FCC UNII Device Declaration Letter

FCC ID: QLEGWSSKIT

Cover Letter(s)

Download: PDF
FCCID_3921575

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID：QLEGWSSKIT (1) DFS Device:  Master  Client with Radar detection capability ■ N/A  Client without radar detection capability, (2) Active / Passive Scanning , adhoc mode access point capability Frequency Active Scanning passive scanning Ad Hoc Mode Access point Band (MHz) (the device can (where the device Capability Capability transmit a probe is can listen only (beacon)) with no probes) 2424-2466  Yes  No  Yes  No  Yes  No  Yes  No 5745-5825  Yes  No  Yes  No  Yes  No  Yes  No 5755-5795  Yes  No  Yes  No  Yes  No  Yes  No 5180-5240  Yes  No  Yes  No  Yes  No  Yes  No 5190-5230  Yes  No  Yes  No  Yes  No  Yes  No 5260-5320  Yes  No  Yes  No  Yes  No  Yes  No 5270-5310  Yes  No  Yes  No  Yes  No  Yes  No 5500-5700  Yes  No  Yes  No  Yes  No  Yes  No 5510-5670  Yes  No  Yes  No  Yes  No  Yes  No (3) Country code selection ability  Yes  No If yes, pls explain how it was implemented: (4) Meet 15.202 requirement  Yes  No pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer.  Apply  Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled)

Name: Joseph Zhang/ Senior Product Manager Company: 15365 Barranca Pkwy Irvine, CA 92618, USA Tel: (949) 453-8782 1404 Fax: (949) 453-8785 E-mail: jzhang@iogear.com


Document Created: 2018-07-11 16:30:55
Document Modified: 2018-07-11 16:30:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC