RESULTS ................................................................................................................................................... 6
  Maximum Peak Conducted Output Power ...................................................................................................... 6
  99% Occupied Bandwidth ............................................................................................................................... 8

TEST EQUIPMENT .............................................................................................................................................. 10


                                                                                  Reference number: 289935-1-3
                                                                                                  Page 3 of 10

                                                                                            Product Description

PRODUCT DESCRIPTION
Equipment Under Test (EUT)
    Trade mark:                Silicon Labs
    Model:                     MGM13P02A, MGM13P02E
    Type:                      Multi-Protocol Wireless Module
    Serial no:                 -
    FCC ID:                    QOQMGM13P
    IC:                        5123A-MGM13P

Description of the EUT
MGM13P is a multi-protocol wireless module with two antenna variants. Variant A is equipped with chip antenna
while the E variant has RF connector for the use of external antenna.

This test report contains test results for ZigBee.

Classification of the device
    Fixed device
    Mobile Device (Human body distance > 20cm)
    Portable Device (Human body distance < 20cm)

Modifications Incorporated in the EUT
-

Ratings and declarations
    Operating Frequency Range (OFR):           2405 - 2480 MHz
    Channels:                                  15
    Channel separation:                        5 MHz
    Effective conducted power:                 11.16 dBm (Peak)
    Modulation:                                GFSK
    Integral Antenna gain:                     A-variant: 1 dBi
    External Antenna gain:                     E-variant: 2.14 dBi

Power Supply
    Operating voltage range:   2.0 - 3.8 VDC (tested with 3.3V regulated by the development board)

    The EUT was powered from the development board which was powered by PC.

Mechanical Size of the EUT
    Height: 2 mm               Width: 20 mm                  Length: 15 mm

Samples
One sample was used in tests.
           EUT                                              Description
      1. MGM13P02E                   Original E variant with RF connector for external antenna


                                                                                   Reference number: 289935-1-3
                                                                                                   Page 4 of 10

                                                                                                 General remarks

GENERAL REMARKS
Disclaimer
This document is issued by the Company under its General Conditions of service accessible at
http://www.sgs.com/terms_and_conditions.htm. attention is drawn to the limitation of liability,
indemnification and jurisdiction issues defined therein.

Any holder of this document is advised that information contained hereon reflects the Company's findings at the
time of its intervention only and within the limits of Client's instructions, if any. The Company's sole
responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent
of the law.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such
sample(s) are retained for 90 days only. This document cannot be reproduced except in full, without prior
approval of the Company.


                                                                                Reference number: 289935-1-3
                                                                                                Page 5 of 10

                                                                                        Summary of Testing


SUMMARY OF TESTING
             Test Specification                                 Description of Test                   Result
        §15.207(a) / RSS-GEN 8.8                  Conducted Emissions on Power Supply Lines            N/T
     §15.247(b)(3) / RSS-247 5.4(d)                 Maximum Peak Conducted Output Power               PASS
     §15.247(a)(2) / RSS-247 5.2(a)                               6 dB Bandwidth                       N/T
       §15.247(e) / RSS-247 5.2(b)                             Power Spectral Density                  N/T
               RSS-GEN 6.6                                    99% Occupied Bandwidth                  PASS
        §15.247(d) / RSS-247 5.5               100 kHz Bandwidth of Frequency Band Edges and           N/T
                                                       Conducted Spurious Emissions
  §15.209(a), §15.247(d) / RSS-247 5.5          Radiated Emissions Within the Restricted Bands         N/T

Possible test case verdicts:
EUT does meet the requirement:                 P (Pass)
EUT does not meet the requirement:             F (Fail)
Test was not performed by SGS Fimko:           N/T




EUT Test Conditions during Testing
The EUT was in continuous transmit mode during all the tests. The hopping was stopped and the EUT was
configured into the wanted channel using software provided by the manufacturer.
During conducted measurements, the EUT was connected to WSTK development board.

Following channels and settings were used during the tests;

EUT 1. MGM13P02E
             Frequency             Power
  Channel
               (MHz)               setting
      11             2405            104
      19             2445            104
      26             2480            104


Test Facility

           Testing Location / address:         SGS Fimko Ltd
           FCC registration number: 90598      Särkiniementie 3
                                               FI-00210, HELSINKI
                                               FINLAND
           Testing Location / address:         SGS Fimko Ltd
           FCC registration number: 178986     Karakaarenkuja 4
           Industry Canada registration        FI-02610, ESPOO
           number: 8708A-2                     FINLAND


                                                                                 Reference number: 289935-1-3
                                                                                                 Page 6 of 10

                                                                       Maximum Peak Conducted Output Power

TEST RESULTS

Maximum Peak Conducted Output Power
 Standard:                     ANSI C63.10              (2013)
 Tested by:                    JAT
 Date:                         23 October 2017
 Temperature:                  23 ± 3 °C
 Humidity:                     20 - 60 % RH
 Measurement uncertainty:       2.87dB                 Level of confidence 95 % (k = 2)

FCC Rule: 15.247(b)(3)
RSS-247 5.4(d)

For systems using digital modulation in the 2400-2483.5 MHz bands the limit is 1 Watt. As an alternative to a
peak power measurement, compliance with the one Watt limit can be based on a measurement of the maximum
conducted output power.

Measured values are peak values.

Results:

Table 1: Maximum conducted output power
                     Conducted Power
       Channel                            Limit [dBm]            Margin [dBm]      Result
                         [dBm]
       11 Low             11.16               30                    18.84           PASS
       19 Mid             10.48               30                    19.52           PASS
       26 High            10.73               30                    19.27           PASS




                                Figure 1: Conducted power, Channel 11 low


                                             Reference number: 289935-1-3
                                                             Page 7 of 10

                               Maximum Peak Conducted Output Power




Figure 2: Conducted power, Channel 19 mid




Figure 3: Conducted power, Channel 26 high


                                                                          Reference number: 289935-1-3
                                                                                          Page 8 of 10

                                                                            99 % Occupied Bandwidth

99% Occupied Bandwidth
 Standard:                        RSS-GEN             (2014)
 Tested by:                       JAT
 Date:                            23 October 2017
 Temperature:                     23 ± 3 °C
 Humidity:                        20 - 60 % RH

RSS-GEN 6.6

Results:
Table 2: 99% occupied bandwidth test results
      Channel             Limit           99 % BW [MHz]        Result
       11 Low               -              2.230555295         PASS
       19 Mid               -              2.247429768         PASS
      26 High               -              2.242742414         PASS




                                      Figure 4: 99% OBW, Channel 11 low


                                     Reference number: 289935-1-3
                                                     Page 9 of 10

                                       99 % Occupied Bandwidth




Figure 5: 99% OBW, Channel 19 mid




Figure 6: 99% OBW, Channel 26 high


                                                                                      Reference number: 289935-1-3
                                                                                                     Page 10 of 10

                                                                                                  Test Equipment

TEST EQUIPMENT

RF-Test Equipment
Equipment      Manufacturer     Type          Inv or serial Prev Calib   Next Calib
ATTENUATOR     PASTERNACK       10dB DC-40GHz -            -             -
SIGNAL ANALYZER ROHDE & SCHWARZ FSV40         inv:9093     2017-07-07 2018-07-07



Document Created: 2017-11-03 09:07:54
Document Modified: 2017-11-03 09:07:54

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC