Test Report

FCC ID: QLE-GWAV8141KRX

Test Report

Download: PDF
FCCID_1289617

www.kes.co.kr TEST REPORT For FCC Test Report No. : TK-FR10020 Date of Issue : 05/24/2010 Description of Product : Wireless HD Kit Model No. : GWAV8141K Applicant : ATEN Technology, Inc., bda IOGEAR, bda IOGEAR 19641 Da Vinci, Foothill Ranch, California 92610, USA Manufacturer : I DO IT CO.,LTD. 1308 WoolimLions 2nd, Doksan Station St. 122, Geumcheon-Gu, Seoul, KOREA, 153-787 Standards : FCC Part 15 Subpart E §15.407 Test Date : 05/11/2010 ~ 05/24/2010 Test Results : PASS FAIL The test results relate only to the items tested. Tested by: Reviewed by: Kyu-Chul Shin KT Kang Test Engineer Technical Manager Date:05/24/2010 Date: 05/24/2010 THRU-KES CO.,LTD. 477-6, Hager-Ri, Yoju-Up, Yoju-Gun Kyunggi-Do,469-803, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 Test Report No.: TK-FR10020 Page 1 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr TABLE OF CONTENTS 1.0 General Product Description ............................................................................... 3 1.1 Tested Frequency ............................................................................................. 3 1.2 Model Differences ............................................................................................. 4 1.3 Device Modifications ......................................................................................... 4 1.4 Peripheral Devices ............................................................................................ 4 1.5 Calibration Details of Equipment Used for Measurement ......................................... 4 1.6 Test Facility...................................................................................................... 4 2.0 Summary of tests ............................................................................................. 5 2.1 Technical Characteristic Test ..................................................................................... 6 2.1.1 26dB Bandwidth - 15.407(a) ........................................................................ 6 2.1.2 Maximum peak Conducted Output Power-15.407(a)......................................... 8 2.1.3 Power Spectral Density-15.407(a) ............................................................... 12 2.1.4 Peak Excursion Measurement -15.407(a).................................................... 14 2.1.5 Radiated Emissions Measurement................................................................ 16 2.1.6 Frequency Stability Measurement 15.407(g) ................................................... 21 2.1.8 AC Conducted Emissions 15.207 ................................................................. 23 APPENDIX A – Test Equipment Used For Tests ................................................................ 26 Test Report No.: TK-FR10020 Page 2 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 1.0 General Product Description Equipment model name : GWAV8141K Serial number : Prototype EUT condition : Pre-production, not damaged : Internal Antenna (Supporting MIMO) : Antenna type Patch antenna Gain 0.667dBi Frequency Range : 5150MHz ~ 5250MHz(OFDM) RF output power : 12.98 dBm Peak Conducted (40MHz) Number of channels :2 Channel Spacing : 40 MHz Transfer Rate : 270Mbps Type of Modulation : 64-QAM for OFDM Power Source : DC 12V Ant. A-1 ANT. A-2 1.1 Tested Frequency 38ch 46ch Frequency (MHz) 5190 5230 Test Report No.: TK-FR10020 Page 3 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 1.2 Model Differences - 1.3 Device Modifications The following modifications were necessary for compliance: Not applicable 1.4 Peripheral Devices Device Manufacturer Model No. Serial No. FCC ID or DoC EUT ATEN Technology, Inc., GWAV8141K - - dba IOGEAR Notebook F U J I T S U L T D LIFEBOOK S-5582 434230343466 DoC 1.5 Calibration Details of Equipment Used for Measurement Test equipment and test accessories are calibrated on regular basis. The maximum time between calibrations is one year or what is recommended by the manufacturer, whichever is less. All test equipment calibrations are traceable to the Korea Research Institute of Standards and Science (KRISS), therefore, all test data recorded in this report is traceable to KRISS. 1.6 Test Facility THRU-KES Co.,Ltd. (Test Site # : 343818) 477-6, Hager-Ri, Yoju-Up, Yoju-Gun Kyunggi-Do,469-803, Korea Test Report No.: TK-FR10020 Page 4 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.0 Summary of tests FCC Part Status Parameter Limit Section(s) (note 1) 15.407(a) 26dB Spectrum Bandwidth - C Maximum Conducted Output 15.407(a) < 50mW C Power 15.407(a) Power Spectral Density > 4 dBm C 15.407(a) Peak Excursion > 13 dB C C 15.407(b) Radiated Emissions < -27dBm @ EIRP C 15.407(b) Band Edge Emissions < 80 dBuV C 15.407(g) Frequency Stability 20ppm C AC Power Line Conducted 15.207 EN 55022 C Emissions The sample was tested according to the following specification: - FCC Part 15.407, ANSI C63.4-2003 Test Report No.: TK-FR10020 Page 5 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.1 Technical Characteristic Test 2.1.1 26dB Bandwidth - 15.407(a) Procedure: 1. The transmitted output (antenna port) was connected to the spectrum analyzer in peak hold mode 2. The resolution bandwidth of 300kHz and the video bandwidth of 1000kHz were used 3. Measured the spectrum width with power higher than 26dB below carrier 4. Measuring multiple antenna, the connector is required to link with spectrum analyzer through a combiner The spectrum analyzer is set to: Center frequency = 38ch , 46ch RBW = 300 kHz Span = >26dB Bandwidth VBW = 1000 kHz Sweep = auto Trace = max hold Detector function = peak -26dB Bandwidth Configuration Draft n Ant. A-1+A-2 Test Results Frequency Channel Mode (MHz) No. 26dB Bandwidth 99% Occupied (MHz) Bandwidth(MHz) 5190 38 38.08 35.20 n Mode 5230 46 38.40 35.36 - See next pages for actual measured spectrum plots. Limit: No restriction limits. Test Report No.: TK-FR10020 Page 6 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 26dB Bandwidth Plot on Configuration Draft n 40MHz ANT. A-1+A-2/5190MHz 26dB Bandwidth Plot on Configuration Draft n 40MHz ANT. A-1+A-2/5190MHz Test Report No.: TK-FR10020 Page 7 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.1.2 Maximum peak Conducted Output Power-15.407(a) Test Location RF Test Room Procedures The transmitter output is connected to a spectrum analyzer and the analyzer’s internal channel power integration function is used to integrate the power over a bandwidth greater than or equal to the 99% bandwidth. EUT Spectrum Analyzer Test Results Configuration Draft n 40MHz ANT. A-1 Frequency Peak output Channel No. Limit Result (MHz) power(dBm) 5190 38 8.09 17dBm(50mW) Complies 5230 46 6.19 17dBm(50mW) Complies Configuration Draft n 40MHz ANT. A-2 Frequency Peak output Channel No. Limit Result (MHz) power(dBm) 5190 38 6.73 17dBm(50mW) Complies 5230 46 5.37 17dBm(50mW) Complies Configuration Draft n 40MHz ANT. A-1+A-2 Frequency Peak output Channel No. Limit Result (MHz) power(dBm) 5190 38 12.39 17dBm(50mW) Complies 5230 46 12.98 17dBm(50mW) Complies See next pages for actual measured spectrum plots. Limit : < 17dBm Test Report No.: TK-FR10020 Page 8 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Peak Conducted Output Power Plot on Configuration Draft n 40MHz ANT. A-1/5190 Peak Conducted Output Power Plot on Configuration Draft n 40MHz ANT. A-1/5230 Test Report No.: TK-FR10020 Page 9 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Peak Conducted Output Power Plot on Configuration Draft n 40MHz ANT. A-2/5190 Peak Conducted Output Power Plot on Configuration Draft n 40MHz ANT. A-2/5230 Test Report No.: TK-FR10020 Page 10 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Peak Conducted Output Power Plot on Configuration Draft n 40MHz ANT. A-1+A2/5190 Peak Conducted Output Power Plot on Configuration Draft n 40MHz ANT. A-1+A2/5230 Test Report No.: TK-FR10020 Page 11 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.1.3 Power Spectral Density-15.407(a) Procedure: The peak power density is measured with a spectrum analyzer connected to the antenna terminal while the EUT is operating in transmission mode at the appropriate frequencies. The spectrum analyzer is set to: RBW = 1000 kHz VBW = 3000kHz Sweep = Auto Span = 60 MHz Detector function = Sample Trace = Average Measurement Data: Configuration Draft n 40MHz ANT. A-1+A2 Frequency Test Results Mode Ch. (MHz) dBm Result 5190 38 -5.72 Complies n Mode 5230 46 -10.23 Complies Limit: Power Spectral Density < 4dBm See next pages for actual measured spectrum plots. Test Report No.: TK-FR10020 Page 12 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Power Density Plot on Configuration Draft n 40MHz ANT. A-1+A2/5190 Power Density Plot on Configuration Draft n 40MHz ANT. A-1+A2/5230 Test Report No.: TK-FR10020 Page 13 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.1.4 Peak Excursion Measurement -15.407(a) Procedure: 1. The transmitter Output(antenna port) was connected to the spectrum analyzer 2. Set the spectrum analyzer span to view the entire emissions bandwidth. The largest difference between the following two traces (Peak Trace and Average Trace) must be ≤13 dB for all frequencies across the emissions bandwidth. Submit a plot. 3. Peak Trace : Set RBW=1MHz, VBW≥3MHz with peak detector and max-hold settings 4. Average Trace: Method #3-vido averaging with max hold and sum power across the band. Set span to encompass the entire emissions bandwidth[EBW] of the signal. Set sweep trigger to ‘free run’. Set RBW=1MHz. Set VBW ≥ 1/T(Draft n VBW=300kHz ≥1/4㎲). Use sample detector mode if bin width(i.e.,span/number of points in spectrum) <0.5RBW. Otherwise use peak detector mode. Set max hold. Allow max hold to run for 60 seconds. 5. Measuring multiple antennas, the connector is required to link with spectrum analyzer through a combiner The spectrum analyzer is set to: RBW = 1000 kHz(Peak Trace) / 1000kHz(Average Trace) VBW = 3000 kHz(Peak Trace) / 300kHz(Average Trace) Detector function = Peak (Peak Trace) / Sample (Average Trace) Trace = Max hold Sweep = 60s Span Frequency = Encompass the entire emissions bandwidth (EBW) of the signal Measurement Data: Configuration Draft n 40MHz ANT. A-1+A2 Frequency Test Results Mode Ch. (MHz) dB Result 5190 38 5.20 Complies n Mode 5230 46 5.19 Complies Limit Peak Excursion: 13dB See next pages for actual measured spectrum plots. Test Report No.: TK-FR10020 Page 14 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Peak Excursion Plot on Configuration Draft n 40MHz ANT. A-1+A2/5190 Peak Excursion Plot on Configuration Draft n 40MHz ANT. A-1+A2/5230 Test Report No.: TK-FR10020 Page 15 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.1.5 Radiated Emissions Measurement Test Location Testing was performed at a test distance of 3 meter Open Area Test Site Test Procedures The height of the measuring antenna was varied between 1 to 4 m and the table was rotated a full revolution in order to obtain maximum values of the electric field intensity. The measurement was made in both the vertical and horizontal polarization, and the maximum value is presented in the report. The spectrum analyzer is set to: Below 1GHz : RBW=100KHz/VBW=300KHz/Sweep=AUTO Above 1GHz: (a) PEAK:RBW=VBW=1MHz/Sweep=AUTO (b) AVERAGE:RBW=1MHz/VBW=10Hz/Sweep=AUTO Note : The amplitudes of spurious emissions that are attenuated more than 20dB below the limit have not been reported Test Report No.: TK-FR10020 Page 16 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Limit -15.407(b) (1) For transmitters operating in the 5.15~5.35 GHz band: all emissions outside of the 5.15 ~ 5.35GHz band shall not exceed an EIRP of -27dBm/MHz [80 dBuV/m@3m] - 15.209(a),15.205 Frequency(MHz) Field Strength uV/m@3m Field Strength dBuV/m@3m 30-88 100** 40 88-216 150** 43.5 216-960 200** 46 Above 960 500 80 ** Except as provided in 15.209(g).fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72MHz, 76-88MHz, 174-216MHz, 470-806MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g.15.231 and 15.241. Test Report No.: TK-FR10020 Page 17 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Test Results EUT Wireless HD Kit Measurement Detail Model GWAV8141K Frequency Range Below 1000MHz Channel - Detector function Quasi-Peak The requirements are: Complies Frequency Measured Data Margin Remark (MHz) (dBuV/m) (dB) 49.8 38.7 -1.3 Quasi-Peak Test Data Field Emission Meter Ant. Correction Cable Strengt Margin Limit No Frequency Reading Polaritr Factor Loss h (dBuv) (dBuv/m) (MHz) dBuV/m y dB dB (dBuv/m 1 49.80 21.2 V 13.6 4.0 38.7 -1.3 40.0 2 125.10 22.9 H 12.5 2.4 37.8 -5.7 43.5 3 200.24 23.3 H 9.9 2.9 36.1 -7.4 43.5 4 462.50 23.2 H 16.0 4.1 43.3 -2.7 46.0 5 466.99 23.8 V 16.1 4.1 44.0 -2.0 46.0 6 467.20 24.3 H 16.1 4.1 44.4 -1.6 46.0 7 480.60 22.8 H 16.3 4.1 43.1 -2.9 46.0 8 713.70 16.8 H 19.8 4.9 41.5 -4.5 46.0 9 751.00 16.3 H 20.3 5.0 41.5 -4.5 46.0 10 793.00 15.3 H 20.7 5.2 41.2 -4.8 46.0 11 793.50 16.1 H 20.7 5.2 42.0 -4.0 46.0 12 867.80 16.3 H 21.3 5.5 43.1 -2.9 46.0 13 921.40 13.1 V 21.9 5.6 40.7 -5.3 46.0 14 928.90 10.3 V 22.0 5.6 37.9 -8.1 46.0 Test Report No.: TK-FR10020 Page 18 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Test Results EUT Wireless HD Kit Measurement Detail Model GWAV8141K Frequency Range 1-40GHz Channel 36 Detector function Average/Peak The requirements are: Complies Frequency Measured Data Margin Remark (MHz) (dBuV/m) (dB) - - - Average/Peak Test Data – Configuration Draft n 40MHz ANT. A-1 Correction Limits/ Reading Result Frequency Height Detector A/P Pol. Factor A/P A/P [MHz] [dBuV/m] [m] Antenna Amp.Gain Cable [dBuV/m] [dBuV/m] No emissions were detected at a level greater than 20dB below limit. Test Data – Configuration Draft n 40MHz ANT. A-2 Correction Limits/ Reading Result Frequency Height Detector A/P Pol. Factor A/P A/P [MHz] [dBuV/m] [m] Antenna Amp.Gain Cable [dBuV/m] [dBuV/m] No emissions were detected at a level greater than 20dB below limit. Restricted band edge test data Correction Frequency Reading Height Limits Result Factor Pol. Amp. [MHz] [dBuV/m] [m] Antenna Cable [dBuV/m] [dBuV/m] Gain No emissions were detected at a level greater than 20dB below limit. Test Report No.: TK-FR10020 Page 19 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Test Results EUT Wireless HD Kitr Measurement Detail Model GWAV8141K Frequency Range 1-40GHz Channel 48 Detector function Average/Peak The requirements are: Complies Frequency Measured Data Margin Remark (MHz) (dBuV/m) (dB) - - - Average/Peak Test Data – Configuration Draft n 40MHz ANT. A-1 Correction Limits/ Reading Result Frequency Height Detector A/P Pol. Factor A/P A/P [MHz] [dBuV/m] [m] Antenna Amp.Gain Cable [dBuV/m] [dBuV/m] No emissions were detected at a level greater than 20dB below limit. Test Data – Configuration Draft n 40MHz ANT. A-2 Correction Limits/ Reading Result Frequency Height Detector A/P Pol. Factor A/P A/P [MHz] [dBuV/m] [m] Antenna Amp.Gain Cable [dBuV/m] [dBuV/m] No emissions were detected at a level greater than 20dB below limit. Restricted band edge test data Correction Frequency Reading Height Limits Result Pol. Factor Amp. [MHz] [dBuV/m] [m] Antenna Cable [dBuV/m] [dBuV/m] Gain No emissions were detected at a level greater than 20dB below limit. Test Report No.: TK-FR10020 Page 20 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.1.6 Frequency Stability Measurement 15.407(g) Procedures 1. The transmitter output (antenna port) was connected to the spectrum analyser. 2. EUT have transmitted absence of modulation signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire absence of modulation emissions bandwidth. 4. Set RBW = 10 kHz, VBW = 10 kHz with peak detector and max hold settings. 5. fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 106 ppm and the limit is less than ±20ppm (Draft n specification). 6. The test extreme voltage is to change the primary supply voltage from 85 to 115 percent of the nominal value 7. Extreme temperature rule is -30°C~50°C. 8. Measuring multiple antennas, the connector is required to link with spectrum analyser through a combiner The spectrum analyzer is set to: RBW /VBW= 10kHz Span = Entire absence of modulation emissions bandwidth Sweep = auto Test Setup Layout EUT Spectrum Analyzer Test Report No.: TK-FR10020 Page 21 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Measurement Data: Temperature vs. Frequency Stability Temperature Measurement Frequency (MHz) (℃) 5190 -10 5189.995595 0 5189.991505 10 5189979043 20 5189.971572 30 5189.943853 40 5189.937430 50 5189.929765 +15% voltage 5189.930931 -15% voltage 5189.930465 Max. Deviation (MHz) 0.070235 Max. Deviation (ppm) 12.056 Limit : 20ppm Test Report No.: TK-FR10020 Page 22 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr 2.1.8 AC Conducted Emissions 15.207 Test Location Shielded Room Frequency Range of Measurement 150 kHz to 30 MHz Instrument Settings IF Band Width: 9 kHz Test Procedures The EUT was placed on a non-metallic table 0.8m above the metallic, grounded floor and 0.4m from the reference ground plane wall. The distance to other metallic surfaces was at least 0.8m. Amplitude measurements were performed with a quasi-peak detector and an average detector. Limit - 15.207(a) Frequency Conducted Limit (dBuV) (MHz) Quasi-peak Average 0.15 ~ 0.5 66 to 56* 56 to 46* 0.5 ~ 5 56 46 5 ~ 30 60 50 * Decreases with the logarithm of the frequency. Test Results The requirements are: Complies Frequency Measured Data Margin Remark (MHz) (dBuV/m) (dB) 0.156 51.51 14.16 Quasi-peak Test Report No.: TK-FR10020 Page 23 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Test Data 측정주파수 보정 계수 준첨두값 평균값 극성 [MHz] LISN 케이블 제한값 측정값 결과값 제한값 측정값 결과값 0.156 0.08 0.13 H 66 51.30 51.51 56 37.03 37.24 0.180 0.10 0.18 N 64 49.77 50.05 54 25.03 25.31 0.249 0.08 0.13 N 62 43.99 44.20 52 29.43 29.64 0.276 0.06 0.11 H 61 42.21 42.38 51 33.52 33.69 0.309 0.07 0.10 N 60 39.54 39.71 50 21.34 21.51 0.498 0.05 0.10 H 56 36.31 36.46 46 28.27 28.42 0.528 0.05 0.10 N 56 33.36 33.51 46 22.51 22.66 1.116 0.06 0.07 H 56 32.11 32.24 46 22.51 22.64 1.194 0.06 0.06 N 56 27.37 27.49 46 16.77 16.89 1.410 0.06 0.04 H 56 32.19 32.29 46 23.03 23.13 1.764 0.06 0.01 H 56 30.82 30.89 46 22.38 22.45 4.179 0.11 0.04 N 56 27.16 27.31 46 18.56 18.71 7.707 0.21 0.10 N 60 33.45 33.76 50 26.26 26.57 8.445 0.25 0.03 H 60 32.49 32.77 50 25.05 25.33 14.151 0.50 0.10 N 60 30.36 30.96 50 25.57 26.17 16.230 0.55 0.10 H 60 27.84 28.49 50 24.34 24.99 20.730 0.91 0.11 N 60 27.84 28.87 50 19.65 20.68 20.820 0.88 0.11 H 60 25.82 26.81 50 17.94 18.93 Test Report No.: TK-FR10020 Page 24 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr [HOT] [NEUTRAL] Test Report No.: TK-FR10020 Page 25 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr APPENDIX A – Test Equipment Used For Tests No Description Manufacturer Model No. Serial No. Due Cal. 1 Test Receiver Rohde & Schwarz ESHS 10 862970/018 2011.05.06 2 Test Receiver Rohde & Schwarz ESVS 10 826008/014 2011.05.06 3 Spectrum Analyzer Hewlett Packard 8566B 2311A02394 2011.05.06 4 Spectrum Analyzer Rohde & Schwarz FSP13 100130 2011.05.06 5 Modulation Analyzer Hewlett Packard 8901B 3438A05094 2011.05.06 6 Audio analyzer Hewlett Packard 8903B 3011A12915 2011.05.06 7 Preamplifer Hewlett Packard 8447F 2805A02570 2011.05.06 8 Preamplifer A.H. Systems PAM-0118 164 2011.05.06 9 Signal Generator Hewlett Packard 8673D 2708A00448 2011.05.06 10 Power Meter Hewlett Packard 437B 312U24787 2011.05.06 11 Power Sensor Hewlett Packard 8482B 3318A06943 2011.05.06 12 Loop Antenna Rohde & Schwarz HFH2-Z2.335.4711.52 826532/006 2011.02.06 13 Dipole Antenna Rohde & Schwarz VHAP 574 2010.07.07 14 Dipole Antenna Rohde & Schwarz VHAP 575 2010.07.17 15 Dipole Antenna Rohde & Schwarz UHAP 545 2010.07.17 16 Dipole Antenna Rohde & Schwarz UHAP 546 2010.07.07 17 Biconical Antenna Eaton Corp. 94455-1 0977 2010.07.03 18 Biconical Antenna EMCO 3104C 9111-2468 2010.07.03 19 Log Periodic Antenna EMCO 3146 2051 2010.06.05 20 Log Periodic Antenna EMCO 3146 8901-2320 2010.07.03 21 Horn Antenna A.H. Systems SAS-571 414 2011.03.16 22 Waveform Generator Hewlett Packard 33120A US34001190 2011.05.06 23 Digital Oscilloscope Tektronix TDS 340A B012287 2011.05.06 24 Dummy Load Bird Electronics 8251 11511 2011.05.06 Test Report No.: TK-FR10020 Page 26 of 26 Model No: GWAV8141K Applicant: ATEN Technology, Inc., dba IOGEAR This Report shall not be reproduced except in full without the written approval of THRU-KES

www.kes.co.kr Test Setup Photos and Configuration Conducted Voltage Emissions

www.kes.co.kr Radiated Electric Field Emissions


Document Created: 2010-06-02 12:07:08
Document Modified: 2010-06-02 12:07:08
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC