User manual

FCC ID: QOB-RTB400Q-1200Y

Users Manual

Download: PDF

FCCID_4327333

BT REMOTE CONTROL

User’s Guide

Version 1.0

Page 1 of 6

Table Of Contents
Using the Remote Control ------------------------------------ 3

Batteries --------------------------------------------------------- 4

Compliance statement ----------------------------------------- 5

Page 2 of 6

Technical Specifications
GE 42192
Model No.
Philips SRP2017B
Bluetooth Version BLE 4.2, Class 2 device
Frequency band/Output Power 2.4GHz ~ 2.4835GHz / ≦0dBm
Up to 30meters outdoor line of sight, in
RF Operating Distance
unobstructed environment
Powered by AAA x 2pcs
Power input Alkaline batteries are recommended for the
unit.
Operating: -10°C ~ 40°C
Operating and Storage Temp.
Storage: -10°C ~ 50°C
Dimension (L x W x T) 190mm x 49mm x 28mm
Weight 87.8g (not included batteries)

Maintenance
1. Do not expose your unit to dust, strong sunlight, humidity, high temperatures or
mechanical shocks.
2. Use new batteries of the recommended type and size only.
3. Do not use old and new batteries together as old batteries tend to leak.
4. To avoid chemical leaks, remove batteries from the unit if you do not intend to
use the unit for an extended period of time.
5. Do not use corrosive or abrasive cleansers on your unit.
6. Use a wet water cloth to clean the soft plastic surface, do not use any detergent or
cleaning agent.
7. Keep the unit dust free by wiping it with a soft, dry cloth.
8. Do not disassemble the unit, it contains no user-serviceable parts.

Warnings
 Do not modify the unit in any way.
 Risk of fire.
 Risk of electrical shock.
 Risk of burns.
 Do not dispose of electrical appliances and unsorted municipal waste. Use separate
collection facilities. Contact your local government for information regarding the
collection systems available.
 There are no user serviceable parts in this unit.

Caution
 Risk of explosion if battery is replaced by an incorrect type.
 Dispose of used batteries according to the instructions.

Page 5 of 6

Compliance Statement
Trademark
“The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Jasco Product Company, LLC, is under license. Other trademarks
and trade names are those of their respective owners.”

JASCO Products Company LLC
10 E. Memorial Road,
Oklahoma City, OK 73114.
Visit www.jascoproducts.com

Printed in China
Page 6 of 6

SRP2017B/27 V1 6/2019

FCC Statement
Suppliers Declaration of Conformity | Model #: SRP2017B/27
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio orTV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur ina particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
moreof the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ICES-3(B)/NMB-3(B)

MADE IN CHINA
Philips and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license. This product has
been manufactured by and is sold under the responsibility of
Jasco Products Company, and Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114 is the warrantor in
relation to this product.
This product comes with a limited-lifetime warranty.
Visit www.philips.com/support for warranty details.
Questions? Contact our US-based Consumer Care Center
at 1-844-816-0320 between 7AM—8PM CST.

42192 V1 6/2019

FCC Statement
Suppliers Declaration of Conformity | Model #: 42192
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114,
www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio orT V
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur ina particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
moreof the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
ICES-3(B)/NMB-3(B)

MADE IN CHINA
GE is a trademark of General Electric Company and is under license by J asco
Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114
This product comes with a limited-lifetime warranty. V
isit www.byjasco.com
for warranty details.
Questions? Contact our US-based Consumer Care Center
at 1-844-816-0320 between 7AM—8PM CST.

Document Created: 2019-06-20 15:10:00
Document Modified: 2019-06-20 15:10:00

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC